Omni Cubed Stealth Seamer Seam Setter – 5 in. Cups, Auto
Omni Cubed Stealth Seamer Seam Setter – 5 in. Cups, Auto
The Omni Cubed Nano Stealth Seamer Auto is a vacuum seam setter with 5 in. cups, sold as a pair of units with a vacuum pump and a storage case, for joining and leveling countertop sections. The smaller cups are the point of the model: they land on narrow pieces and reach into tight spaces where an 8 in. cup will not fit.
Its open frame and high-clearance driveshaft leave the joint reachable while the tool is loaded, so epoxy can be applied and cleaned off without unloading the seamer. Auto means a pump holds the vacuum in the cups instead of hand pumping.
Key Features
- 5 in. vacuum cups for small pieces and tight spaces
- Auto operation - vacuum pump supplies and holds the vacuum, with AC and battery adapters supplied
- Wide-open frame and high-clearance driveshaft keep the whole seam accessible during use
- Non-marking synthetic rubber cups
- Ships as two units, so both sides of the seam are set with one purchase
- Storage case included
What's Included
- Two Nano Stealth Seamer units
- Four cup covers
- Vacuum pump with AC and battery adapters
- Storage case
Who Is This For?
Fabricators and installers working small returns, vanity tops, backsplash sections and seams in confined runs where a large cup has nowhere to sit. Shops joining full-size kitchen tops and flattening warped material will get more leveling authority from the 8 in. cup models.
Frequently Asked Questions
How many units come in the box?
The Omni Cubed Nano Stealth Seamer Auto ships as two seam setter units with four cup covers, a vacuum pump with AC and battery adapters, and a storage case.
Why choose 5 in. cups over 8 in. cups?
5 in. cups fit on narrow pieces and into tight spaces where an 8 in. cup has no room to seal. On a full-size kitchen top with warp to pull out, the larger 8 in. cup models give more leverage - the Omni Cubed Stealth Seamer Seam Setter with 8 in. cups, Auto is that tool.
What does Auto mean on a Stealth Seamer?
Auto means the vacuum in the cups is supplied and maintained by a vacuum pump rather than being charged by hand, and the Auto kits ship with that pump and a case.
Can epoxy be applied with the tool in place?
Yes. The open frame and high-clearance driveshaft leave the seam reachable while the tool is loaded, so adhesive can be worked and cleaned without removing the seamer.
Is this the tool for a perpendicular joint?
No - for mitered aprons, butt-joints and compound corners, the 90-degree Stealth Seamer model is the one designed to pull a perpendicular seam.