Diamax Cyclone Turbo Blade – 4-1/2 in., for Granite & Quartz
The Diamax Cyclone Turbo Blade is a 4-1/2 in. turbo blade with an 8 mm x 2.4 mm segment for cutting granite and quartz on an angle grinder or hand saw.
The turbo segment is the general-purpose choice in the Diamax hand-tool range: it cuts fast in hard stone and leaves an edge that cleans up without much work.
Key Features
- 8 mm x 2.4 mm turbo segment
- Fits a 5/8 in. – 7/8 in. + 20 mm arbor
- Maximum 13,000 RPM
- Wet or dry cutting
Not Recommended For
Not recommended for porcelain or ultra-compact surfaces such as Dekton — a granite bond chips the glazed face. For those, use the Diamax Cyclone Porcelain Turbo Blade – 4-1/2 in., for Ultra-Compact. On marble, the Diamax Cyclone Electroplated Marble Blade – 5 in. leaves a cleaner edge.
Who Is This For?
Fabricators and installers making straight cuts, seam cuts and on-site trims in granite and quartz with a hand grinder.
Frequently Asked Questions
What materials does this blade cut?
Granite and quartz (engineered stone). Diamax publishes the Cyclone turbo segment for those two.
Wet or dry?
Both. Wet cutting is slower to load the segment and keeps dust down; dry cutting is fine for short trims.
What is the maximum RPM?
The 4-1/2 in. blade is rated to a maximum of 13,000 RPM.
Will it fit my grinder?
It uses a 5/8 in. – 7/8 in. + 20 mm arbor, which is the standard Diamax hand-blade arbor set.
Can I use it on porcelain?
No — use a porcelain blade such as the Diamax Cyclone Porcelain Turbo Blade – 4-1/2 in., for Ultra-Compact. A segment bonded for natural stone chips the glazed face on those materials.