Diamax Cyclone MVP Pneumatic Air Polisher – Rear Exhaust, 5/8-11 Spindle, 5,500 RPM
Diamax Cyclone MVP Pneumatic Air Polisher – Rear Exhaust, 5/8-11 Spindle, 5,500 RPM
The Diamax Cyclone MVP Pneumatic Air Polisher is a pneumatic air polisher with a rear exhaust for wet polishing with an air tool that vents to the rear.
Exhaust direction is the published difference between the two Diamax air polishers: this one vents to the rear, the Hurricane vents out of the side of the body. Pick the one that suits how you hold the tool at the bench.
Key Features
- 5/8 in.-11 spindle
- 5,500 RPM
- Rear exhaust
Not Recommended For
An air polisher needs a compressor that can hold its air consumption continuously; a small portable unit will not keep up. If you want the exhaust at the side instead, that is the Diamax Hurricane Pneumatic Air Polisher – Side Exhaust, 5/8-11 Spindle, 4,500 RPM.
Who Is This For?
Fabricators polishing wet who want the exhaust behind the tool rather than at the side.
Frequently Asked Questions
What speed does it run at?
The title figure of 5,500 RPM is the maximum spindle speed.
What spindle does it have?
It has a 5/8 in.-11 spindle.
What is the difference between rear and side exhaust?
Where the spent air leaves the tool. Diamax publishes the direction and nothing else about it, so choose by how you hold the tool rather than by a claimed benefit.
What air supply does it need?
No manufacturer or distributor table we could find publishes an air consumption figure for this tool. Size the compressor to hold the tool continuously rather than in bursts.