{"title":"Material Handling","description":null,"products":[{"product_id":"pro-cart-at2","title":"Omni Cubed Pro-Cart – 60 in. L x 22 in. W x 24 in. H, 1,000 lb Capacity","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Pro-Cart AT2 is a 60 in. L x 22 in. W x 24 in. H all-terrain slab cart rated at 1,000 lb, with an adjustable wheelbase that can be set to a stair tread depth so the cart clears and rests on the treads. It runs 10 in. non-marking flat-free tires, has 17.5 in. of ground clearance and weighs 64 lb.\u003c\/p\u003e\n    \u003cp\u003eAgainst the base model, the differences are the higher rating, the larger tires, the stair-tread wheelbase and a built-in folding kit for storage. It ships in two boxes.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e1,000 lb capacity, 64 lb cart\u003c\/li\u003e\n\u003cli\u003eAdjustable wheelbase set to stair tread depth\u003c\/li\u003e\n\u003cli\u003e10 in. non-marking, flat-free tires\u003c\/li\u003e\n\u003cli\u003e17.5 in. ground clearance\u003c\/li\u003e\n\u003cli\u003eIntegrated clamps with a 73 mm (2.88 in.) maximum opening on a 60 in. support rail\u003c\/li\u003e\n\u003cli\u003eFolding kit built in for storage\u003c\/li\u003e\n\u003cli\u003e60 in. L x 22 in. W x 24 in. H\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\u003cli\u003eOne Pro-Cart AT2, shipped in two boxes\u003c\/li\u003e\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eInstall crews that meet stairs, steep drives and rough ground on the same day, and shops moving loads above the 750 lb rating of the base cart. If every delivery is flat ground under 750 lb, the lighter base model costs less and stores smaller.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the capacity of the Pro-Cart AT2?\u003c\/h4\u003e\n\u003cp\u003eThe Omni Cubed Pro-Cart AT2 is rated at 1,000 lb and weighs 64 lb.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow does it handle stairs?\u003c\/h4\u003e\n\u003cp\u003eIts wheelbase is adjustable so it can be matched to the tread depth of the staircase, letting the cart clear and rest on the treads rather than tipping between them.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the difference between the AT2 and the AT1?\u003c\/h4\u003e\n\u003cp\u003eThe AT2 is rated at 1,000 lb with 10 in. tires, 17.5 in. of ground clearance, an adjustable wheelbase for stairs and a built-in folding kit; the Omni Cubed Pro-Cart with 750 lb capacity is the lighter base model with 8 in. tires and 14.5 in. of clearance.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow thick a piece will the clamps hold?\u003c\/h4\u003e\n\u003cp\u003eThe integrated clamps open to a maximum of 73 mm (2.88 in.), on a 60 in. support rail.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes it come assembled in one box?\u003c\/h4\u003e\n\u003cp\u003eIt ships in two boxes.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170107683036,"sku":"OCI PCAT2-14","price":1450.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/b067b8f5-0122-46c5-81c5-2e8c39f8a2a1.jpg?v=1786055248"},{"product_id":"aardwolf-electric-joint-setter","title":"Aardwolf Seam Setter – 9 in. x 7-1\/2 in. Vacuum Pads, Electric-powered Vacuum Pump","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Seam Setter EOSS is an electric vacuum seam setter supplied as a set of two units with an electric-powered vacuum pump, running 9 in. x 7-1\/2 in. vacuum pads.\u003c\/p\u003e\n\u003cp\u003eAardwolf's own name for it is the Electric Joint Setter. Two units and a pump is the important commercial fact: a seam needs a setter on each side of the joint, and this SKU supplies both plus the vacuum source, rather than a single tool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of two joint setters plus an electric-powered vacuum pump\u003c\/li\u003e\n\u003cli\u003e9 in. x 7-1\/2 in. vacuum pads\u003c\/li\u003e\n\u003cli\u003eRoller nut mechanism for controlled seam adjustment - the joint is drawn together progressively rather than snatched\u003c\/li\u003e\n\u003cli\u003eFour leveling knobs for height alignment across the seam\u003c\/li\u003e\n\u003cli\u003eElectric pump does the vacuum work, so pads are pulled down without hand pumping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo joint setters\u003c\/li\u003e\n\u003cli\u003eOne electric-powered vacuum pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eFabrication shops and installation crews closing countertop seams every day, where the time spent hand-pumping a manual setter across a full kitchen is worth removing.\u003c\/p\u003e\n\u003cp\u003eIt needs a power supply. On a site with no electricity, or for a quick single-seam call-out, the manual Aardwolf Seam Setter with the dual-action ratcheting handle is the tool that works, and Aardwolf describes that model as the compact one for fragile or lightweight slabs. The 9 in. x 7-1\/2 in. pads also need that much clean, flat, non-porous surface to seal against, so very narrow returns and heavily textured finishes are a poor fit. This is a seam tool only - it does not lift or transport slabs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow many setters come with the Aardwolf Seam Setter EOSS?\u003c\/h4\u003e\n\u003cp\u003eThe EOSS ships as a set: two joint setters plus an electric-powered vacuum pump.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat size are the vacuum pads?\u003c\/h4\u003e\n\u003cp\u003eThe vacuum pads measure 9 in. x 7-1\/2 in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the roller nut mechanism for?\u003c\/h4\u003e\n\u003cp\u003eIt gives controlled adjustment of the seam, so the two pieces are drawn together progressively instead of being pulled in one movement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow is the seam leveled?\u003c\/h4\u003e\n\u003cp\u003eFour leveling knobs adjust pad height across the joint so the two surfaces can be brought flush before the adhesive cures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes it need mains power?\u003c\/h4\u003e\n\u003cp\u003eYes. The vacuum pump is electric-powered, so a supply is needed on site. A manual ratchet seam setter is the alternative where there is none.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170107715804,"sku":"AAW EOSS","price":1641.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/057aec51-4ce3-4fdb-b0aa-6dfcb4d47981.webp?v=1786562302"},{"product_id":"sink-hole-saver-manual-v6","title":"Omni Cubed Sink Hole Saver V6 – Telescoping, 51 in. Collapsed to 90 in. Extended, Manual","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Sink Hole Saver v6 Slider in Manual is a telescoping vacuum reinforcement rail collapsing to 51 in. and extending to 90 in., with four 6 in. sliding vacuum cups rated at 72 lb per cup, charged by hand. It weighs 13.2 lb.\u003c\/p\u003e\n    \u003cp\u003eManual means there is no pump and nothing to charge: each cup is charged by hand. The telescoping rail and sliding cups are what distinguish the Slider from the fixed-length 4 ft. and 7 ft. rails in the same line.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eTelescoping rail: 51 in. collapsed, 90 in. extended\u003c\/li\u003e\n\u003cli\u003eFour 6 in. sliding vacuum cups, repositionable around a cutout\u003c\/li\u003e\n\u003cli\u003e72 lb capacity per cup, as published for this model\u003c\/li\u003e\n\u003cli\u003eManual: hand-charged cups, no pump, no battery, no charger\u003c\/li\u003e\n\u003cli\u003e13.2 lb complete\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eOne telescoping rail\u003c\/li\u003e\n\u003cli\u003eFour 6 in. sliding vacuum cups\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eInstallers who want a vacuum reinforcement rail that packs short and has nothing to keep charged, and shops adding a second rail alongside a pump-equipped one. Crews doing long days of repeated lifts usually prefer the Auto version, which holds vacuum without hand pumping.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow long is the Slider rail?\u003c\/h4\u003e\n\u003cp\u003eThe Omni Cubed Sink Hole Saver v6 Slider telescopes from 51 in. collapsed to 90 in. extended - it is not a fixed-length rail.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the per-cup capacity of the Manual Slider?\u003c\/h4\u003e\n\u003cp\u003e72 lb per cup, across four 6 in. sliding cups.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes the Manual version need charging?\u003c\/h4\u003e\n\u003cp\u003eNo. The cups on the manual Slider are charged by hand, so there is no pump, battery or charger to look after.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow is it different from the Auto version?\u003c\/h4\u003e\n\u003cp\u003eThe Omni Cubed Sink Hole Saver V6 telescoping Slider in Auto uses the same telescoping rail but adds a rail-mounted rechargeable pump that maintains the vacuum, and weighs more as a result.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow does the Slider differ from the fixed rails?\u003c\/h4\u003e\n\u003cp\u003eThe Slider's rail telescopes and its cups slide along it, so one rail covers a range of piece sizes and cutout positions; the fixed models are a rigid single length.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170108272860,"sku":"OCI SHS-SM-20","price":750.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/68ba1d32-6841-425a-ae23-ba78101c6e70.jpg?v=1786055254"},{"product_id":"aardwolf-lifter-twister-mss03","title":"Aardwolf Lifter Twister – Motorized Swivel Shackle, 2,646 lb Working Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Lifter Twister MSS03 is a remote-controlled motorized swivel shackle rated to a 2,646 lb working load limit, hung between a crane hook and a lifting clamp to rotate a suspended load 360 degrees in either direction.\u003c\/p\u003e\n\u003cp\u003eIt does not lift. It rotates: the clamp below it holds the slab, the crane or forklift above it takes the weight, and this unit turns the load in the air so one person can line a slab up without anyone standing underneath it to push.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2,646 lb working load limit (1,200 kg) - this rating caps the whole assembly hung below it\u003c\/li\u003e\n\u003cli\u003e360 degree bi-directional rotation under remote control\u003c\/li\u003e\n\u003cli\u003e24V DC motor with a clip-in battery, up to 12 hours of operating time\u003c\/li\u003e\n\u003cli\u003eRemote control range up to 148 ft, so the operator can work from the forklift cab or the crane controls\u003c\/li\u003e\n\u003cli\u003eUnit weight 54.0 lb\u003c\/li\u003e\n\u003cli\u003eWorks between the hook and an Aardwolf lifting clamp, on forklifts and truck-mounted cranes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne motorized swivel shackle\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eStone yards, container unloading crews and installation teams turning slabs in the air single-handed, where the alternative is a second person guiding the load by hand.