Cyclone Ultra Blade – 16 in., 10 mm Segment, for Dekton, Porcelain & Ultra-Compact
Cyclone Ultra Blade – 16 in., 10 mm Segment, for Dekton, Porcelain & Ultra-Compact
The Cyclone Ultra Blade by Diamax is a 16 in. bridge saw blade with a 10 mm segment for cutting Dekton, porcelain and other ultra-compact slabs wet on a bridge saw.
Diamax publishes this blade for Dekton, Neolith, Techlam, Laminam, Lapitec and other ultra-compact surfaces. It runs wet only; the segment is not designed to shed heat in a dry cut.
Key Features
- 10 mm segment on a 16 in. core, for ultra-compact and porcelain slab work
- Fits a 60/50 mm bridge saw arbor
- Maximum 2,400 RPM
- Wet cutting only
Not Recommended For
Not the blade to buy for quartz, granite or marble. They appear on the manufacturer's capability list, but this is the sintered-material tool in the range: the bond is built to stay sharp in Dekton and porcelain, and a hard bond glazes on softer stone instead of releasing fresh diamond. For general slab cutting in quartz and granite on the same saw, use the BRUIN Bridge Saw Blade – 16 in. Diameter, 25 mm Segment.
Who Is This For?
Fabrication shops running sintered and ultra-compact slabs on a bridge saw, where a dedicated hard-material blade earns its keep against chipping on the exit edge.
Frequently Asked Questions
What materials is this blade for?
It is published for Dekton, Neolith, Techlam, Laminam, Lapitec and other ultra-compact surfaces, plus porcelain. It is not a general-purpose quartz or granite blade.
Can it be run dry?
No. Diamax specifies wet use only for the Cyclone Ultra bridge saw range.
What arbor does it take?
It takes a 60/50 mm bridge saw arbor.
What is the maximum RPM?
The 16 in. blade is rated to a maximum of 2,400 RPM.
Should I use this blade on quartz?
No. Use a quartz-rated bridge saw blade such as the BRUIN Bridge Saw Blade – 16 in. Diameter, 25 mm Segment; the Ultra bond is built for sintered material and glazes on softer stone.