Diamax Cyclone Copper Edge Wheel – 5 in., 200 Grit
Diamax Cyclone Copper Edge Wheel – 5 in., 200 Grit
The Diamax Cyclone Copper Edge Wheel is a 5 in. copper edge wheel, 200 grit, for edge polishing on an auto-edge machine with a longer-lived copper bond.
A copper bond carries diamond longer than a resin bond at the same grit, which is why it is used in the working positions of an auto-edge sequence rather than at the finish end.
Key Features
- 200 grit in a copper bond
- 5 in. diameter
- Diamax publishes grit, item numbers, feed rate and pressures for this line
Not Recommended For
Not a finishing wheel — copper bonds work the edge, and the gloss comes from the resin positions behind them, such as the Diamax Cyclone Snail Lock Polishing Wheel – 4 in., Position 6, Resin Bond. Note that the legacy store title claimed a snail lock fitting; Diamax publishes no fitting column for this line at all, so the mount is unconfirmed.
Who Is This For?
Shops running an auto-edge machine who are replacing a worn working position rather than a finishing wheel.
Frequently Asked Questions
What does a copper bond do?
It holds diamond longer than resin at the same grit, so the wheel keeps working through more linear feet of edge.
What grit is it?
It is the 200 grit step of the ladder.
What fitting does it use?
Diamax does not publish a fitting for this line — its item table lists grit, item numbers, feed rate and pressures only. Confirm against your machine before ordering.
What is the feed rate?
Diamax publishes a feed rate and a pressure for each grit in this line on its own item table. Those figures are set at the machine, so check them against the table for the grit you are running.