Diamax Cyclone Superflex Series Wet Polishing Buff – 4 in., White
The Diamax Cyclone Superflex Series Wet Polishing Buff is a 4 in. white polishing buff for the final pass of a wet polishing sequence.
Diamax lists its buffs in the grit column of its polishing tables, at the end of the ladder: a buff finishes a surface the resin pads have already brought up rather than removing material.
Diamax publishes this line as a pair, a white buff and a black one, and publishes no guidance on which belongs on which stone. Shops generally keep the two apart so that buff residue never crosses between light and dark work; that is trade practice, not a manufacturer specification.
Key Features
- 4 in. white buff for the final pass of a wet sequence
- Superflex series
- Sold alongside the black buff in the same size
Not Recommended For
A buff will not take out a scratch — it is the step after the ladder, not a substitute for it. Work up through a resin ladder such as the Diamax Cyclone Premium R Series Wet Polishing Pad – 4 in., 3 mm Resin first.
Who Is This For?
Shops finishing edges who want the last of the haze off before the piece leaves the bench, and who keep a separate buff for light and dark work.
Frequently Asked Questions
What is a buff for?
The finish pass. Diamax lists its buffs at the end of the grit ladder, after the finest resin pad, and a buff will not take out a scratch that the resin steps left behind.
What is the difference between the black and the white buff?
Diamax publishes the two as a pair and states no difference in use. Shops normally keep one buff for dark stone and one for light so residue does not carry across.
What is the maximum RPM?
An RPM figure for this line is not published in any manufacturer or distributor table we could find. Treat any figure shown elsewhere as unconfirmed and stay inside the rating for your machine.