Diamax Cyclone V1 Cutter/Grinder Wheel – 4 in., Coarse 30 Grit, 5/8-11 Thread
Diamax Cyclone V1 Cutter/Grinder Wheel – 4 in., Coarse 30 Grit, 5/8-11 Thread
The Diamax Cyclone V1 Cutter/Grinder Wheel is a 4 in. cutter/grinder wheel, Coarse 30, for cutting and shaping stone edges.
A 4 in. combination wheel in Coarse 30 grit on a 5/8 in.-11 thread. It is sold for cutting and edge shaping; the published copy on this line states it is not intended for flat surface grinding.
Key Features
- Coarse 30 diamond
- Cutter/grinder wheel for cutting and edge shaping
- 5/8 in.-11 thread
- 4 in. diameter
Not Recommended For
Not a finishing tool and not a flat-surface wheel — a Coarse 30 leaves a scratch pattern that a resin wheel such as the Diamax Cyclone Hex Flat Resin Cup Wheel – 4 in., Medium 50 Grit has to clean up, and the published copy on this line warns against flat surface grinding.
Who Is This For?
Fabricators who want one coarse wheel for cutting and edge shaping rather than two tools.
Frequently Asked Questions
What is a cutter/grinder wheel?
A combination wheel for cutting and shaping an edge, rather than a blade or a cup wheel. It is not intended for flat surface grinding.
What grit is it?
It is the Coarse 30 step of the range.
What does it thread onto?
A 5/8 in.-11 thread — the standard grinder and polisher spindle.
What is the maximum RPM?
An RPM figure for this line is not published in any manufacturer or distributor table we could find. Treat any figure shown elsewhere as unconfirmed and stay inside the rating for your machine.