Diamax Cyclone Porcelain Turbo Blade – 3-1/2 in., 14,000 RPM, for Ultra-Compact
Diamax Cyclone Porcelain Turbo Blade – 3-1/2 in., 14,000 RPM, for Ultra-Compact
The Diamax Cyclone Porcelain Turbo Blade is a 3-1/2 in. turbo blade with a porcelain-bonded rim for cutting porcelain tile and ultra-compact panels.
The rim is bonded for glazed, brittle surfaces: it cuts porcelain and sintered panels without the face chipping that a segment bonded for natural stone causes.
Key Features
- Turbo rim bonded for porcelain and ultra-compact panels
- 5/8 in. – 7/8 in. – 20 mm arbor
- Maximum 14,000 RPM
- Bushing BS57820D supplied for smaller spindles
- Wet or dry cutting
Not Recommended For
Not recommended for granite, quartz or marble — a porcelain bond glazes over on softer stone. For general-purpose granite and quartz, use the Diamax Cyclone Turbo Blade – 4-1/2 in., for Granite & Quartz.
Who Is This For?
Tile setters and fabricators cutting porcelain slabs, large-format tile and sintered panels, on site or at the bench.
Frequently Asked Questions
What does this blade cut?
Porcelain tile and ultra-compact panels such as Dekton and Neolith.
Can I cut granite with it?
It is not recommended. A porcelain bond glazes on softer stone; use a granite blade such as the Diamax Cyclone Turbo Blade – 4-1/2 in., for Granite & Quartz.
Wet or dry?
Both. Wet cutting is strongly preferred on large-format porcelain to control heat at the edge of the cut.
What is the maximum RPM?
The 3-1/2 in. blade is rated to a maximum of 14,000 RPM.
Does it fit a bridge saw?
Diamax lists the 12 in. and larger items in this line as bridge saw blades. This line is otherwise published for angle grinder and hand saw use.