Diamax Cyclone S RockBuster Cup Wheel – 4 in., 50 Grit, Rubber Body
Diamax Cyclone S RockBuster Cup Wheel – 4 in., 50 Grit, Rubber Body
The Diamax Cyclone S RockBuster Cup Wheel is a 4 in. cup wheel, 50 grit, rubber body, for grinding stone edges where the wheel has to follow a contour.
A rubber body flexes against the work and damps vibration, so the wheel follows a curved edge instead of chattering across it.
Key Features
- 50 grit diamond on a rubber body
- Rubber body damps vibration and follows a contour
- 4 in. diameter
Not Recommended For
A flexible body is the wrong choice for a dead-flat edge — it rolls the arris over. Where flatness matters, use an aluminum-bodied wheel at the same grade: the Diamax Cyclone S Resin Cup Wheel – 4 in., 50 Grit.
Who Is This For?
Fabricators working ogees, radii and inside curves where a rigid wheel bounces.
Frequently Asked Questions
What does the rubber body do?
It flexes against the work and damps vibration, so the wheel follows a curved edge instead of chattering.
What grit is this wheel?
It is the 50 grit step of the ladder.
What is the maximum RPM?
An RPM figure for this line is not published in any manufacturer or distributor table we could find. Treat any figure shown elsewhere as unconfirmed and stay inside the rating for your machine.
When should I use an aluminum-bodied wheel instead?
On flat edges and straight runs. A flexible body rounds the arris there; an aluminum-bodied wheel such as the Diamax Cyclone S Resin Cup Wheel – 4 in., 50 Grit holds it flat.