Diamax Cyclone Vacuum Brazed Wheel – 2 in. x 2 in., 30 Grit Coarse
Diamax Cyclone Vacuum Brazed Wheel – 2 in. x 2 in., 30 Grit Coarse
The Diamax Cyclone Vacuum Brazed Wheel is a 2 in. x 2 in. vacuum brazed wheel, 30 coarse grit, for fast shaping and stock removal on stone.
Vacuum brazing holds a single layer of diamond directly on the steel, so the whole grain is exposed. It cuts fast and it wears out when that one layer is gone — a shaping tool, not a long-life grinding wheel.
Key Features
- Single-layer brazed diamond, 30 coarse grit
- 2 in. x 2 in. wheel on a 5/8 in.-11 thread
- For shaping, chamfering and opening cut-outs
Not Recommended For
Not a polishing step and not a long-life grinding wheel — once the brazed layer is worn the wheel is done. For repeat production grinding a resin wheel such as the Diamax Cyclone Hex Flat Resin Cup Wheel – 4 in., Medium 50 Grit costs less per part.
Who Is This For?
Fabricators opening and shaping sink cut-outs and drain boards where speed matters more than wheel life.
Frequently Asked Questions
What does vacuum brazed mean?
A single layer of diamond is brazed directly to the steel rather than sintered into a segment, which exposes the whole grain and cuts fast.
What grit is this wheel?
It is the 30 coarse grit step of the ladder.
What does it thread onto?
A 5/8 in.-11 thread — the standard grinder and polisher spindle.
What is the maximum RPM?
An RPM figure for this line is not published in any manufacturer or distributor table we could find. Treat any figure shown elsewhere as unconfirmed and stay inside the rating for your machine.