Zenesis Z-Turbo Blade – 5 in., 8 mm Segment, 7/8 in. Arbor, Wet/Dry
Zenesis Z-Turbo Blade – 5 in., 8 mm Segment, 7/8 in. Arbor, Wet/Dry
The Zenesis Z-Turbo Blade is a 5 in. narrow turbo blade for fast, clean wet or dry cutting of granite and engineered stone on an angle grinder, circular saw or tile saw.
It is the value tier of the Zenesis small-blade range: an 8 mm segment on a narrow turbo rim that Zenesis designs to reduce chipping, with four flush-cut holes so it accepts a quad adaptor for flush cutting. For heavier work in 3 cm quartzite, step up to the Zenesis Z-Max Turbo Blade – 6 in., which carries a taller 10 mm segment and oversized cooling holes.
Key Features
- 5 in. blade diameter
- 8 mm segment height, narrow turbo rim
- 7/8 in.-20 mm-5/8 in. arbor with four flush-cut holes and thunder hole
- Wet or dry cutting
- Runs on an angle grinder, circular saw or tile saw
- Zenesis materials: granite, engineered stone
- Maximum RPM is not published by Zenesis for this line and is not stated here
Not Recommended For
Porcelain and ultra-compact surfaces are not among Zenesis's published materials for the Z-Turbo; use a porcelain-specific blade such as the APEXX Eiffel Diamond Blade – 5 in., for Porcelain & Ultra-Compact. Marble is not published either; the APEXX V-Slot Electroplated Marble Blade – 6 in., for Marble & Limestone is built for soft stone.
Who Is This For?
Fabricators and installers who need an affordable granite and quartz blade for grinder cut-outs, trimming and tile-saw work, and who go through blades fast enough that price per blade matters.
Frequently Asked Questions
What materials does the Z-Turbo blade cut?
Zenesis publishes it for granite and engineered stone (quartz).
Can I run it dry?
Yes. Zenesis rates the Z-Turbo for wet or dry use. Wet cutting still extends segment life and keeps dust down.
What arbor does it fit?
A 7/8 in. arbor with 20 mm and 5/8 in. reducers, plus four flush-cut holes for a quad adaptor.
Will it cut porcelain or Dekton?
Porcelain and ultra-compact are not among the published materials for this blade. Use a porcelain-specific blade such as the APEXX Eiffel Diamond Blade instead.
What segment height does it have?
8 mm across every size in the Z-Turbo line.