Vincent Z35 Flat CNC Profile Wheel – Position 0 Segmented, 80 mm

The Vincent Z35 Flat CNC Profile Wheel is a 3.15 in. (80 mm) position 0 segmented roughing wheel that takes the sawn edge down to the profile line on countertop material before the shaping wheels run.

Diameter: 3.15 in. (80 mm) · Height: 1.38 in. (35 mm) · Bore: 1.38 in. (35 mm)

Vincent publishes no machining parameters we can attach to this part number: this part number is not listed anywhere in the 2026-I catalogue, so no family position table could be confirmed for it. Rather than print a figure from a neighbouring tool, we have left the feed rate, stock removal and spindle speed off this page.

Key Features

• Segmented rim for bulk removal — this is the first wheel in the set and the one that does the heavy cutting, not the one that sets the finish.
• The softer bond releases spent diamond as it wears instead of polishing over, so the wheel keeps cutting without glazing on dense material such as quartzite and porcelain.
• Fitment: 3.15 in. (80 mm) diameter, 1.38 in. (35 mm) working height, 1.38 in. (35 mm) bore. Vincent sizes its resin polishers to match the metals in the same set, so positions swap without re-setting the tool length.

Who Is This For

A high-production shop programming Z35 edges on a CNC and running them in volume. It is a metal-bond wheel: it cuts, and the finish comes from the resin positions that follow it.

It is not a polisher. Position 0 leaves a ground surface by design; the gloss comes from the resin positions that follow it. Do not try to close the surface by slowing this wheel down — that glazes the bond and shortens its life.

Frequently Asked Questions

What feed rate should I run this at?
We are not publishing one. This part number is not listed anywhere in the 2026-I catalogue, so no family position table could be confirmed for it — so any figure on this page would be carried over from a different tool. Vincent's application guide is organised by position and wheel type, and this part number could not be tied to a row in it.

Will it polish the edge?
No — positions 0–3 are metal bond. They cut the profile; the resin positions 4–6 polish it. Expect a ground surface off this wheel.

Will it hold up on quartzite and porcelain?
That is what the softer bond is for: it releases spent diamond rather than glazing, so the wheel keeps cutting on hard material. Vincent lists the range for countertop material.

What bore does it need?
1.38 in. (35 mm). That is the standard Vincent profile-wheel spindle fitting for this range.