BRUIN Bridge Saw Blade – 14 in. Diameter, 25 mm Segment
BRUIN Bridge Saw Blade – 14 in. Diameter, 25 mm Segment
The BRUIN Bridge Saw Blade is a 14 in. bridge saw blade with 25 mm segments for wet cutting engineered stone and natural stone slabs.
It is rated at 2,000 maximum RPM with 1,780 RPM suggested, and it is a wet-cut blade only – it is not made to run dry. Published feed rates are up to 300 in./min in engineered stone and up to 200 in./min in natural stone, and the blade was tested over more than 300 quartz slabs. Arbor size is not published for this blade, so confirm the bore against your saw before ordering.
Key Features
- 25 mm segment, published as an explicit spec on the manufacturer page rather than decoded from the part number
- 2,000 max RPM; 1,780 RPM suggested for normal cutting
- Wet use only – water must be running through the cut
- Feed rate up to 300 in./min in engineered stone, up to 200 in./min in natural stone
- Tested over 300 quartz slabs at 14 in.
- Arbor / bore size is not published; the 60/50 mm bridge saw norm has not been assumed here
What's Included
- 1 x 14 in. bridge saw blade
Who Is This For?
Fabrication shops cutting quartz and granite slabs on a bridge saw who want one general-purpose wet blade rather than a material-specific one. It is the wrong blade for sintered and ultra-compact slabs – the published material list covers engineered and natural stone only, and a general stone bond loses its edge fast in Dekton-class material; use the Italdiamant EvoGres Plus Bridge Saw Blade – 14 in. for Dekton and porcelain, and the Alpha Silencer III Bridge Saw Blade – 14 in. for quartzite and Class 5 granite.
Frequently Asked Questions
Can this blade be run dry?
No. The 14 in. bridge saw blade in the BRUIN line is specified for wet use only and needs water through the cut.
What is the maximum RPM?
2,000 RPM is the published maximum for the 14 in. BRUIN bridge saw blade, with 1,780 RPM suggested for normal cutting.
What does the 25 mm refer to?
The 25 mm is the segment size published on the manufacturer's own page for this blade. The page states it as "segment size" and does not say whether that figure is segment height or segment length.
What feed rate should I run?
The published feed rates for this blade are up to 300 in./min in engineered stone and up to 200 in./min in natural stone.
Does it come in other diameters?
Yes. The same BRUIN bridge saw blade is listed at 16 in. and 18 in., all with a 25 mm segment.