Diamax Cyclone R Series Wet Polishing Pad – 4 in., 3.5 mm Resin
Diamax Cyclone R Series Wet Polishing Pad – 4 in., 3.5 mm Resin
The Diamax Cyclone R Series Wet Polishing Pad is a 4 in. wet polishing pad with 3.5 mm resin for polishing granite and engineered stone with a thicker pad.
3.5 mm of resin instead of the usual 3 mm — more material to wear through, on the R Series tread pattern that is the best selling in the Diamax range.
Key Features
- 3.5 mm resin, thicker than the standard 3 mm pad
- R Series tread
- 4 in. pad, offered in 300 to 3000 grit
- Maximum 4,000 RPM
- Interchangeable with other Diamax wet polishing systems
- Wet use with an air polisher or angle grinder
Not Recommended For
Wet only. A thicker pad is more forgiving but slower to conform — for tight radius work the standard 3 mm Diamax Cyclone Premium R Series Wet Polishing Pad – 4 in., 3 mm Resin follows the curve better.
Who Is This For?
Shops that wear pads out quickly on flat and straight work and want more resin per pad.
Frequently Asked Questions
How thick is the resin?
3.5 mm, against 3 mm on the standard R Series pad.
What grits does this page carry?
Diamax publishes this line in 300 to 3000 grit; every step is a variant of this product.
Can I mix it with other Diamax pads?
Yes. Diamax states these pads may be used interchangeably with its other wet polishing systems.
What is the maximum RPM?
It is rated to a maximum of 4,000 RPM.