Diamax Cyclone Turbo Cup Wheel – 4 in., Coarse 30 Grit, Steel Body
Diamax Cyclone Turbo Cup Wheel – 4 in., Coarse 30 Grit, Steel Body
The Diamax Cyclone Turbo Cup Wheel is a 4 in. turbo cup wheel, Coarse 30, for fast stock removal and edge shaping on stone.
A steel body and a turbo segment: it takes material off quickly and leaves a scratch pattern for the resin wheels to clean up.
Key Features
- Coarse 30 turbo segment, steel body, 5/8 in.-11 thread
- Maximum 8,000 RPM
- 4 in. diameter
Not Recommended For
Not a finishing wheel — a coarse turbo segment leaves a scratch pattern that has to be polished out. Step up through the Diamax Cyclone Turbo Cup Wheel – 4 in., Medium, 50 Grit and the Diamax Cyclone Turbo Cup Wheel – 4 in., Fine, 100 Grit in the same line, or use a resin cup wheel such as the Diamax Cyclone Hex Flat Resin Cup Wheel – 4 in., Medium 50 Grit for a flatter finish.
Who Is This For?
Fabricators knocking down saw marks and shaping edges before the resin wheels come out.
Frequently Asked Questions
What grit is this wheel?
It is the Coarse 30 — the coarse end of the range.
What is the maximum RPM?
It is rated to a maximum of 8,000 RPM.
What body is it built on?
A steel body, threaded 5/8 in.-11 thread.
What are the finer grades?
Diamax publishes the same wheel as a Medium 50 and a Fine 100 — the Diamax Cyclone Turbo Cup Wheel – 4 in., Medium, 50 Grit and the Diamax Cyclone Turbo Cup Wheel – 4 in., Fine, 100 Grit.