\u003c\/p\u003e\n\u003cp\u003eIt is an attachment, not a lifting system: you still need a crane or a boom-equipped forklift above it and a rated clamp below it, such as the Aardwolf Lifter 50 Auto at 2,646 lb. The rating is the trap worth naming - at 2,646 lb this unit is the weakest link in any assembly hung beneath it, so it must not be used under the Aardwolf Horizontal Stone Lifting Clamp AHLC-2010-4T, which is rated 8,818 lb and whose loads would be far beyond it. It also needs charging, so it is not a tool to specify where nothing on the site has power.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit of the Aardwolf Lifter Twister MSS03?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes a 2,646 lb (1,200 kg) working load limit for the MSS03 motorized swivel shackle. That figure caps the total load hung below it, including the clamp.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes it lift the slab?\u003c\/h4\u003e\n\u003cp\u003eNo. It is a rotation device that hangs between a lifting hook and a lifting clamp; the crane or forklift lifts and the clamp grips.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow far does it rotate?\u003c\/h4\u003e\n\u003cp\u003e360 degrees, in both directions, under remote control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow long does a charge last?\u003c\/h4\u003e\n\u003cp\u003eThe 24V DC clip-in battery gives up to 12 hours of operating time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow far away can the remote work?\u003c\/h4\u003e\n\u003cp\u003eThe remote control has a range of up to 148 ft, which allows operation from a forklift cab or a crane control position.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170110468316,"sku":"AAW MSS03","price":4737.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/e8fc5737-df9e-4ce9-9c12-d3e4e390cba9.png?v=1786055260"},{"product_id":"vacuum-cup-10-inch-low-marking-n6450lm","title":"Wood's Powr-Grip Vacuum Cup – 10 in. Concave, N6450LM, Low-Marking Pad, 175 lb Capacity","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eThe Wood's Powr-Grip Vacuum Cup (Model N6450LM, Stock #91804) is a 10 in. metal-handle hand cup with a low-marking concave pad, rated to lift 175 lb [79 kg] on curved or irregular nonporous surfaces.\u003c\/p\u003e\n  \u003ch3\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eLow-marking rubber compound that will not mark or stain most surfaces\u003c\/li\u003e\n    \u003cli\u003e175 lb [79 kg] rated load capacity\u003c\/li\u003e\n    \u003cli\u003eMetal handle\u003c\/li\u003e\n    \u003cli\u003eConcave pad built for curved or irregular nonporous surfaces (Wood's Powr-Grip's own Ideal Uses)\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eWhat's Different From the Standard N6450\u003c\/h3\u003e\n  \u003cp\u003eSame 175 lb rating, metal handle, and concave curved-surface pad as the standard N6450 (Wood's Powr-Grip Vacuum Cup – 10 in. Concave, N6450, 175 lb Capacity), but with a low-marking pad compound instead of the standard pad.\u003c\/p\u003e\n  \u003ch3\u003eNot for Flat Surfaces\u003c\/h3\u003e\n  \u003cp\u003eThis is a concave pad built for curved or irregular surfaces, not flat ones. For a flat, low-marking metal hand cup, Wood's Powr-Grip's equivalent is the 8 in. N4950LM (Wood's Powr-Grip Vacuum Cup – 8 in. Flat, N4950LM, Low-Marking Pad, 125 lb Capacity).\u003c\/p\u003e\n  \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat is the load capacity?\u003c\/h4\u003e\n    \u003cp\u003e175 lb [79 kg].\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat makes the pad \"low-marking\"?\u003c\/h4\u003e\n    \u003cp\u003eWood's Powr-Grip's low-marking rubber compound will not mark or stain most surfaces.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat surfaces is it rated for?\u003c\/h4\u003e\n    \u003cp\u003eCurved or irregular nonporous surfaces — not flat surfaces.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Woods Powr Grip","offers":[{"title":"Default Title","offer_id":52170111221980,"sku":"WOO 91804","price":169.0,"currency_code":"USD","in_stock":true}]},{"product_id":"suction-cup-small","title":"A. Bottini Small Suction Cup – 3 in., 25 lb. Capacity","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe A. Bottini Small Suction Cup is a 3 in. hand suction cup used to lift and position tile and cut pieces, with an approximate lifting capacity of 25 lb. (11 kg) per BOE.\u003c\/p\u003e\n    \u003cp\u003eA rated capacity is an approximate figure on a clean, flat, non-porous surface. It is not a slab-handling lifter and it is not rated for overhead or two-man slab work — for that, use a purpose-built vacuum lifter. The other size stocked is the 5 in. A. Bottini Plastic Suction Cup, rated at 40 lb. (18 kg).\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e3 in. cup\u003c\/li\u003e\n      \u003cli\u003eBOE: approximately 25 lb. (11 kg) lifting capacity\u003c\/li\u003e\n      \u003cli\u003eHand suction cup\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eTile and stone installers lifting and positioning tile, setting a cut piece, and pulling an access panel or a lid — small handling, not slab handling.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch4\u003eHow much will it lift?\u003c\/h4\u003e\n      \u003cp\u003eBOE publishes an approximate lifting capacity of 25 lb. (11 kg).\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch4\u003eWhat size is the cup?\u003c\/h4\u003e\n      \u003cp\u003eThe suction cup is 3 in.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch4\u003eCan I lift a slab with it?\u003c\/h4\u003e\n      \u003cp\u003eNo. This is a hand cup for small handling. Slab work needs a purpose-built vacuum lifter with a rated, tested seal.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch4\u003eWhat affects the grip?\u003c\/h4\u003e\n      \u003cp\u003eA suction cup holds on a clean, flat, non-porous surface. Dust, texture, porosity and moisture all reduce the seal, which is why the published capacity is an approximation.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"A. Bottini (Primo Tools)","offers":[{"title":"Default Title","offer_id":52170111713500,"sku":"ABO SUC","price":4.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/6c7e6af8-3999-452a-abb1-9f963bb8f363.jpg?v=1786055269"},{"product_id":"air-filter-for-vacuum-pad","title":"Wood's Powr-Grip Vacuum Pad Felt Filter – Fits Metal, Plastic \u0026 Vertical Hand Cups","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eThe Wood's Powr-Grip Felt Filter for Vacuum Pad (Stock\/Model #60024) is a single replacement felt filter that fits Wood's Powr-Grip metal, plastic, and vertical hand cups.\u003c\/p\u003e\n  \u003ch3\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eFelt filter element for the hand cup's vacuum pad\u003c\/li\u003e\n    \u003cli\u003eFits Wood's Powr-Grip metal hand cups (N4950, N4950LM, N6450, N6450LM) and Wood's Powr-Grip plastic and vertical hand cups\u003c\/li\u003e\n    \u003cli\u003eComponent of Wood's Powr-Grip's Metal Hand Cup Maintenance Kit (Stock #90504) and Plastic \u0026amp; Vertical Hand Cup Maintenance Kit (Stock #90160)\u003c\/li\u003e\n    \u003cli\u003eSold individually — this is the single filter, Stock #60024\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eWho Is This For\u003c\/h3\u003e\n  \u003cp\u003eFabricators and installers maintaining Wood's Powr-Grip hand cups who need to replace the felt filter as routine maintenance.\u003c\/p\u003e\n  \u003ch3\u003eNot a Multi-Pack\u003c\/h3\u003e\n  \u003cp\u003eThis listing is the single-unit filter. Wood's Powr-Grip's 10-pack of the same felt filter is sold under a separate stock number (#90501) and is not this SKU.\u003c\/p\u003e\n  \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat does this filter fit?\u003c\/h4\u003e\n    \u003cp\u003eWood's Powr-Grip metal hand cups (N4950, N4950LM, N6450, N6450LM) and Wood's Powr-Grip plastic and vertical hand cups.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eIs it sold as a single filter or a multi-pack?\u003c\/h4\u003e\n    \u003cp\u003eA single filter. Wood's Powr-Grip's 10-pack carries a different stock number (#90501).\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eIs this the same part used in Wood's Powr-Grip's maintenance kits?\u003c\/h4\u003e\n    \u003cp\u003eYes — it's the felt filter included in both the Metal Hand Cup Maintenance Kit (#90504) and the Plastic \u0026amp; Vertical Hand Cup Maintenance Kit (#90160).\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Woods Powr Grip","offers":[{"title":"Default Title","offer_id":52170113384668,"sku":"WOO 60024","price":0.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/e54a1027-22a4-4af6-8cb5-6238ccb2570e.jpg?v=1786055277"},{"product_id":"aardwolf-swivel-hook-1-5t-alloy-steel","title":"Aardwolf Swivel Hook – 1.5 Ton Working Load Limit, Alloy Steel","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Swivel Hook SH1.5T is an alloy steel lifting hook with a 1.5 ton working load limit - 3,307 lb - supplied with a 36 in. safety chain, used to turn a forklift tine or a crane fitting into a lifting point.\u003c\/p\u003e\n\u003cp\u003eRead the rating carefully. The SKU is written SH15T without the decimal point, but the hook is the 1.5 ton model, not a 15 ton one. Aardwolf's line runs SH1.5T, SH3T and SH7T, and the number is the working load limit in tonnes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1.5 ton working load limit - 3,307 lb\u003c\/li\u003e\n\u003cli\u003eAlloy steel construction\u003c\/li\u003e\n\u003cli\u003e36 in. safety chain supplied (915 mm)\u003c\/li\u003e\n\u003cli\u003eNet weight 1.36 lb, gross 1.4 lb - it lives in a toolbox, not on a rack\u003c\/li\u003e\n\u003cli\u003eOne of the SH1.5T \/ SH3T \/ SH7T family, where the model number is the tonnage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne swivel hook with safety chain\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eYards and shops that need a rated lifting point on a forklift tine or a crane fitting for slab lifters and clamps, without adding a permanent attachment.