Omni Cubed Pro-Dolly – 22 in. x 11 in. x 9 in., 750 lb Capacity per Dolly
Omni Cubed Pro-Dolly – 22 in. x 11 in. x 9 in., 750 lb Capacity per Dolly
The Omni Cubed Pro-Dolly HD1 is a 22 in. x 11 in. x 9 in. low-profile slab dolly rated at 750 lb per dolly, with an integrated clamp opening to 2.88 in. (73 mm), a 5.38 in. rail height and 8 in. non-marking flat-free tires. The whole dolly weighs 21 lb.
The low rail is what makes it useful indoors: a top sits close to the ground so it clears a standard doorway on the dolly. Each dolly is sold singly, and the 750 lb figure is published per dolly.
Key Features
- 750 lb capacity per dolly
- 5.38 in. rail height for doorway clearance
- 22 in. x 11 in. x 9 in., 21 lb
- Integrated clamp with a 2.88 in. (73 mm) opening
- 8 in. non-marking, flat-free tires
- Compatible with the Aqua-Jaw Carry Vise
What's Included
- One Pro-Dolly HD1
Who Is This For?
Installers moving finished tops through finished interiors, where headroom under a doorway matters more than ground clearance. Long tops are commonly run on two dollies so the load is carried at both ends.
Frequently Asked Questions
What is the capacity of the Pro-Dolly HD1?
Omni Cubed publishes 750 lb per dolly. Each unit is sold singly, so a pair of dollies is two purchases.
How low does the top sit?
The support rail sits 5.38 in. off the ground, which is what gives the clearance to roll a top through a standard doorway.
How thick a piece can the clamp hold?
The integrated clamp opens to 2.88 in. (73 mm).
Should I use one dolly or two?
A long top is usually run on two dollies so it is supported at both ends and does not pivot; a short piece can be moved on one.
What is better for outdoor and rough ground?
A low-profile dolly is built for finished interiors. For gravel, thresholds and site debris, an all-terrain cart such as the Omni Cubed Pro-Cart with 750 lb capacity has 14.5 in. of ground clearance and larger wheels.