Diamax Cyclone Quartzite Turbo Blade – 6 in., 10,185 RPM, for Granite & Quartz
Diamax Cyclone Quartzite Turbo Blade – 6 in., 10,185 RPM, for Granite & Quartz
The Diamax Cyclone Quartzite Turbo Blade is a 6 in. QZT turbo blade with a 9.5 mm x 2.4 mm rim for cutting quartzite, granite and quartz on an angle grinder or hand saw.
The QZT rim is 9.5 mm deep against the 8 mm segment on the standard Cyclone turbo blade — more diamond in reserve for dense quartzite, which is where a standard turbo rim wears out first.
Key Features
- 9.5 mm x 2.4 mm QZT rim, deeper than the 8 mm standard turbo segment
- Built for quartzite and hard granite
- 5/8 in. – 7/8 in. + 20 mm arbor
- Maximum 10,185 RPM
- Wet or dry cutting
Not Recommended For
Not recommended for porcelain or ultra-compact panels — this is a hard natural stone rim and it chips a glazed face. For those, use the Diamax Cyclone Porcelain Turbo Blade – 6 in., for Ultra-Compact.
Who Is This For?
Shops cutting quartzite by hand, where rim life on a standard turbo blade is the limiting cost.
Frequently Asked Questions
What makes this different from the standard Cyclone turbo blade?
The rim is 9.5 mm deep instead of 8 mm, and the bond is set up for quartzite and hard granite.
What materials does it cut?
Quartzite, granite and quartz (engineered stone).
What is the maximum RPM?
The 6 in. blade is rated to a maximum of 10,185 RPM.
What is the difference between this and the Cyclone QZT bridge saw blade?
This is the angle grinder and hand saw version, 4-1/2 in. to 7 in., wet or dry. The QZT Quartzite blade is the bridge saw version, 14 in. to 18 in., wet only. They are separate lines with separate item tables.