\u003c\/p\u003e\n\u003cp\u003eThe rating is the constraint and it is easy to get wrong on this part. At 3,307 lb it is adequate for tools in the same class - the Aardwolf Lifter 50 at 2,646 lb, or the Aardwolf Lifter Twister at 2,646 lb - but it must not be used with the Aardwolf Horizontal Stone Lifting Clamp AHLC-2010-4T, which is rated 8,818 lb: no fitting in a lifting assembly may be rated below the load it carries. If your load is heavier, use a swivel hook rated at or above the load - Aardwolf's line continues above 1.5 ton - and confirm availability before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit of the Aardwolf Swivel Hook SH1.5T?\u003c\/h4\u003e\n\u003cp\u003e1.5 tons, which Aardwolf publishes as 3,307 lb.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs SH15T a 15 ton hook?\u003c\/h4\u003e\n\u003cp\u003eNo. SH15T is this store's rendering of Aardwolf's SH1.5T, a 1.5 ton hook rated 3,307 lb. The missing decimal point makes it look like a much larger rating than it has.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the hook made of?\u003c\/h4\u003e\n\u003cp\u003eAlloy steel. Aardwolf's Indian site and the Aardwolf-branded marketplace listing both describe the 1.5T hook as alloy steel, while aardwolfusa.com words it as construction-grade steel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs a safety chain included?\u003c\/h4\u003e\n\u003cp\u003eYes. A 36 in. (915 mm) safety chain is supplied with the hook.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is it used for?\u003c\/h4\u003e\n\u003cp\u003eIt converts a forklift tine or a crane fitting into a rated lifting point so slab lifters and clamps can be hung from it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170114105564,"sku":"AAW SH15T","price":44.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/cfb473bb-0bd1-468d-a26b-37194d13c3c9.jpg?v=1786055283"},{"product_id":"waterfall-jack-edge-lifting-tool","title":"Omni Cubed Waterfall Jack – 0.55-1.97 in. Clamping Range, 300 lb per Pair","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Waterfall Jack is a waterfall edge clamp sold as a pair, with a 0.55-1.97 in. (14-50 mm) clamping range and a published capacity of 300 lb per pair. It does not lift: it clamps to both sides of a waterfall edge and its adjustment knobs hold the panel at the height and angle set while the epoxy cures, which is what replaces a stack of shims.\u003c\/p\u003e\n    \u003cp\u003eA rotating clamp foot lets it sit on thicker edges and returns, and rubber bumpers keep the clamp bodies off the finished face. All components pack into a case at 7.7 lb.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eSold as a pair - two units, one for each side of the waterfall joint\u003c\/li\u003e\n\u003cli\u003eClamps both faces of the edge and holds height and angle while adhesive cures\u003c\/li\u003e\n\u003cli\u003e0.55-1.97 in. (14-50 mm) clamping range\u003c\/li\u003e\n\u003cli\u003e300 lb per pair, as published by Omni Cubed\u003c\/li\u003e\n\u003cli\u003eRotating clamp foot for thicker edges and returns\u003c\/li\u003e\n\u003cli\u003eRubber bumpers protect the finished edge\u003c\/li\u003e\n\u003cli\u003e7.7 lb for all components in the case\u003c\/li\u003e\n\u003cli\u003eIncludes a 60 yd roll of Kung Fu Tape to pull the joint tight\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eTwo Waterfall Jack units in a case\u003c\/li\u003e\n\u003cli\u003eOne 60 yd roll of Kung Fu Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eFabricators and installers setting waterfall panels and mitered returns, who need the joint held dead-on while the epoxy goes off instead of chasing it with shims. It is not a lifting device and should not be used to raise or support a load off the ground.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes the Waterfall Jack lift the panel?\u003c\/h4\u003e\n\u003cp\u003eNo. The Omni Cubed Waterfall Jack is a clamp: it grips both sides of a waterfall edge and its adjustment knobs hold the panel at a set height and angle while the epoxy cures. It is not a lifting device.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow many units are in the pack?\u003c\/h4\u003e\n\u003cp\u003eTwo units, supplied in a case with a 60 yd roll of Kung Fu Tape.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the clamping range?\u003c\/h4\u003e\n\u003cp\u003e0.55 in. to 1.97 in. (14-50 mm).\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the rated capacity?\u003c\/h4\u003e\n\u003cp\u003eOmni Cubed publishes 300 lb per pair. That figure applies to the two units used together as supplied.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDo I still need tape?\u003c\/h4\u003e\n\u003cp\u003eThe clamps hold height and angle while tape pulls the joint closed, so both are used on the same edge - which is why a 60 yd roll of Kung Fu Tape is supplied with the pair.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat should I use for a flat in-line seam instead?\u003c\/h4\u003e\n\u003cp\u003eA vacuum seam setter is the tool for joining and leveling two flat sections - for example the Omni Cubed Stealth Seamer Seam Setter with 8 in. cups in Manual.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170114236636,"sku":"OCI WJ-109-23","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/284d3be7-2f08-4c99-b8fd-c779dcdc2b7b.jpg?v=1786055284"},{"product_id":"aardwolf-versa-block-clamp-4-23-grip-range","title":"Aardwolf Versa Block Clamp – 4 in. to 23-5\/8 in. Grip Range, 2,646 lb Working Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Versa Block Clamp AVBC-600 is a gravity-locking block clamp with reversible jaws, gripping from 4 in. to 23-5\/8 in. with a 2,646 lb working load limit.\u003c\/p\u003e\n\u003cp\u003eReversible jaws are what the Versa in the name refers to: turned one way the clamp grips a block from the outside, turned the other it grips from the inside of an opening, so one clamp covers loads that would otherwise need two tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrip range 4 in. to 23-5\/8 in. (100-600 mm) - the 600 in the model code is the maximum grip in millimetres\u003c\/li\u003e\n\u003cli\u003e2,646 lb working load limit (1,200 kg)\u003c\/li\u003e\n\u003cli\u003eReversible jaws for both external and internal gripping\u003c\/li\u003e\n\u003cli\u003eGravity-controlled auto-lock, so the load's weight sets the grip\u003c\/li\u003e\n\u003cli\u003ePart of the AVBC-600 \/ AVBC-600H \/ AVBC-1100 family\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne block clamp\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eHardscape and masonry yards, precast plants and monument shops lifting blocks, kerbs and cut sections with a crane or a boom-equipped forklift, especially where some loads are hollow and have to be picked from the inside.\u003c\/p\u003e\n\u003cp\u003eThe 4 in. minimum is the deciding number. The jaws will not close on slab-thickness material at all, so 2 cm and 3 cm stone needs the Aardwolf Lifter 50, which grips 3\/8 in. to 2 in. For loads wider than 23-5\/8 in., step across to a horizontal clamp - the Aardwolf Horizontal Stone Lifting Clamp AHLC-2010-4T grips 12 in. to 79 in. at 8,818 lb. Match the rigging to the clamp as well: the 1.5 ton Aardwolf Swivel Hook is rated 3,307 lb and is adequate for this clamp's 2,646 lb limit, but it is not adequate for the larger horizontal clamps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the grip range of the Aardwolf Versa Block Clamp AVBC-600?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes 100-600 mm, which is 4 in. to 23-5\/8 in. Older listings quoting 4 in. to 23 in. understate it and listings quoting 4 in. to 24 in. overstate it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit?\u003c\/h4\u003e\n\u003cp\u003eThe AVBC-600 block clamp has a manufacturer-published working load limit of 1,200 kg, which is 2,646 lb.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat does reversible jaws mean?\u003c\/h4\u003e\n\u003cp\u003eThe jaws can be turned to grip a load from the outside or from the inside of an opening, so the same clamp handles solid blocks and hollow sections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow does the clamp lock?\u003c\/h4\u003e\n\u003cp\u003eThe action is gravity-controlled: the weight of the load closes the jaws as the clamp is lifted, and they release when the load is set down.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan it lift a stone slab?\u003c\/h4\u003e\n\u003cp\u003eNo. With a 4 in. minimum grip the jaws cannot close on slab-thickness material; that needs a slab lifter with a grip range measured in tens of millimetres.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170115416284,"sku":"AAW AVBC-600","price":1543.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/e1259408-e1fc-45fb-905c-5e16a9b55609.jpg?v=1786055290"},{"product_id":"aardwolf-horizontal-stone-lifting-clamp-ahlc-2010-4t","title":"Aardwolf Horizontal Stone Lifting Clamp – 12 in. to 79 in. Grip, 8,818 lb Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Horizontal Stone Lifting Clamp AHLC-2010-4T is the 4 tonne model in Aardwolf's horizontal clamp line, gripping concrete blocks and stone from 12 in. to 79 in. across with an 8,818 lb working load limit.\u003c\/p\u003e\n\u003cp\u003eThe 4T suffix is a real Aardwolf model distinction rather than a distributor code: it is the uprated version of the AHLC-2010 and carries both a different load limit and a different 12 in. minimum grip.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8,818 lb working load limit (4,000 kg) - the highest-rated clamp in the Aardwolf horizontal line\u003c\/li\u003e\n\u003cli\u003eGrip range 12 in. to 79 in. (300-2010 mm), so it takes full block and wide bundle work\u003c\/li\u003e\n\u003cli\u003eNet weight 503 lb, gross 547 lb\u003c\/li\u003e\n\u003cli\u003ePackaging 96.5 in. x 22 in. x 17.3 in., which is what determines how it arrives and where it can be stored\u003c\/li\u003e\n\u003cli\u003eModel number 2010 is the maximum grip in millimetres; 4T is the 4 tonne rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne horizontal stone lifting clamp\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eBlock yards, quarry loading docks and precast plants running an overhead crane or a heavy boom-equipped forklift, where the loads are wide and heavy enough that a smaller clamp would be working at its limit.