Zenesis Quartzite II Bridge Saw Blade – 14 in., 20 mm Segment
Zenesis Quartzite II Bridge Saw Blade – 14 in., 20 mm Segment
The Zenesis Quartzite II Bridge Saw Blade is a 14 in. wet-cut bridge saw blade with a 20 mm segment, a newly formulated soft metal bond and a super-heavy-duty core, built for chip-free cuts in quartzite as well as granite and engineered stone.
It is the second generation of the Zenesis quartzite blade. The soft bond releases spent diamond quickly so the blade keeps cutting in dense quartzite instead of glazing, and Zenesis pairs it with the strongest core it produces for near-zero deflection on aggressive cuts. The 14 in. carries 2 Breton pin holes and 1 Donatoni pin hole. The larger Zenesis Quartzite II Bridge Saw Blade – 16 in. is also stocked.
Key Features
- 14 in. blade diameter
- 20 mm segment height, patterned diamond
- 60/50 mm arbor
- 2 Breton pin holes and 1 Donatoni pin hole
- Newly formulated soft metal bond for quartzite
- Super-heavy-duty core for near-zero deflection
- Wet use only, bridge saw
- Zenesis materials: quartzite, engineered stone, granite
- Zenesis RPM chart recommends 1,700–2,000 RPM for 14 in. bridge saw blades
Not Recommended For
Marble and porcelain are not published for this line. Use the Zenesis M Bridge Saw Blade – 16 in., 10 mm Segment, for Marble on marble, and the Alpha Silencer III Bridge Saw Blade – 14 in., for Porcelain & Crystallized Glass on porcelain.
Who Is This For?
Fabricators cutting quartzite on a bridge saw who need the cleanest possible edge on hard, chip-prone material, and shops that also run granite and quartz through the same blade.
Frequently Asked Questions
What materials does the Quartzite II cut?
Zenesis publishes it for quartzite, engineered stone and granite.
How is it different from the original Zenesis Quartzite blade?
A newly formulated soft metal bond, the highest-quality diamond Zenesis uses, and a super-heavy-duty core for stability. Zenesis positions it for fabricators who demand the cleanest cuts on quartzite.
What pin holes does the 14 in. have?
2 Breton pin holes and 1 Donatoni pin hole.
What RPM should I run?
The Zenesis RPM chart recommends 1,700–2,000 RPM for a 14 in. bridge saw blade.
Is it suitable for marble or porcelain?
No. Neither is among the published materials. Use the Zenesis M Bridge Saw Blade for marble and a porcelain bridge saw blade such as the Alpha Silencer III Bridge Saw Blade – 14 in., for Porcelain & Crystallized Glass for sintered slabs.