Aardwolf Remnant Rack – 118-1/8 in. Long, 2,204 lb Working Load Limit
Aardwolf Remnant Rack – 118-1/8 in. Long, 2,204 lb Working Load Limit
The Aardwolf Remnant Rack is a hot-dipped galvanized floor rack with two 118-1/8 in. base rails, 29-1/8 in. high, rated to a 2,204 lb working load limit and supplied with its posts included.
Posts included is the fact worth reading twice, because Aardwolf sells slab rack posts individually as well. Each base rail carries 15 open pole holes, so the spacing between posts is set by where you place them rather than being fixed.
Key Features
- 2,204 lb working load limit (1,000 kg)
- Two base rails 118-1/8 in. long (3 m), 29-1/8 in. high (740 mm)
- 15 open pole holes per side, so remnant slots can be spaced to the pieces you actually keep
- Hot-dipped galvanized, which is why it survives a wet yard or an outdoor storage bay
- Posts included - Aardwolf's own name for it is Remnant Rack 3m (Posts Included)
- Net weight 184.7 lb
What's Included
- One remnant rack, posts included
Who Is This For?
Fabrication shops storing off-cuts and remnants upright where they can be seen and pulled, instead of stacked flat where the piece you want is always at the bottom.
The 2,204 lb limit is the constraint: this is a rack for remnants and part slabs, not for full slab bundles, and it should not be loaded like an A-frame. Full slabs going to site belong on the Aardwolf Transport Frame TF2000PC, which carries 2,756 lb per side and 5,511 lb total. If you already own a rack and only need to replace or add uprights, the Aardwolf Slab Rack Posts are sold separately at 63 in. high, and the Aardwolf Steel Post Base sets a 4-degree lean for posts in that height class.
Frequently Asked Questions
What is the working load limit of the Aardwolf Remnant Rack?
Aardwolf publishes a 2,204 lb (1,000 kg) working load limit for the ARR01 remnant rack.
Are the posts included?
Yes. Aardwolf's own product name for this rack is Remnant Rack 3m (Posts Included), and the sourced record confirms the rack ships with its posts.
How long is the rack?
The base rails are 118-1/8 in. long (3 m) and stand 29-1/8 in. high (740 mm). A distributor description of '10 ft long' is a rounding of the same 3 m measurement.
How many post positions does it have?
There are 15 open pole holes per side, so posts can be set at whatever spacing suits the remnants being stored.
Will it stand up to an outdoor yard?
The rack is hot-dipped galvanized, a finish chosen for corrosion resistance in wet and outdoor storage.