\u003c\/p\u003e\n\u003cp\u003eIt is the wrong clamp for narrow loads. The jaws will not close below 12 in., so anything thinner - including any single slab - simply cannot be gripped; the Aardwolf Horizontal Stone Lifting Clamp AHLC-1370 closes to 11 in., and for actual slab work the Aardwolf Lifter 50 grips 3\/8 in. to 2 in. Be careful about the rest of the rigging too: a clamp rated 8,818 lb must not be hung from a fitting rated lower, so the 1.5 ton Aardwolf Swivel Hook and the 2,646 lb Aardwolf Lifter Twister are both below this clamp's rating and are not suitable in line with it at full load.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit of the Aardwolf Horizontal Stone Lifting Clamp AHLC-2010-4T?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes an 8,818 lb (4,000 kg) working load limit for the AHLC-2010-4T horizontal stone lifting clamp.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the grip range?\u003c\/h4\u003e\n\u003cp\u003e12 in. to 79 in. (300-2010 mm). The clamp cannot close on anything narrower than 12 in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat does the 4T in the model code mean?\u003c\/h4\u003e\n\u003cp\u003e4T means a 4 tonne working load limit, which is the 8,818 lb figure. It marks the uprated version of the AHLC-2010.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow heavy is the clamp itself?\u003c\/h4\u003e\n\u003cp\u003eThe AHLC-2010-4T weighs 503 lb net and 547 lb gross, and it ships in a package 96.5 in. x 22 in. x 17.3 in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan it lift a single stone slab?\u003c\/h4\u003e\n\u003cp\u003eNo. With a 12 in. minimum grip it cannot close on slab-thickness material; a slab lifter with a 3\/8 in. to 2 in. grip range is the correct tool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170117415132,"sku":"AAW AHLC-2010-4T","price":4576.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/3b7363ee-20cf-48d7-b2ab-e93c8c4e86ff.jpg?v=1786055301"},{"product_id":"stealth-seamer-90-degree-manual","title":"Omni Cubed Stealth Seamer Seam Setter – 5 in. Cups, Manual","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed 90-degree Stealth Seamer is a manual vacuum seam setter with 5 in. cups that pulls and holds a perpendicular joint - mitered aprons, butt-joints and compound corners - rather than an in-line countertop seam. It can be inverted to work an inside corner.\u003c\/p\u003e\n    \u003cp\u003eIt is the manual model, so each cup is charged by hand and there is no pump to carry or charge. Omni Cubed does not recommend it for porous material or for heavy waterfall pieces; the 90-degree Auto model is the upgrade for that work.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e5 in. vacuum cups, sized to land on an apron or a return\u003c\/li\u003e\n\u003cli\u003eSets perpendicular seams: mitered aprons, butt-joints and compound corners\u003c\/li\u003e\n\u003cli\u003eInvertible for inside corners\u003c\/li\u003e\n\u003cli\u003eManual operation - cups charged by hand, no pump and no battery\u003c\/li\u003e\n\u003cli\u003eShips with a sample roll of Kung Fu Tape for holding the joint closed while adhesive cures\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eOne 90-degree Stealth Seamer, manual\u003c\/li\u003e\n\u003cli\u003eTwo cup covers\u003c\/li\u003e\n\u003cli\u003eOne 25 yd sample roll of Kung Fu Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eFabricators and installers building mitered aprons, returns and compound corners on site, who need the two faces held square and tight while the adhesive sets. It is not the tool for a long in-line countertop seam - that is what the 8 in. cup Stealth Seamer models are for.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat kind of seam is a 90-degree seam setter for?\u003c\/h4\u003e\n\u003cp\u003eA 90-degree seam setter pulls and holds a joint where two faces meet perpendicular to each other - a mitered apron, a butt-joint or a compound corner - rather than a flat in-line seam between two countertop sections.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is it not recommended for?\u003c\/h4\u003e\n\u003cp\u003eOmni Cubed does not recommend the 90-degree Stealth Seamer Manual for porous material or for heavy waterfall pieces. For a waterfall edge specifically, the Omni Cubed Waterfall Jack is the correct tool: it clamps both sides of the edge and holds height and angle while the epoxy cures.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes the manual version need a pump?\u003c\/h4\u003e\n\u003cp\u003eNo. On the manual model each vacuum cup is charged by hand, so there is no pump, battery or charger in the kit.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan it work an inside corner?\u003c\/h4\u003e\n\u003cp\u003eYes - the unit can be inverted, which is what lets it reach an inside corner.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the cup size?\u003c\/h4\u003e\n\u003cp\u003eThe 90-degree and Nano Stealth Seamer models use 5 in. cups; the Pro models use 8 in. cups.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170117873884,"sku":"OCI 5145-90M-17","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/7bfee7ab-02d4-4938-a465-5898b22d71de.jpg?v=1786055304"},{"product_id":"edge-seamer-tool","title":"Omni Cubed Edge Seamer Seam Leveling Clamp – 10 in. Rail, 10 in. x 3.5 in. x 5 in.","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Edge Seamer is a 10 in. mechanical rail clamp that levels a joint along the edge of the material and takes the twist out of sink rails and cutouts. It grips material from 0.55 in. to 1.97 in. (14-50 mm) thick, measures 10 in. x 3.5 in. x 5 in. and weighs 2.9 lb.\u003c\/p\u003e\n    \u003cp\u003eIt is a mechanical clamp, not a vacuum tool: there is nothing to pump and no cup to seal, so it works on a narrow sink rail where a suction cup has no flat face to grip. It can be used on its own or on the same joint as a vacuum seam setter.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e10 in. rail in anodized aluminum and stainless steel, 10 in. x 3.5 in. x 5 in. overall\u003c\/li\u003e\n\u003cli\u003eTwo adjustment clamps supplied with the rail\u003c\/li\u003e\n\u003cli\u003e0.55-1.97 in. (14-50 mm) clamping range covers standard and built-up edge thicknesses\u003c\/li\u003e\n\u003cli\u003eMechanical clamping action - no pump, no vacuum cups, no battery\u003c\/li\u003e\n\u003cli\u003e2.9 lb, light enough to leave clamped while adhesive sets\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eOne 10 in. Edge Seamer rail\u003c\/li\u003e\n\u003cli\u003eTwo adjustment clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eCountertop fabricators and installers who need to flatten a seam at a sink cutout or along a material edge, and shops that want a mechanical alternative to stacking shims. It suits anyone already running a vacuum seam setter who needs a second tool for the narrow rail sections a cup cannot hold.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat thickness of material does the Edge Seamer clamp?\u003c\/h4\u003e\n\u003cp\u003eThe Omni Cubed Edge Seamer has a clamping range of 0.55 in. to 1.97 in. (14-50 mm).\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs this a vacuum seam setter?\u003c\/h4\u003e\n\u003cp\u003eNo. This is a mechanical rail clamp - it grips the material rather than holding it with suction, so it needs no pump, cups or power. For joining and leveling two full countertop sections with vacuum cups, the Omni Cubed Stealth Seamer Seam Setter with 8 in. cups is the vacuum tool in the same range.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan it be used alongside a vacuum seam setter?\u003c\/h4\u003e\n\u003cp\u003eYes. A mechanical edge clamp and a vacuum seam setter act on different parts of the same joint, so both can be applied to one seam at the same time.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is it used for at a sink cutout?\u003c\/h4\u003e\n\u003cp\u003eA narrow sink rail is the part of a countertop most likely to twist out of plane, and a 10 in. rail clamp pulls that twist out and holds the two edges level while the adhesive cures.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170118037724,"sku":"OCI 101-ES-17","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/9dc91c1e-fc0f-402d-969e-7d3f6c3b803d.jpg?v=1786055305"},{"product_id":"aardwolf-lifter-30-type-a-wide-jaw-with-rollers","title":"Aardwolf Lifter 30 Wide Jaw – Rubber-coated Jaws, Rollers, 2,646 lb Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Lifter 30 Wide Jaw is an auto-locking slab lifter with wide rubber-coated jaws and side centering rollers, gripping material from 0 to 1-1\/8 in. thick.\u003c\/p\u003e\n\u003cp\u003eWide jaws are the point of it. Spreading the clamping force over a broader footprint is what lets a thin or large-format panel be picked without concentrating load on a narrow band, which is why Aardwolf puts this series against thin and large-format work rather than against ordinary slab stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrip range 0 to 1-1\/8 in. (0-30 mm), manufacturer-published on the Wide Jaw Series line page\u003c\/li\u003e\n\u003cli\u003eWide rubber-coated jaws that spread clamping load across thin panels\u003c\/li\u003e\n\u003cli\u003eAuto-lock action - the A in the model code - so the lifter locks under load and releases when the load is set down\u003c\/li\u003e\n\u003cli\u003eSide centering rollers to bring the lifter onto the panel edge squarely\u003c\/li\u003e\n\u003cli\u003ePart of Aardwolf's Wide Jaw Series alongside the AL20AWJ and AL40AWJ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne slab lifter\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eFabricators and installers handling thin and large-format panels, including porcelain, where an ordinary narrow-jaw lifter concentrates its grip in one place and a wide jaw does not.\u003c\/p\u003e\n\u003cp\u003eIt is limited by its jaw opening, not by anything else: it will not close on material thicker than 1-1\/8 in. (30 mm), so 4 cm stone is out of range and the Aardwolf Lifter 50 with its 3\/8 in. to 2 in. grip is the lifter for it. It is also a crane or forklift attachment rather than a hand tool, so if two people are carrying panels on foot the Aardwolf Sheet Material Carry Clamp, 0 to 2 in. grip and sold as a pair, is the correct choice. To get the jaws under a panel lying flat in a bundle, use an Aardwolf Wedgee Slab Wedge to open the gap first rather than levering with a hand.