Diamax Cyclone Ultra Core Bit – 1/4 in., for Dekton, Porcelain & Ultra-Compact
Diamax Cyclone Ultra Core Bit – 1/4 in., for Dekton, Porcelain & Ultra-Compact
The Diamax Cyclone Ultra Core Bit is a 1/4 in. bit with a 2 in. usable length for opening small holes in Dekton, porcelain and other ultra-compact surfaces.
The title on this page reads Core Bit. Diamax's own item table for the Cyclone Ultra Core Bit line starts at 1 in. and lists no size below it, and this item number appears instead in the Cyclone Ultra Non Core Bit table — as its 1/2 in., 5/8 in. and 3/4 in. siblings are already titled. If you need a cored plug rather than a ground hole at this diameter, ask before ordering.
The specification below is the one Diamax publishes against this item number.
Key Features
- 1/4 in. diameter, 2 in. usable length
- 5/8 in.-11 thread — angle grinder, drill or air polisher
- Maximum 5,000 RPM wet, 2,500 RPM dry
- Wet or dry use
Not Recommended For
Not the bit to buy for granite, marble or quartz. They appear on the manufacturer's capability list, but this is the sintered-material tool in the range: the bond is built to stay sharp in Dekton and porcelain, and a hard bond glazes on softer stone instead of releasing fresh diamond. For granite and quartz at this diameter, the nearest equivalent in the catalogue is the Diamax Cyclone Non-Core Bit – 1/4 in., for Granite, Quartz & Porcelain.
Who Is This For?
Fabricators opening small fixture, anchor and cable holes in Dekton and porcelain panels.
Frequently Asked Questions
What materials is it for?
Dekton, porcelain and other ultra-compact surfaces.
Is this a coring or a non-coring bit?
Diamax lists this item number in its Cyclone Ultra Non Core Bit table, and its Cyclone Ultra Core Bit table starts at 1 in. The title on this page says Core Bit. Confirm with us before ordering if the distinction matters to the job.
What are the speed limits?
A maximum of 5,000 RPM wet and 2,500 RPM dry.
How deep can it go?
The usable length of the bit is 2 in.
What does it mount on?
Any 5/8 in.-11 thread spindle — angle grinder, drill or air polisher.