Sigma Series 4 NEX Pushing Incision Tile Cutter – 49.2 in. Cutting Capacity
Sigma Series 4 NEX Pushing Incision Tile Cutter – 49.2 in. Cutting Capacity
The Sigma Series 4 NEX 4EN is a manual tile cutter with a 49.2 in. (125 cm) cutting length that scores on the push stroke for cutting ceramic and porcelain tile.
Sigma describes the pushing incision as “easy and deep with minimum effort, perfect for rough, thick and large tiles”, which is the case this rail length is built for: 48 in. porcelain planks cut in a single pass, dry, with no saw water on a finished floor.
Key Features
- 49.2 in. (125 cm) cutting length — takes a 48 in. plank in one pass
- Pushing incision — Sigma's recommendation for rough, thick and large tiles
- Series 4 chassis, shared with the pulling-action UP models
- Unpowered: no cord, no water, no slurry to clean up indoors
Who Is This For?
Crews installing large-format porcelain planks and panels up to 49.2 in. who need a dry cut in an occupied building. Shorter formats are covered more cheaply by the 4BN at 24.4 in. (62 cm).
Frequently Asked Questions
Will the Sigma 4EN cut a 48 in. porcelain plank?
Yes — its cutting length is 125 cm, which computes to 49.21 in., so a 48 in. plank is scored in a single pass.
What does pushing incision mean?
The scoring head is pushed away from the operator across the tile rather than dragged back. Sigma states this gives an easy, deep score with minimum effort and recommends it for rough, thick and large tiles.
What if the panel is longer than 49 in.?
The Sigma Series 4 NEX 4FN is the next size up at 61 in. (155 cm) cutting length in the same pushing action.
Can a manual tile cutter make curved or L-shaped cuts?
No. A manual score-and-snap cutter makes straight and diagonal cuts only, because the tile breaks along a single scored line. Curves, L-notches and holes need a diamond blade on an angle grinder or a wet saw — the SLAYTEC Wasteland Ripper Diamond Tile Blade covers that work.