Bonstone Materials Clear Gel Epoxy – 3 Quart Kit, 2 Quarts Part A + 1 Quart Part B
Bonstone Materials Clear Gel Epoxy – 3 Quart Kit, 2 Quarts Part A + 1 Quart Part B
The Bonstone Materials Clear Gel Epoxy 3 Quart Kit is a transparent knife-grade epoxy adhesive supplied as two 1-quart cans of Part A and one 1-quart can of Part B, mixed two parts A to one part B by volume.
Key Features
- Mix ratio is 2:1 by volume, per the manufacturer technical data sheet.
- Three one-quart cans in the kit: two Part A, one Part B.
- Initial set is 2 hours at 75F; full cure within 24 hours at 75F.
- Knife-grade consistency for hand application to seams, chips and hollows.
- Same formulation as the three-gallon kit - a smaller pack, not a different product.
Who Is This For?
Shops and installers who use clear knife-grade epoxy steadily but not by the gallon: seam repairs, chip fills, bullnose lamination and service calls where a quart of catalyzed material is already more than a day's work.
What This Is Not For
Rodding and flowing pours need a thin grade that runs into the channel, which a gel will not do; the Bonstone Materials Touchstone Express II Flowing is built for that. If the volume is genuinely production-scale, the Bonstone Materials Clear Gel Epoxy 3 Gallon Kit is the same adhesive at a lower cost per quart.
Frequently Asked Questions
What is in the three-quart kit?
A Bonstone Clear Gel Epoxy three-quart kit is two 1-quart cans of Part A and one 1-quart can of Part B, which is the published 2:1 mix ratio.
Is the quart kit a different formula from the gallon kit?
No. Bonstone Clear Gel Epoxy is one formulation sold in several pack sizes; the quart and gallon kits share the same 2:1 ratio and the same cure schedule.
How fast does it set?
Bonstone Clear Gel Epoxy reaches initial set at 2 hours at 75F and full cure within 24 hours at 75F.
Will it sag on a vertical joint?
Bonstone Clear Gel Epoxy is a knife-grade gel, which is the grade chosen when the adhesive has to stay in a vertical or overhead joint rather than run.