The ALPHA PSC-600 Pneumatic Stone Cutter. Model PSC-600. Air Pressure 85 PSI (6 Bar). Air Consumption 15 CFM (425L/min). Weight 2.9 lbs (1.3 kgs). No Load Speed 8,500 RPM. Air Inlet 1/4” BSPP. Water Inlet 1/8” BSPP. Arbor 7/8” (22mm). Max. Cutting Disc Diameter 6" (150mm). Length 7-1/2” (190.5mm). There is no doubt that the electric angle grinder is the most popular portable power tool in stone fabrication. It is normal to see such grinders being used in almost all stone fabrication shops, whether creating dust or blowing dust into a vacuum system. Introducing the Alpha® PSC-600 which is a newly developed high-performance wet pneumatic stone cutter that will set a new “normal” in stone fabrication shops. It is common knowledge that electric power tools don’t last very long due to the stone dust or the water splash which damages them easily. This is why most of the polishers nowadays are pneumatic-driven polishers. The PSC-600 comes with a very unique center water-feed system to deliver ample water on the both sides of the diamond blade, which will keep the dust down on the floor and also enhance the performance and life of the diamond blade. In addition, we made the end case with a composite material to prevent freezing which is a common issue for hands, by the rear exhaust system, in consideration of operator comfort. The Alpha® PSC-600 is smaller and lighter than electric angle grinders and offers better maneuverability along with all the safety features. This turn-key operation stone cutter comes with 15 ft. all–weather hoses and a convenient water quick coupler with shut off valve.
