Omni Cubed Sink Hole Saver Edge V3 Reinforcement Rail – 4 ft.
Omni Cubed Sink Hole Saver Edge V3 Reinforcement Rail – 4 ft.
The Omni Cubed Sink Hole Saver Edge v3 in the 4 ft. length is a 48 in. x 3.5 in. x 6 in. reinforcement rail that clamps to the edge of a piece to stop it flexing or snapping at a cutout during fabrication, transport and install. Its mechanical clamps take material from 0.7 in. to 2.1 in. (18-53 mm) thick.
This is the mechanical-clamp version of the Sink Hole Saver: the clamps grip the edge of the material, so there is no pump, no battery and no vacuum cup to seal. That also sets its limit - it needs an accessible edge to clamp to.
Key Features
- 48 in. rail, 3.5 in. x 6 in. section, sized for a single cutout or a run of backsplash
- Mechanical edge clamps slide along the rail so they can be set either side of the weak point
- 0.7-2.1 in. (18-53 mm) clamping range
- No pump, battery or vacuum cups - nothing to charge before a job
- Same rail profile and clamping range as the 6 ft. and 8 ft. models in the line
What's Included
- One 48 in. reinforcement rail with sliding mechanical clamps
Who Is This For?
Fabricators and installers moving countertops with sink cutouts, cooktop cutouts or long backsplashes, where the piece is most likely to break at the narrowest section. It also suits shops that want reinforcement without a vacuum pump to charge or cups to seal.
Frequently Asked Questions
What is the clamping range of the Sink Hole Saver Edge v3?
The Omni Cubed Sink Hole Saver Edge v3 clamps material from 0.7 in. to 2.1 in. (18-53 mm) thick.
How long is the 4 ft. model?
The rail is 48 in. long, with a 3.5 in. x 6 in. section.
Does this version use vacuum cups?
No. The Edge v3 is the mechanical version and clamps the edge of the material. The vacuum-cup versions in the same family are surface-mounted instead, which is what to use when the edge is not accessible - for example the Omni Cubed Sink Hole Saver V6 in the 7 ft. Auto configuration.
Which length should I buy?
Match the rail to the span you need to support: the Sink Hole Saver Edge v3 is made in 4 ft., 6 ft. and 8 ft. rails, all with the same 0.7-2.1 in. clamping range.