CUP WHEEL 4 INCH FINE TURBO
CUP WHEEL 4 INCH FINE TURBO
The Diamax Cyclone Turbo Cup Wheel in 4 in. Fine is a 100 grit turbo cup wheel with a steel body and a 5/8-11 thread, rated to 8,000 max RPM and used wet on an angle grinder or pneumatic polisher. Fine is the last of the three grades in the 4 in. Cyclone Turbo ladder.
Diamax lists these wheels for engineered stone and granite. Within the 4 in. line the grade is the only thing that changes: coarse 30 grit for the heaviest cut, medium 50 grit for general shaping, and this fine 100 grit for cleaning up a shaped edge before polishing starts.
Key Features
- 4 in. diameter, Fine grade, 100 grit
- 5/8-11 thread on a steel body
- 8,000 max RPM
- Wet use only
- Fits an angle grinder or a pneumatic polisher
- Finest of the three grades in the 4 in. Cyclone Turbo cup wheel range
What's Included
- 1 cup wheel
Who Is This For?
Fabricators shaping and dressing edges in engineered stone and granite who want a fine cut that leaves less work for the first polishing step. It is not the wheel for bulk stock removal — start coarser and finish here.
Frequently Asked Questions
What grit is the Fine Cyclone Turbo cup wheel?
100 grit. In Diamax's 4 in. Cyclone Turbo range, coarse is 30 grit, medium is 50 grit and fine is 100 grit.
What thread and speed does this cup wheel use?
A 5/8-11 thread on a steel body, rated to a maximum of 8,000 RPM.
Can this cup wheel be run dry?
No. Diamax specifies wet use only for the Cyclone Turbo cup wheels.
Which materials is it for?
Diamax lists the Cyclone Turbo cup wheels for engineered stone and granite. For Dekton, porcelain and other ultra-compact surfaces, the Diamax Cyclone Ultra Cup Wheel is the tool built for that job.
Which wheel should I use before this one?
The medium 50 grit or the coarse 30 grit wheel of the same 4 in. line, depending on how much material has to come off before the fine pass.