Diamax Super Cyclone Electroplated Marble Blade – 7 in.
Diamax Super Cyclone Electroplated Marble Blade – 7 in.
The Diamax Super Cyclone Electroplated Marble Blade is a 7 in. electroplated blade with side protection for cutting marble with a protected, thicker core.
Side protection carries diamond onto the flanks of the blade, which holds a 90-degree cut square, and the core is thick enough to take quad adapters.
Key Features
- Diamond side protection for a clean 90-degree cut
- Core thick enough for quad adapters
- Runs on an angle grinder or hand saw, wet or dry
Not Recommended For
If you only need straight cuts and want minimum kerf, the thinner Diamax Cyclone Electroplated Marble Blade – 7 in. costs less and removes less material. Side protection is worth paying for when the cut face has to stay square.
Who Is This For?
Marble fabricators cutting square edges and quad-mounted work where a thin plated blade wanders.
Frequently Asked Questions
What does side protection do?
It puts diamond on the flanks of the blade, which keeps a 90-degree cut square instead of letting the plate drift.
Will it take a quad adapter?
Yes. The core on this blade is thick enough for quad adapters, unlike the thin-core electroplated blade.
What is it for?
Cutting marble, on an angle grinder or hand saw, wet or dry.
What is the maximum RPM?
Diamax does not publish an RPM table for the Super Cyclone electroplated line in any source we hold; stay inside your grinder rating for the blade diameter.