Omni Cubed Sink Hole Saver Edge V3 Reinforcement Rail – 6 ft.
Omni Cubed Sink Hole Saver Edge V3 Reinforcement Rail – 6 ft.
The Omni Cubed Sink Hole Saver Edge v3 in the 6 ft. length is a 72 in. x 3.5 in. x 6 in. reinforcement rail whose mechanical clamps grip the edge of a piece to keep it from flexing or breaking at a cutout during fabrication, transport and install. The clamps take material from 0.7 in. to 2.1 in. (18-53 mm) thick.
The 6 ft. rail is the middle length in the line and spans a sink cutout with support well past it on both sides. Being mechanical, it needs an accessible edge to clamp to - if the edge is boxed in, a surface-mounted vacuum rail is the right answer instead.
Key Features
- 72 in. rail, 3.5 in. x 6 in. section - spans a sink cutout with reach either side
- Mechanical edge clamps slide along the rail for placement around the cutout
- 0.7-2.1 in. (18-53 mm) clamping range
- No pump, battery or vacuum cups required
- Made in 4 ft., 6 ft. and 8 ft. rails with identical clamping range
What's Included
- One 72 in. reinforcement rail with sliding mechanical clamps
Who Is This For?
Fabricators and installers moving countertops with sink cutouts, cooktop cutouts or long backsplashes, where the piece is most likely to break at the narrowest section. It also suits shops that want reinforcement without a vacuum pump to charge or cups to seal.
Frequently Asked Questions
How long is the 6 ft. Sink Hole Saver Edge v3?
The rail measures 72 in. long with a 3.5 in. x 6 in. section.
What thickness of material can it clamp?
The Omni Cubed Sink Hole Saver Edge v3 has a 0.7-2.1 in. (18-53 mm) clamping range across all three rail lengths.
What is the difference between the Edge version and the vacuum versions?
The Edge version clamps mechanically onto the edge of the material, while the vacuum versions mount to the face of the piece using suction cups and need a pump or hand-pumped cups. Mechanical clamping needs an accessible edge; vacuum mounting does not.
Should I buy the 6 ft. or the 8 ft. rail?
Choose by the span you need supported rather than by the size of the cutout: the 8 ft. Sink Hole Saver Edge v3 rail carries support further out on a long island or a run with two cutouts.