Diamax Cyclone Polishing Drum Wheel – 2 in. x 2 in., 50 to 3000 Grit, Resin Bond, 3,000 RPM
Diamax Cyclone Polishing Drum Wheel – 2 in. x 2 in., 50 to 3000 Grit, Resin Bond, 3,000 RPM
The Diamax Cyclone Polishing Drum Wheel is a 2 in. x 2 in. resin drum wheel for wet edge polishing on sink cut-outs and inside curves. Select your grit above: 50, 100, 200, 400, 800, 1500 or 3000.
A drum polishes with its side rather than its face, which is how it reaches the inside of a sink cut-out. Diamax publishes the line as a resin drum and credits the rubber drum body for tread life and reduced vibration, and it recommends oscillating the wheel up and down so it wears evenly instead of grooving.
Key Features
- Available 50 to 3000 grit on a 2 in. x 2 in. resin drum, rubber bodied
- 5/8 in.-11 female (M18 x 2)
- Maximum 3,000 RPM
- Wet use, on a polisher or angle grinder
Not Recommended For
Not a flat-surface pad — a drum is for the inside of a cut-out and for curves. On flat work a resin pad such as the Diamax Cyclone Premium R Series Wet Polishing Pad – 4 in., 3 mm Resin is faster. Note the part numbering: the trailing digits are the grit, not a size — every wheel in this line is 2 in. x 2 in.
Who Is This For?
Fabricators polishing sink and cooktop openings, where a flat pad cannot reach the inside face.
Frequently Asked Questions
What is a drum wheel for?
Polishing the inside of sink cut-outs and tight curves, where a flat pad cannot reach the face.
Which grits are available?
50, 100, 200, 400, 800, 1500 and 3000. Choose the grit from the selector above. In this line the trailing digits of the part number are the grit — every wheel is 2 in. x 2 in.
What thread does it use?
It threads onto a 5/8 in.-11 female (M18 x 2).
What is the maximum RPM?
It is rated to a maximum of 3,000 RPM.
How should it be used?
Wet, oscillating up and down so the drum wears evenly rather than cutting a groove.