Zenesis Z-Turbo Blade – 6 in., 8 mm Segment, 7/8 in. Arbor, Wet/Dry
Zenesis Z-Turbo Blade – 6 in., 8 mm Segment, 7/8 in. Arbor, Wet/Dry
The Zenesis Z-Turbo Blade is a 6 in. narrow turbo blade for fast, clean wet or dry cutting of granite and engineered stone on an angle grinder, circular saw or tile saw.
The 6 in. is the size most shops run on a 6 in. grinder for sink cut-outs and seam trimming; it shares the 8 mm segment, narrow turbo rim and four flush-cut holes of the rest of the line. When the job is dense 3 cm quartzite rather than granite and quartz, the Zenesis Z-Max Turbo Blade – 6 in. has the taller 10 mm segment and oversized cooling holes for it.
Key Features
- 6 in. blade diameter
- 8 mm segment height, narrow turbo rim
- 7/8 in.-20 mm-5/8 in. arbor with four flush-cut holes and thunder hole
- Wet or dry cutting
- Runs on an angle grinder, circular saw or tile saw
- Zenesis materials: granite, engineered stone
- Maximum RPM is not published by Zenesis for this line and is not stated here
Not Recommended For
Porcelain and ultra-compact surfaces are not among Zenesis's published materials for the Z-Turbo; use a porcelain-specific blade such as the APEXX Eiffel Diamond Blade. Marble is not published either; the APEXX V-Slot Electroplated Marble Blade – 6 in., for Marble & Limestone is built for soft stone.
Who Is This For?
Fabricators and installers running a 6 in. grinder who want an affordable granite and quartz blade for cut-outs, trimming and tile-saw work.
Frequently Asked Questions
What materials does the Z-Turbo blade cut?
Zenesis publishes it for granite and engineered stone (quartz).
Can I run it dry?
Yes. Zenesis rates the Z-Turbo for wet or dry use. Wet cutting still extends segment life and keeps dust down.
What arbor does it fit?
A 7/8 in. arbor with 20 mm and 5/8 in. reducers, plus four flush-cut holes for a quad adaptor.
Will it cut porcelain or Dekton?
Porcelain and ultra-compact are not among the published materials for this blade. Use a porcelain-specific blade such as the APEXX Eiffel Diamond Blade instead.
What segment height does it have?
8 mm across every size in the Z-Turbo line.