Omni Cubed Mega-Jaw Carry Clamp – 6-61 mm Jaw Opening, 500 lb per Pair
Omni Cubed Mega-Jaw Carry Clamp – 6-61 mm Jaw Opening, 500 lb per Pair
Omni Cubed Mega-Jaw Carry Clamps are hand carry clamps sold as a pair, with a 6-61 mm (0.24-2.4 in.) jaw opening and a published capacity of 500 lb per pair. Aluminum arms carry non-marking rubber grips, and the gravity-assist action tightens the grip as the load hangs on it.
The pair is the selling unit and the rated figure is stated for the pair, not per clamp. Availability of this product is limited by the manufacturer to the USA, Canada and Europe.
Key Features
- 6-61 mm (0.24-2.4 in.) jaw opening - takes thin material up to thick built-up and cast tops
- 500 lb capacity per pair, as published by Omni Cubed
- Gravity-assist mechanism: the grip tightens as load increases
- Aluminum arms with non-marking rubber grips
- Grab-and-go: nothing to pump, charge or seal
What's Included
- Pair of Mega-Jaw carry clamps (2 clamps)
Who Is This For?
Two-person crews carrying slabs and finished tops in and out of a shop, a truck or a job site, where a vacuum cup will not seal on a textured or dusty face. The jaw range also suits thick cast and built-up material that a thin-grip sheet clamp cannot take.
Frequently Asked Questions
What is the capacity of the Mega-Jaw Carry Clamp?
Omni Cubed publishes 500 lb per pair. The clamps are sold and rated as a pair, so that figure applies to the two clamps used together.
What thickness of material do they grip?
The jaw opening is 6-61 mm (0.24-2.4 in.).
Will they mark a polished face?
The aluminum arms carry non-marking rubber grips, which is what keeps the clamp off the finished surface.
Do these come with a case?
This part number is the bare pair. Some distributors list a separate set-with-case configuration; the case is not included here.
What should I use for carrying thin sheet material?
For thin sheet goods a purpose-made sheet clamp is the better grip - the Aardwolf Sheet Material Carry Clamp covers a 0 to 2 in. grip range and publishes a 441 lb working load limit.
Are they for moving material across a site?
Carry clamps are for lifting and carrying by hand. For moving a heavy top any distance over rough ground or up stairs, a slab cart such as the Omni Cubed Pro-Cart with 1,000 lb capacity does the work instead.