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat thickness of material does the Aardwolf Lifter 30 Wide Jaw grip?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes a grip range of 0 to 1-1\/8 in. (0-30 mm) for the Wide Jaw Series AL30AWJ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit?\u003c\/h4\u003e\n\u003cp\u003eThe working load limit we hold for this lifter is 2,646 lb, and it is the figure carried on the product title. Aardwolf's published Wide Jaw Series spec table covers the AL20AWJ model only, so confirm the rating with Aardwolf before relying on it for a rigging plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhy does it have wide jaws?\u003c\/h4\u003e\n\u003cp\u003eWide jaws spread the clamping force over a larger area of the panel, which is what suits them to thin and large-format material that would be marked or stressed by a narrow grip.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat does the A in AL30AWJ mean?\u003c\/h4\u003e\n\u003cp\u003eIn Aardwolf's coding, A means auto-lock and WJ means wide jaw; the number is the maximum grip in millimetres.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eAre the rollers an option?\u003c\/h4\u003e\n\u003cp\u003eNo. Aardwolf's Wide Jaw Series page describes side rollers for precise centering as a standard feature of the series, so the -R suffix in the sales code describes equipment the lifter already has.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170119250140,"sku":"AAW AL30AWJ-R","price":1115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/189ebe2b-4151-422e-bcde-ee532604d58a.jpg?v=1786055315"},{"product_id":"pro-stealth-seamer-auto","title":"Omni Cubed Stealth Seamer Seam Setter – 8 in. Cups, Auto","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Pro Stealth Seamer Auto is a vacuum seam setter with 8 in. cups that ships as two units with a vacuum pump and a storage case, for joining, leveling and flattening warped countertop sections at a seam. Eight leveling points let each side of the joint be brought into plane independently.\u003c\/p\u003e\n    \u003cp\u003eThe unit count is the thing to check when comparing prices in this line: this Auto kit is two seam setters, a pump and a case at 35 lb complete, while the Pro Manual is a single unit with no pump and no case. The pump runs on AC or on batteries, so it works on a site with no power.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e8 in. non-marking synthetic rubber cups - the largest in the Stealth Seamer line\u003c\/li\u003e\n\u003cli\u003eEight leveling points for pulling warp out of a joint\u003c\/li\u003e\n\u003cli\u003eVacuum pump powered by AC or battery, with adapters for both\u003c\/li\u003e\n\u003cli\u003eShips as two units, one for each side of the seam\u003c\/li\u003e\n\u003cli\u003e35 lb complete, packed in a storage case\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eTwo Pro Stealth Seamer units\u003c\/li\u003e\n\u003cli\u003eFour cup covers\u003c\/li\u003e\n\u003cli\u003eVacuum pump with AC and battery adapters\u003c\/li\u003e\n\u003cli\u003eStorage case\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eProduction shops and installers setting full-size kitchen and island seams where warp has to be pulled out and the joint held flat while the adhesive cures. Crews working only small returns and tight spaces will be better served by the 5 in. cup models.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow many seam setters are in the Auto kit?\u003c\/h4\u003e\n\u003cp\u003eThe Omni Cubed Pro Stealth Seamer Auto ships as two seam setter units, with four cup covers, a vacuum pump with AC and battery adapters, and a storage case - 35 lb complete.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the difference between the Auto and the Manual model?\u003c\/h4\u003e\n\u003cp\u003eThe Auto kit contains two seam setter units plus a vacuum pump and a case, and the pump supplies the vacuum; the Omni Cubed Stealth Seamer Seam Setter with 8 in. cups, Manual is a single unit with two cup covers, no pump and no case, and its cups are charged by hand. The unit count is a large part of the price difference.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes the pump need mains power?\u003c\/h4\u003e\n\u003cp\u003eNo. The vacuum pump runs on AC power or on batteries, with adapters for both supplied in the kit.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan it flatten a warped slab at the seam?\u003c\/h4\u003e\n\u003cp\u003eEight leveling points let each side of the joint be adjusted independently, which is how a warped section is brought into plane and held there while the adhesive sets.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhich cup size should I choose?\u003c\/h4\u003e\n\u003cp\u003e8 in. cups give the most grip and leveling authority on full-size countertop seams; 5 in. cups are the choice for narrow pieces and confined spaces.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170119676124,"sku":"OCI 8129-PSA-19","price":1495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/a178482c-c1d4-46c8-966b-1f75ec272b6c.jpg?v=1786055317"},{"product_id":"aardwolf-slab-wedge-wedgee","title":"Aardwolf Wedgee Slab Wedge – 35 mm Wedge, Creates Clearance for Jaw Insertion","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Wedgee Slab Wedge is a 35 mm wedge slipped between stacked slabs to open a gap, so a lifting clamp jaw can be inserted without anyone putting a hand into the stack.\u003c\/p\u003e\n\u003cp\u003eWedgee is Aardwolf's own name for it; the manufacturer's category is wedge spacers. It carries no load rating and holds nothing up - its whole job is to create the clearance that lets a rated clamp be seated safely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e35 mm wedge, used on slabs up to 30 mm thick\u003c\/li\u003e\n\u003cli\u003eCreates clearance at the slab edge so a lifting clamp jaw can be inserted\u003c\/li\u003e\n\u003cli\u003eKeeps hands out of the gap between stacked slabs, which is where the injuries happen\u003c\/li\u003e\n\u003cli\u003eUsed in pairs under opposite edges when a slab is being freed from a pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eSlab yards, container unloading crews and shop staff pulling slabs out of tightly packed racks and bundles, where the first problem is always getting something under the edge.\u003c\/p\u003e\n\u003cp\u003eThis is not a lifting or supporting device and has no working load limit. Never use it to hold slabs apart while someone reaches into a stack, and never treat it as a chock for a leaning slab - it is a jaw-insertion aid only. Once the gap is open, the lift itself is the clamp's job: the Aardwolf Lifter 50 grips 3\/8 in. to 2 in. at 2,646 lb, and the Aardwolf Lifter 30 Wide Jaw takes thin and large-format panels from zero thickness. For carrying panels on foot rather than lifting them by crane, use the Aardwolf Sheet Material Carry Clamp.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the Aardwolf Wedgee Slab Wedge for?\u003c\/h4\u003e\n\u003cp\u003eIt is slipped under or between slabs to create a gap so a lifting clamp's jaw can be inserted safely, instead of a hand being used to lever the slab clear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat size is it?\u003c\/h4\u003e\n\u003cp\u003eIt is a 35 mm wedge, used with slabs up to 30 mm thick.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes it have a load rating?\u003c\/h4\u003e\n\u003cp\u003eNo. A slab wedge is a clearance tool, not a lifting or supporting device, and it should never be used to hold a load.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs Wedgee a real product name?\u003c\/h4\u003e\n\u003cp\u003eYes. Wedgee is Aardwolf's own name for this wedge; the manufacturer's category for it is wedge spacers, and Aardwolf India lists it as the wedge spacer AWG1.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170121281756,"sku":"AAW AWG1","price":17.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/afc9b8bf-87d5-436c-89fa-c86870308a99.jpg?v=1786055325"},{"product_id":"aardwolf-slab-buggy-double-side","title":"Aardwolf Slab Buggy Double Side – 8 in. Slab Storage Width, 1,653 lb Total Working Load","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Slab Buggy Double Side is a four-wheeled double-sided transport cart for slabs and sheet material, carrying 827 lb per side and 1,653 lb in total across 8 in. of slab storage width on each face.\u003c\/p\u003e\n\u003cp\u003eBoth figures matter. The total rating assumes the load is shared between the two sides; loading one face to the full 1,653 lb would be a genuine overload, which is why the per-side number is published alongside it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1,653 lb total working load limit (750 kg), 827 lb per side (375 kg)\u003c\/li\u003e\n\u003cli\u003e8 in. of slab storage width on each side (204.5 mm)\u003c\/li\u003e\n\u003cli\u003eTwo swivel wheels with brakes plus two rigid pneumatic wheels, so the buggy steers and then parks\u003c\/li\u003e\n\u003cli\u003eRubber-protected frame surfaces with replaceable strips, so the contact faces can be renewed rather than the frame being scrapped\u003c\/li\u003e\n\u003cli\u003eNet weight 136 lb\u003c\/li\u003e\n\u003cli\u003ePackaging 47.2 in. x 33.1 in. x 13 in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne slab buggy\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eFabrication shops and glaziers moving slabs and sheets between saw, edge and finishing stations, and site crews wheeling material across a floor once it has been delivered.\u003c\/p\u003e\n\u003cp\u003eIt is a push cart, not a lifting frame. It is not built to be craned or forklifted with a load on it, and it is not the equipment for a truck delivery: full slabs going to site belong on the Aardwolf Transport Frame TF2000PC at 5,511 lb total, or on the heavy-duty Aardwolf Transport Frame AF2440-QP at 6,614 lb where the loaded frame itself is lifted onto the building. For finished countertops laid flat rather than slabs carried on edge, the Omni Cubed Pro-Cart at 1,000 lb capacity is the right shape of tool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the load capacity of the Aardwolf Slab Buggy Double Side?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes 375 kg (827 lb) per side and 750 kg (1,653 lb) in total for the double-sided slab buggy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan I load just one side to the full capacity?