Diamax Cyclone Ultra Mesh Turbo Blade – 6 in., for Dekton, Porcelain & Ultra-Compact
Diamax Cyclone Ultra Mesh Turbo Blade – 6 in., for Dekton, Porcelain & Ultra-Compact
The Diamax Cyclone Ultra Mesh Turbo Blade is a 6 in. ultra-thin mesh turbo blade for cutting Dekton, porcelain and other ultra-compact surfaces on an angle grinder or hand-held tile saw.
The mesh turbo rim is thinner than a standard turbo segment, so it enters sintered material with less edge pressure — which is what stops the top surface chipping out.
Key Features
- 10 mm continuous mesh turbo rim
- Maximum 10,000 RPM
- Fits a 5/8 in. – 7/8 in. + 20 mm arbor
- Wet or dry use on an angle grinder or hand-held tile saw
Not Recommended For
Not the blade to buy for granite, marble or quartz. They appear on the manufacturer's capability list, but this is the sintered-material tool in the range: the bond is built to stay sharp in Dekton and porcelain, and a hard bond glazes on softer stone instead of releasing fresh diamond. For general-purpose granite and quartz cutting at the same size, use the TAHOE Turbo Blade – 6 in., Turbo Rim.
Who Is This For?
Installers and fabricators cutting Dekton, Neolith and porcelain panels on site, where a chipped face edge cannot be polished out afterwards.
Frequently Asked Questions
What does this blade cut?
Dekton, porcelain and other ultra-compact surfaces. Diamax builds the mesh turbo rim for sintered material specifically.
Can I cut granite or quartz with it?
It is not recommended. A hard-material bond glazes on softer stone; use a granite and quartz blade such as the TAHOE Turbo Blade – 6 in., Turbo Rim instead.
Wet or dry?
Both. Diamax publishes wet or dry use for the Cyclone Ultra Mesh Turbo range, though wet cutting extends rim life and controls dust.
What is the maximum RPM?
The 6 in. blade is rated to a maximum of 10,000 RPM.