APEXX Vacuum Brazed Profiler B10 – 3/8 in. Roundover, 5/8 in.-11
APEXX Vacuum Brazed Profiler B10 – 3/8 in. Roundover, 5/8 in.-11
The APEXX Vacuum Brazed Profiler B10 cuts a 3/8 in. roundover profile and mounts on a 5/8 in.-11 thread. Ocean Diamond builds it in premium brazed diamond with a nylon guide that will not scratch stone surfaces, for angle grinders and air polishers with a central water feed. On the brazed profilers the number is the radius or size in inches — B10 is the 3/8 in. roundover.
The shape codes on the brazed profilers do not mean the same thing as the shape codes on the APEXX sintered router bits. On the router bits the number is slab thickness in centimeters, so a router bit V20 is a 2 cm slab bit, not a 2 in. bullnose. The two families are inconsistent with each other and the codes must never be read across.
Key Features
- B10 — 3/8 in. Roundover
- 5/8 in.-11 thread
- Premium vacuum brazed diamond
- Nylon guide that will not scratch stone surfaces
- For angle grinders and air polishers with a central water feed
- On brazed profilers the number is the radius or size in inches
- Ocean Diamond publishes B as roundover, E as bevel, F as ogee and V as bullnose on this family
Who Is This For?
Fabricators and installers profiling an edge by hand on an angle grinder or an air polisher with a water feed, where a CNC pass is not available or not worth setting up.
Frequently Asked Questions
What profile does it cut?
The B10 profiler cuts a 3/8 in. roundover.
What does the number in the code mean?
On the brazed profilers it is the radius or size in inches. Ocean Diamond publishes the roundovers as B5 = 3/16 in., B7 = 1/4 in., B10 = 3/8 in., B13 = 1/2 in., B15 = 5/8 in., B20 = 3/4 in., B25 = 1 in. and B30 = 3 cm, and the bevels as E6.5 = 1/4 in., E10 = 3/8 in. and E15 = 5/8 in.
Is a router bit V20 the same as a profiler V20?
No. On the sintered router bits the number is slab thickness in centimeters, not a radius. The two families use the same letters with different meanings.
What machine does it run on?
Ocean Diamond specifies angle grinders and air polishers with a central water feed, on a 5/8 in.-11 thread.
Will the guide mark the stone?
Ocean Diamond specifies a nylon guide that will not scratch stone surfaces.