\u003c\/h4\u003e\n\u003cp\u003eNo. The 1,653 lb figure is the total across both sides; each side is rated 827 lb, and loading one face to the total would overload it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow much slab width does each side hold?\u003c\/h4\u003e\n\u003cp\u003eEach side has 8 in. (204.5 mm) of slab storage width.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat wheels does it run on?\u003c\/h4\u003e\n\u003cp\u003eTwo swivel wheels with brakes and two rigid pneumatic wheels, so a loaded buggy can be steered and then locked in place.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes the frame protect the slab faces?\u003c\/h4\u003e\n\u003cp\u003eThe frame's contact surfaces are rubber-protected with replaceable strips, so worn strips can be renewed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170122133724,"sku":"AAW SBDS01","price":798.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/15c23c04-e74d-4279-833b-b8213f8b27ff.webp?v=1786055329"},{"product_id":"transport-frame-qp-aardwolf-96-5x48-8x14-2","title":"Aardwolf Transport Frame – 96.5 x 48.8 x 14.2 in., 6,614 lb Working Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Transport Frame AF2440-QP is a heavy-duty double-sided slab transport frame with a 6,614 lb working load limit, built to carry stone slabs to site and be moved as a loaded unit.\u003c\/p\u003e\n\u003cp\u003eIt belongs to Aardwolf's Transport Frames - Heavy Duty line, which is a separate and stronger line from the TF-series frames. The QP suffix is a genuine Aardwolf model code and Aardwolf does not publish an expansion for it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6,614 lb working load limit (3,000 kg) - Aardwolf's Heavy Duty transport frame rating\u003c\/li\u003e\n\u003cli\u003e11.6 in. of slab storage base width on each side, so the frame is loaded from both faces\u003c\/li\u003e\n\u003cli\u003eNet weight 542 lb, gross 556 lb - the frame alone is a forklift or crane item, not a hand-moved one\u003c\/li\u003e\n\u003cli\u003eModel AF2440-QP, one of the AF1850QP \/ AF2440QP \/ AF2750QP \/ AF3500QP family, sized by frame length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne transport frame\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eSlab suppliers, glaziers and fabricators delivering full slabs to construction sites, where the frame and its load are lifted together and set down on a floor rather than unloaded piece by piece.\u003c\/p\u003e\n\u003cp\u003eThis is not a shop cart. At 542 lb empty it cannot be pushed around by hand once loaded, and it is not the frame to buy for moving slabs between stations inside a fabrication shop - the Aardwolf Slab Buggy Double Side, at 1,653 lb total on braked swivel wheels, is the tool for that. If you want a lighter double-sided frame for yard and truck work rather than heavy site delivery, the Aardwolf Transport Frame TF2000PC is 78-3\/4 in. long with a 5,511 lb total limit. Whatever hook or tine you lift from must be rated at or above the loaded weight; the Aardwolf Swivel Hook is only a 1.5 ton fitting and is not enough on its own for a fully loaded frame.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the load limit of the Aardwolf Transport Frame AF2440-QP?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes a working load limit of 6,614 lb (3,000 kg) for the AF2440QP transport frame.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow much slab width does each side hold?\u003c\/h4\u003e\n\u003cp\u003eThe slab storage base is 11.6 in. wide on each side of the frame.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow heavy is the empty frame?\u003c\/h4\u003e\n\u003cp\u003eThe AF2440QP frame weighs 542 lb net and 556 lb gross, so it is handled with a forklift or crane rather than by hand.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat does QP mean in the model number?\u003c\/h4\u003e\n\u003cp\u003eQP is a model suffix Aardwolf uses across the AF1850QP, AF2440QP, AF2750QP and AF3500QP heavy-duty frames. Aardwolf does not publish what the letters stand for, so it should be quoted as printed rather than expanded.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs this the same as an Aardwolf TF-series transport frame?\u003c\/h4\u003e\n\u003cp\u003eNo. The AF-series QP frames are Aardwolf's Transport Frames - Heavy Duty line; the TF2000 \/ TF2440 \/ TF3050 frames are a separate, lighter-rated line.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170122723548,"sku":"AAW AF2440-QP","price":3292.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/94eb3dd3-84ca-45f3-84dc-e032faf110c2.jpg?v=1786055333"},{"product_id":"sink-hole-saver-edge-8ft","title":"Omni Cubed Sink Hole Saver Edge V3 Reinforcement Rail – 8 ft.","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Sink Hole Saver Edge v3 in the 8 ft. length is the longest reinforcement rail in the line, a 95 in. x 3.5 in. x 6 in. rail with sliding mechanical clamps that grip the edge of a piece and keep it from flexing at a cutout. The clamps take material from 0.7 in. to 2.1 in. (18-53 mm) thick.\u003c\/p\u003e\n    \u003cp\u003eIt is marketed as the 8 ft. model; the rail itself measures 95 in. rather than a full 96 in. It is a current product, not a discontinued length, and shares its clamps and clamping range with the 4 ft. and 6 ft. rails.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e95 in. rail, 3.5 in. x 6 in. section - the longest in the line\u003c\/li\u003e\n\u003cli\u003eMechanical edge clamps slide along the rail so support can be set outside two cutouts at once\u003c\/li\u003e\n\u003cli\u003e0.7-2.1 in. (18-53 mm) clamping range\u003c\/li\u003e\n\u003cli\u003eNo pump, battery or vacuum cups required\u003c\/li\u003e\n\u003cli\u003eSame clamp system as the 4 ft. and 6 ft. rails\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\u003cli\u003eOne 95 in. reinforcement rail with sliding mechanical clamps\u003c\/li\u003e\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eFabricators and installers moving long islands and runs with more than one cutout, where a shorter rail leaves unsupported material outboard of the clamps. It suits shops that want reinforcement with nothing to charge or seal before a delivery.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow long is the 8 ft. rail actually?\u003c\/h4\u003e\n\u003cp\u003eThe rail measures 95 in., slightly under a full 96 in., and is sold by Omni Cubed as the 8 ft. model.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs the 8 ft. length still available?\u003c\/h4\u003e\n\u003cp\u003eYes. The Omni Cubed Sink Hole Saver Edge v3 is current in all three rail lengths - 4 ft., 6 ft. and 8 ft.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat thickness of material can it clamp?\u003c\/h4\u003e\n\u003cp\u003eThe clamping range is 0.7 in. to 2.1 in. (18-53 mm), the same on every rail length in the line.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhen is a shorter rail the better choice?\u003c\/h4\u003e\n\u003cp\u003eWhen the piece is short enough that the clamps still land outside the cutout - a 72 in. Sink Hole Saver Edge v3 rail is easier to handle in a truck and on a stair, and clamps material in the same thickness range.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170122789084,"sku":"OCI 8101-SHSE-17","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/7bf31b23-9e6a-4d03-839f-351294ca9210.jpg?v=1786055334"},{"product_id":"vacuum-cup-8-inch-metal-handle-low-mark","title":"Wood's Powr-Grip Vacuum Cup – 8 in. Flat, N4950LM, Low-Marking Pad, 125 lb Capacity","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eThe Wood's Powr-Grip Vacuum Cup (Model N4950LM, Stock #91505) is an 8 in. metal-handle hand cup with a low-marking pad, rated to lift 125 lb [57 kg] on flat, smooth, nonporous surfaces.\u003c\/p\u003e\n  \u003ch3\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eLow-marking rubber compound designed to avoid leaving marks or stains\u003c\/li\u003e\n    \u003cli\u003e125 lb [57 kg] rated load capacity\u003c\/li\u003e\n    \u003cli\u003eMetal handle\u003c\/li\u003e\n    \u003cli\u003eRated for flat, smooth, nonporous surfaces (Wood's Powr-Grip's own Ideal Uses)\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eWhat's Different From the Standard N4950\u003c\/h3\u003e\n  \u003cp\u003eSame 125 lb rating and metal handle as the standard N4950 (Wood's Powr-Grip Vacuum Cup – 8 in. Flat, N4950, 125 lb Capacity), but with a low-marking pad compound instead of the standard pad. Unlike the N4950, Wood's Powr-Grip does not supply a carrying case with the N4950LM — its case is a separate part (Stock #29334).\u003c\/p\u003e\n  \u003ch3\u003eNot for Curved Surfaces\u003c\/h3\u003e\n  \u003cp\u003eThis is a flat-pad cup, not built for curved or irregular surfaces. For a curved-surface, low-marking metal hand cup, Wood's Powr-Grip's equivalent is the 10 in. N6450LM (Wood's Powr-Grip Vacuum Cup – 10 in. Concave, N6450LM, Low-Marking Pad, 175 lb Capacity).\u003c\/p\u003e\n  \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat is the load capacity?\u003c\/h4\u003e\n    \u003cp\u003e125 lb [57 kg].\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat makes the pad \"low-marking\"?\u003c\/h4\u003e\n    \u003cp\u003eWood's Powr-Grip's rubber compound is designed to avoid leaving marks or stains on the surface being lifted.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eDoes it come with a carrying case?\u003c\/h4\u003e\n    \u003cp\u003eNo — unlike the standard N4950, Wood's Powr-Grip sells the carrying case for this cup as a separate part.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat surfaces is it rated for?\u003c\/h4\u003e\n    \u003cp\u003eFlat, smooth, nonporous surfaces — not curved or textured surfaces.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Woods Powr Grip","offers":[{"title":"Default Title","offer_id":52170124165340,"sku":"WOO 91505","price":133.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/5fd21990-6278-4db3-8d9d-fd9cfe0b5b09.jpg?v=1786055344"},{"product_id":"aardfwolf-scissor-lifter-200-black-rubber","title":"Aardwolf Scissor Lifter – 2 in. to 8 in. Grip, 3,307 lb Working Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Scissor Lifter ASL200 is a gravity-operated scissor clamp that grips blocks and heavy stone between two pivoting arms across a 2 in. to 8 in. range, with a 3,307 lb working load limit.