Diamax Cyclone Straight Edge Wheel – 4 in., 50 Grit, 8 mm Resin
Diamax Cyclone Straight Edge Wheel – 4 in., 50 Grit, 8 mm Resin
The Diamax Cyclone Straight Edge Wheel is a 4 in. straight edge wheel, 50 grit, for polishing straight edges through a grit ladder.
8 mm of resin on a 4 in. wheel, run through a grit ladder on an inline or edge polishing machine. No Diamax material block for this line could be verified, so match the wheel to the material the machine is already set up for.
Key Features
- 50 grit, 8 mm resin
- 4 in. diameter
- One step of the Diamax straight edge grit ladder
Not Recommended For
One grit will not bring an edge to gloss on its own — the stocked ladder runs 50, 100, 200, 400 and 3000, and Diamax also publishes 800 and 1500, which we do not stock. Skipping from 400 straight to 3000 leaves scratches. Where bleed onto pale stone matters, the white resin line (Diamax Cyclone White Resin Straight Edge Wheel – 4 in., 100 Grit) is the alternative.
Who Is This For?
Shops working a straight edge through a grit ladder on an inline or edge polishing machine.
Frequently Asked Questions
What grit is this wheel?
It is the 50 grit, with 8 mm of resin.
What materials is it for?
No Diamax material block for this line could be verified. It is a resin-bonded edge wheel, so match it to the material the machine is already set up for.
What is the maximum RPM?
An RPM figure for this line is not published in any manufacturer or distributor table we could find. Treat any figure shown elsewhere as unconfirmed and stay inside the rating for your machine.
What is the difference from the white resin wheel?
The bond. The white resin line uses a light-colored resin, which Diamax specifies where bleed onto pale stone matters. This is the standard resin wheel.