WEHA Carbon Fiber Rodding – 1/8 in. x 3/8 in. x 328 ft., Roll
WEHA Carbon Fiber Rodding – 1/8 in. x 3/8 in. x 328 ft., Roll
WEHA Carbon Fiber Rodding is a 1/8 in. x 3/8 in. reinforcement rod supplied on a 328 ft. roll, the taller of the two Weha roll profiles stocked here. It is cut to length and bedded in a slot with rodding adhesive to reinforce seams, sink cut-outs and narrow spans.
The rod will not rust or stain the stone and bonds to both adhesive and stone. As with the narrower profile, the construction term is disputed: Weha's brand term is carbon fiber rodding, while Master Wholesale describes this MPN as a fiberglass profile with a high concentration of fiberglass strands and BB Industries lists the family as carbon fiberglass rodding. The disagreement is recorded here rather than resolved.
No Weha page for this MPN was reachable; the cross-section and roll length come from distributor listings and match the sibling profile's line page, so the figures are treated as inferred rather than manufacturer-confirmed.
Key Features
- 1/8 in. x 3/8 in. cross-section — deeper than the 1/8 in. x 1/4 in. roll
- 328 ft. roll, cut to any length at the bench
- Will not rust and will not stain the stone
- Bonds to rodding adhesive and to the stone
What's Included
- 1 roll of 1/8 in. x 3/8 in. rodding, 328 ft.
Who Is This For?
Fabricators who cut a deeper rodding slot and want more section depth in the rod than the 1/8 in. x 1/4 in. profile gives. If your shop cuts a 1/4 in. slot with a dedicated rodding blade, order the 1/8 in. x 1/4 in. roll (WEH 126487) instead — the WEHA 5 in. Diamond Turbo Rodding Blade (WEH 50289) is sized to that narrower profile.
Frequently Asked Questions
What is the difference between this roll and the 1/8 in. x 1/4 in. roll?
Both Weha rodding rolls are 328 ft. long and 1/8 in. thick. This one is 3/8 in. deep instead of 1/4 in., so it needs a deeper slot.
Will it rust or stain the stone?
No. Weha states the rodding will not rust and will not stain, which is why it replaces steel rod in countertop work.
Is it carbon fiber or fiberglass?
Weha's brand term is Carbon Fiber Rodding, but distributor descriptions of this MPN call it a fiberglass profile. The construction is not consistently published, so treat the name as a brand term.
How is it installed?
It is cut from the roll to length and bedded into a cut slot with a flowing rodding adhesive such as the MVP Polyester Rodding Adhesive (SSP 278-00520-25).