WEHA White Lion Quartzite Bridge Saw Blade – 14 in., 50/60 mm Bore, Bridge Saw, Wet
The WEHA White Lion Quartzite Bridge Saw Blade is a 14 in. wet bridge saw blade for cutting quartzite, quartz and granite. It is a bridge saw blade, not a grinder blade: it mounts on a bridge saw or sawjet arbor and is run with water.
This is the point where the White Lion line splits into two machine classes. The 5 in. and 6 in. White Lion blades (WEH 128900 and WEH 128901) are angle-grinder blades with a quad-hole arbor; this 14 in. blade will not fit a grinder and a grinder blade will not fit a bridge saw.
Key Features
- 14 in. diameter for a bridge saw
- Wet cutting
- Hard-stone line sold for quartzite, quartz and granite
- 50/60 mm bore per distributor listings — confirm against your saw flange before ordering, as the bore is not stated on a Weha page
Who Is This For?
Shops sawing quartzite, quartz and granite slabs on a 14 in. bridge saw. If you are cutting a finished top in place or making a cut-out with a hand grinder, this is the wrong blade: use the 5 in. or 6 in. White Lion grinder blade instead.
Frequently Asked Questions
What machine does a 14 in. White Lion blade fit?
It is a bridge saw blade, sized for a 14 in. bridge saw. It does not fit an angle grinder.
What is the bore?
Distributor listings state a 50/60 mm bore. That figure comes from distributors rather than from a Weha page, so check it against your saw arbor before ordering.
Can it be run dry?
No. This blade is sold as a wet bridge saw blade and should be run with water.
What blade should I use for the same material on a grinder?
For quartzite, quartz and granite on a hand-held grinder, use the WEHA White Lion Quartzite Diamond Turbo Blade in 5 in. (WEH 128900) or 6 in. (WEH 128901).
Is it the right blade for porcelain or Dekton on a bridge saw?
No. Ultra-compact material needs a porcelain-specific bridge saw blade such as the Alpha Silencer III Bridge Saw Blade, 14 in., for Porcelain & Crystallized Glass (ALP SLW1410P).