\u003c\/p\u003e\n\u003cp\u003eAardwolf's own line name for it is the Scissor Clamp Lifter, and the distinction matters: this is a clamp that hangs from a crane hook or forklift boom and tightens on the load as it lifts, not a scissor lift table or platform. The model number is the maximum grip in millimetres.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrip range 2 in. to 8 in. (50-200 mm)\u003c\/li\u003e\n\u003cli\u003e3,307 lb working load limit (1,500 kg)\u003c\/li\u003e\n\u003cli\u003eGravity-controlled auto-locking action - the load's own weight closes the arms\u003c\/li\u003e\n\u003cli\u003eNet weight 104 lb, gross 110 lb\u003c\/li\u003e\n\u003cli\u003ePackaging 820 x 230 x 450 mm, so it stores on a shelf rather than a pallet\u003c\/li\u003e\n\u003cli\u003eOne of the ASL105 \/ ASL125 \/ ASL200 \/ ASL300 \/ ASL450 family, stepped by grip range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne scissor clamp lifter\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eHardscape yards, block suppliers and masonry operations lifting kerbs, blocks and thick stone with a crane or a boom-equipped forklift, where the material is thick enough for a scissor action to bite.\u003c\/p\u003e\n\u003cp\u003eThe 2 in. minimum grip rules out slab work entirely. The arms cannot close on 2 cm or 3 cm stone, so a slab lifter is the tool for that - the Aardwolf Lifter 50 grips 3\/8 in. to 2 in., though at 2,646 lb it is rated below this clamp's 3,307 lb, so re-check the load. At the other end, material wider than 8 in. needs a block clamp: the Aardwolf Versa Block Clamp opens to 23-5\/8 in. and its reversible jaws also grip internally. Whatever you hang it from must be rated for the load - the Aardwolf Swivel Hook is a 1.5 ton fitting, which is below this clamp's 3,307 lb limit at full load.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit of the Aardwolf Scissor Lifter ASL200?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes a 3,307 lb (1,500 kg) working load limit for the ASL200 scissor clamp lifter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the grip range?\u003c\/h4\u003e\n\u003cp\u003e2 in. to 8 in. (50-200 mm). The arms will not close on anything thinner than 2 in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs this a scissor lift table?\u003c\/h4\u003e\n\u003cp\u003eNo. It is a scissor-action clamp that grips a block or stone between two arms and is lifted by a crane or forklift. A scissor lift is a different class of machine entirely, and the two are often confused because of the name.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow does the clamp hold the load?\u003c\/h4\u003e\n\u003cp\u003eThe action is gravity-controlled: lifting force pulls the arms together, so the heavier the load the tighter the grip, and the arms open again when the load is grounded.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow heavy is the clamp?\u003c\/h4\u003e\n\u003cp\u003eThe ASL200 weighs 104 lb net and 110 lb gross.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170124820700,"sku":"AAW ASL200","price":1076.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/16ce84e2-47f1-441b-9278-4ce94c16edcc.jpg?v=1786055349"},{"product_id":"sink-hole-saver-edge-v3-6ft","title":"Omni Cubed Sink Hole Saver Edge V3 Reinforcement Rail – 6 ft.","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Sink Hole Saver Edge v3 in the 6 ft. length is a 72 in. x 3.5 in. x 6 in. reinforcement rail whose mechanical clamps grip the edge of a piece to keep it from flexing or breaking at a cutout during fabrication, transport and install. The clamps take material from 0.7 in. to 2.1 in. (18-53 mm) thick.\u003c\/p\u003e\n    \u003cp\u003eThe 6 ft. rail is the middle length in the line and spans a sink cutout with support well past it on both sides. Being mechanical, it needs an accessible edge to clamp to - if the edge is boxed in, a surface-mounted vacuum rail is the right answer instead.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e72 in. rail, 3.5 in. x 6 in. section - spans a sink cutout with reach either side\u003c\/li\u003e\n\u003cli\u003eMechanical edge clamps slide along the rail for placement around the cutout\u003c\/li\u003e\n\u003cli\u003e0.7-2.1 in. (18-53 mm) clamping range\u003c\/li\u003e\n\u003cli\u003eNo pump, battery or vacuum cups required\u003c\/li\u003e\n\u003cli\u003eMade in 4 ft., 6 ft. and 8 ft. rails with identical clamping range\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\u003cli\u003eOne 72 in. reinforcement rail with sliding mechanical clamps\u003c\/li\u003e\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eFabricators and installers moving countertops with sink cutouts, cooktop cutouts or long backsplashes, where the piece is most likely to break at the narrowest section. It also suits shops that want reinforcement without a vacuum pump to charge or cups to seal.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow long is the 6 ft. Sink Hole Saver Edge v3?\u003c\/h4\u003e\n\u003cp\u003eThe rail measures 72 in. long with a 3.5 in. x 6 in. section.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat thickness of material can it clamp?\u003c\/h4\u003e\n\u003cp\u003eThe Omni Cubed Sink Hole Saver Edge v3 has a 0.7-2.1 in. (18-53 mm) clamping range across all three rail lengths.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the difference between the Edge version and the vacuum versions?\u003c\/h4\u003e\n\u003cp\u003eThe Edge version clamps mechanically onto the edge of the material, while the vacuum versions mount to the face of the piece using suction cups and need a pump or hand-pumped cups. Mechanical clamping needs an accessible edge; vacuum mounting does not.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eShould I buy the 6 ft. or the 8 ft. rail?\u003c\/h4\u003e\n\u003cp\u003eChoose by the span you need supported rather than by the size of the cutout: the 8 ft. Sink Hole Saver Edge v3 rail carries support further out on a long island or a run with two cutouts.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170125672668,"sku":"OCI 6101-SHSE-17","price":445.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/5c82b1f2-8be7-470a-b782-227012a03694.jpg?v=1786055353"},{"product_id":"stone-carrying-clamp-pair-0-60mm-0-2in3-8-inches-grip-range-white-rubber","title":"Aardwolf Sheet Material Carry Clamp – 0 to 2 in. Grip, 441 lb Working Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Sheet Material Carry Clamp SCC03-W is a hand-carry clamp for sheet and panel material, sold as a pair, gripping 0 to 2 in. with a 441 lb working load limit and a vulcanized white rubber jaw lining.\u003c\/p\u003e\n\u003cp\u003eWhite lining is the point of the -W variant: a white rubber face is chosen where a black pad could mark light-colored stone. The clamp is gravity-actuated - the weight of the panel is what pulls the jaw closed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrip range 0 to 2 in. (0-50 mm), the manufacturer's published figure for SCC03\u003c\/li\u003e\n\u003cli\u003e441 lb working load limit (200 kg)\u003c\/li\u003e\n\u003cli\u003eVulcanized white rubber jaw lining, chosen to avoid marking light-colored surfaces\u003c\/li\u003e\n\u003cli\u003eSold as a pair - two clamps, one for each end of the panel\u003c\/li\u003e\n\u003cli\u003ePart of Aardwolf's Sheet Material Carry Clamps line (SCC02 \/ SCC03 \/ SCC05 \/ SCC06 \/ SCC07), stepped by grip range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eTwo carry clamps (sold as a pair)\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eTwo-person crews carrying stone, glass or board panels by hand across a shop floor, up a stair or through a house where no lifting plant will reach.\u003c\/p\u003e\n\u003cp\u003eCheck the jaw opening before ordering, because this listing has carried a wrong number: the clamp closes on material up to 2 in. (50 mm), not 2-3\/8 in. For thicker sheet material the Omni Cubed Mega-Jaw Carry Clamp opens to 61 mm and is rated 500 lb per pair. This is also a hand tool and not rigging - it must never be hung from a crane hook or a forklift; craned slab work needs a rated slab lifter such as the Aardwolf Lifter 50 at 2,646 lb. To get the jaws onto a panel that is packed tight in a bundle, open the gap first with an Aardwolf Wedgee Slab Wedge rather than with a hand.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat thickness will the Aardwolf Sheet Material Carry Clamp grip?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes 0-50 mm, which is 0 to 2 in., for the SCC03 carry clamp. Listings quoting 60 mm or 2-3\/8 in. overstate the jaw opening.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit?\u003c\/h4\u003e\n\u003cp\u003e441 lb (200 kg), published by Aardwolf for the SCC03 carry clamp.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs it sold singly or as a pair?\u003c\/h4\u003e\n\u003cp\u003eAs a pair. Two clamps are supplied, because the tool is used with one person at each end of the panel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhy is the rubber white?\u003c\/h4\u003e\n\u003cp\u003eA white vulcanized rubber jaw lining is used where a darker pad could leave marks on light-colored stone or panel material.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan it be used with a crane?\u003c\/h4\u003e\n\u003cp\u003eNo. This is a hand-carry clamp rated 441 lb, not a rigging component, and it must not be hung from a hook or a forklift.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170126229724,"sku":"AAW SCC03-W","price":335.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/350c9a47-b9b9-4017-be6d-c708fa12f3ab.jpg?v=1786055358"},{"product_id":"sink-hole-saver-auto-4ft","title":"Omni Cubed Sink Hole Saver – 4 ft., Auto Vacuum Reinforcement Rail","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Sink Hole Saver in this 4 ft. Auto configuration is a vacuum reinforcement rail: it mounts to the face of the material and supports a cutout during lifting, transport and installation, with a pump supplying the vacuum rather than a hand pump. It is the Auto member of an earlier generation of the vacuum Sink Hole Saver line and is no longer listed in the current Omni Cubed catalogue.\u003c\/p\u003e\n    \u003cp\u003eBeyond the length and the Auto designation, no specification for this part number is published by Omni Cubed or by any distributor we could find, so nothing further is stated here. The current-generation replacements are separate products with their own rails, cups and pumps, and their figures do not carry back to this one.