Alpha Twincur GEM-V Tsuya Final Polishing Wheel – 6 in., Hook & Loop
Alpha Twincur GEM-V Tsuya Final Polishing Wheel – 6 in., Hook & Loop
The Alpha Twincur GEM-V Tsuya Final Polishing Wheel is a 6 in. hook-and-loop final polishing wheel that finishes the Twincur GEM-V sequence. It carries no grit number because it is the final polishing step rather than a point in the grit sequence. Alpha lists the GEM-V line for granite, engineered stone and quartz surfaces, marble, limestone, concrete, crystallized glass and porcelain slabs, and states that Cosentino recommends it as a Dekton polishing system.
It is not a substitute for the grit sequence — a Tsuya wheel refines an already-polished edge and will not remove a saw cut or a coarse scratch. Run the Alpha Twincur GEM-V Polishing Wheel grits 50 through 3000 first.
Key Features
- 6 in. diameter
- Hook and loop attachment
- Final polishing wheel — no grit number
- Runs after the 3000 grit wheel in the GEM-V sequence
- Alpha: recommended by Cosentino as a Dekton polishing system
Who Is This For?
Shops chasing the last step of gloss on straight and beveled edges, particularly on Dekton and other sintered surfaces where a standard final polish falls short.
Frequently Asked Questions
What is a Tsuya wheel for?
It is the final polishing step in the Alpha Twincur GEM-V sequence, run after the 3000 grit wheel to lift the finish rather than to remove material.
What grit is it?
It has no grit number. Alpha lists it as the Tsuya final polishing wheel, separate from the 50 to 3000 grit sequence.
Will it fix a scratch?
No. A final polishing wheel refines an already-polished surface. Start at a coarse grit in the same line if there is a defect to remove.
Does it fit a Snail Lock machine?
Not directly — it is hook and loop. The Alpha Twincur GEM-V Hook & Loop Snail Lock Adapter, 6 in., carries it on a Snail Lock machine.