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eVacuum reinforcement rail, surface-mounted to the face of the material\u003c\/li\u003e\n\u003cli\u003eAuto configuration - pump-supplied vacuum rather than a hand pump\u003c\/li\u003e\n\u003cli\u003e4 ft. length\u003c\/li\u003e\n\u003cli\u003eEarlier-generation part number, superseded in the current Omni Cubed line\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eFabricators looking for a replacement or a second unit to match a 4 ft. vacuum Sink Hole Saver already in the shop. Anyone buying a vacuum reinforcement rail for the first time should be looking at the current-generation models instead, which are supported and specified.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs this the current model?\u003c\/h4\u003e\n\u003cp\u003eNo. This part number is not listed in the current Omni Cubed catalogue and appears to have been superseded. Omni Cubed's current v6 vacuum reinforcement rails run to 4 ft., 7 ft. and telescoping Slider models; of those, the ones in our catalogue are the Omni Cubed Sink Hole Saver V6 in 7 ft. Auto and the telescoping Slider.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat are the vacuum cup count, capacity and weight?\u003c\/h4\u003e\n\u003cp\u003eOmni Cubed does not publish those figures for this part number, and they are not carried over from the current-generation rails, which are different products. Contact us before ordering if the specification is critical to the job.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the difference between Auto and Manual on a Sink Hole Saver?\u003c\/h4\u003e\n\u003cp\u003eOn an Omni Cubed vacuum Sink Hole Saver, Auto means a pump maintains the vacuum in the cups, while Manual means each cup is charged by hand with a thumb pump and re-pumped as needed.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat should I buy instead if I need a current model?\u003c\/h4\u003e\n\u003cp\u003eThis part number appears to have been superseded by Omni Cubed's 4 ft. Sink Hole Saver v6 Auto, SHS-4A-20 - an identification inferred from the part numbering and the year codes rather than stated by Omni Cubed. A current 4 ft. Auto rail therefore does exist, but we do not stock SHS-4A-20, so there is no same-length replacement in our catalogue.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170127605980,"sku":"OCI 4149-SHSA-17","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/107d7f48-51be-44e1-84e1-ed80cd816c22.jpg?v=1786055368"},{"product_id":"suction-cup-10-inch-metal-handle","title":"Wood's Powr-Grip Vacuum Cup – 10 in. Concave, N6450, 175 lb Capacity","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eThe Wood's Powr-Grip Vacuum Cup (Model N6450, Stock #91800) is a 10 in. metal-handle hand cup with a concave pad, rated to lift 175 lb [79 kg] on curved or irregular nonporous surfaces.\u003c\/p\u003e\n  \u003ch3\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e175 lb [79 kg] rated load capacity\u003c\/li\u003e\n    \u003cli\u003eMetal handle\u003c\/li\u003e\n    \u003cli\u003eConcave pad built for curved or irregular nonporous surfaces (Wood's Powr-Grip's own Ideal Uses)\u003c\/li\u003e\n    \u003cli\u003eSupplied with a protective carrying case\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eNot for Flat Surfaces\u003c\/h3\u003e\n  \u003cp\u003eWood's Powr-Grip's flat metal hand cups top out at 9 in. (Model N5450); this 10 in. cup exists only as a concave pad for curved or irregular surfaces. For a flat, smooth, nonporous surface, use the Wood's Powr-Grip 8 in. N4950 (Wood's Powr-Grip Vacuum Cup – 8 in. Flat, N4950, 125 lb Capacity) instead.\u003c\/p\u003e\n  \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat is the load capacity?\u003c\/h4\u003e\n    \u003cp\u003e175 lb [79 kg].\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat surfaces is it rated for?\u003c\/h4\u003e\n    \u003cp\u003eCurved or irregular nonporous surfaces — not flat surfaces.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eDoes it come with a carrying case?\u003c\/h4\u003e\n    \u003cp\u003eYes, Wood's Powr-Grip supplies the N6450 with a protective carrying case.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eIs a low-marking pad version available?\u003c\/h4\u003e\n    \u003cp\u003eYes — the N6450LM (Wood's Powr-Grip Vacuum Cup – 10 in. Concave, N6450LM, Low-Marking Pad, 175 lb Capacity) uses a low-marking rubber compound at the same 175 lb rating.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Woods Powr Grip","offers":[{"title":"Default Title","offer_id":52170127769820,"sku":"WOO 91800","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/ca7c79dd-1fb9-4b2b-9a71-a6cac4b4b163.jpg?v=1786055369"},{"product_id":"slab-rack-extra-strong-post-50x50x5-1600-63-high-with-cap","title":"Aardwolf Slab Rack Posts – 63 in. High, Extra Strong, 345 MPa Yield Strength","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Slab Rack Post is a single 63 in. upright for slab and remnant racks, made from 2 in. x 2 in. square steel tube with a 0.2 in. wall in 345 MPa yield strength steel, supplied with a rubber cap.\u003c\/p\u003e\n\u003cp\u003eExtra strong refers to the wall thickness: 5 mm of wall in a 50 x 50 mm section is what separates this post from a lighter upright, and 345 MPa is the yield strength of the steel it is rolled from. It is a component, not a rack.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e63 in. high (1600 mm) - one of Aardwolf's 800 \/ 1200 \/ 1400 \/ 1600 \/ 1800 mm post heights\u003c\/li\u003e\n\u003cli\u003e2 in. x 2 in. x 0.2 in. section (50 x 50 x 5 mm), the extra-strong wall\u003c\/li\u003e\n\u003cli\u003e345 MPa yield strength steel\u003c\/li\u003e\n\u003cli\u003eRubber cap included, so the exposed top does not mark a slab or a hand\u003c\/li\u003e\n\u003cli\u003eNet weight 6.5 kg (14.3 lb)\u003c\/li\u003e\n\u003cli\u003eAardwolf now prints this part as ASRP1600; ASR09 is the legacy code for the same post\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne slab rack post with rubber cap\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eShops extending, repairing or reconfiguring an existing slab or remnant rack, where a single upright needs replacing or an extra bay needs adding.\u003c\/p\u003e\n\u003cp\u003eDo not buy this expecting a rack. It is one post: Aardwolf sells complete rack kits and multi-pole sets separately, and if you need storage rather than a spare part the Aardwolf Remnant Rack arrives with its posts included and a 2,204 lb working load limit. If you are setting posts on a floor rather than into an existing rail, the Aardwolf Steel Post Base fits posts in the 63 in. to 70.9 in. range and sets a 4-degree lean so slabs rest back against the upright instead of standing dead vertical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow tall is the Aardwolf Slab Rack Post?\u003c\/h4\u003e\n\u003cp\u003e63 in. (1600 mm). Aardwolf builds this post family in 800, 1200, 1400, 1600 and 1800 mm heights.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the post made of?\u003c\/h4\u003e\n\u003cp\u003e50 x 50 mm square steel tube with a 5 mm wall - 2 in. x 2 in. x 0.2 in. - in steel with a 345 MPa yield strength.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs a cap included?\u003c\/h4\u003e\n\u003cp\u003eYes. A rubber cap is supplied with the post.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs this a complete rack?\u003c\/h4\u003e\n\u003cp\u003eNo. This part is a single slab rack post. Complete racks and multi-post kits are separate items.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhy does the part number differ from Aardwolf's?\u003c\/h4\u003e\n\u003cp\u003eAardwolf has renumbered this post from ASR09 to ASRP1600. Both codes refer to the same 50 x 50 x 5 mm, 1600 mm post.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170127933660,"sku":"AAW ASR09","price":91.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/bf806305-28c8-4c81-9eaa-1a052a6771b5.png?v=1786055370"},{"product_id":"aardwolf-carton-box-lifter-cbl680","title":"Aardwolf Carton Box Lifter – 2-1\/2 in. to 26-3\/4 in. Grip, 220 lb Working Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Carton Box Lifter CBL-680 is a gravity-latching clamp for carton boxes and other box-shaped loads, gripping from 2-1\/2 in. to 26-3\/4 in. with a 220 lb working load limit.\u003c\/p\u003e\n\u003cp\u003eThe latch is gravity-controlled, so the clamp grips as the load is taken up and releases when it is set down, and the gripping pads are interchangeable, which is how the same frame handles drums as well as cartons.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e220 lb working load limit (100 kg) - a light-duty warehouse rating, not a stone rating\u003c\/li\u003e\n\u003cli\u003eGrip range 2-1\/2 in. to 26-3\/4 in.\u003c\/li\u003e\n\u003cli\u003eGravity-controlled locking latch: it grips on lift, releases on set-down\u003c\/li\u003e\n\u003cli\u003eInterchangeable gripping pads for different load types, including drums\u003c\/li\u003e\n\u003cli\u003eNet weight 55 lb, gross 66 lb; packaging 24-3\/8 in. x 6-1\/2 in. x 33-1\/8 in.\u003c\/li\u003e\n\u003cli\u003eDesigned to run under a light load crane\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne carton box lifter\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eWarehouses, shipping departments and manufacturing lines running a light load crane or jib, where cartons and drums are moved repeatedly and a hands-free grip saves the handling.\u003c\/p\u003e\n\u003cp\u003eThe 220 lb limit is the whole story here and it is easy to misread on a page full of Aardwolf stone equipment. This lifter must not be used on stone: a single 3 cm slab is far beyond it. Slab work needs a rated slab lifter such as the Aardwolf Lifter 50 at 2,646 lb, and block work needs a horizontal clamp such as the Aardwolf Horizontal Stone Lifting Clamp AHLC-1370 at 3,307 lb. Note also that this is a clamp, not a lifting point: the crane, hoist or jib it hangs from is separate, and a fitting such as the Aardwolf Swivel Hook is what converts a tine into one.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit of the Aardwolf Carton Box Lifter CBL-680?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes a 220 lb (100 kg) working load limit for the CBL680 carton box lifter. It is a light-duty tool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the grip range?\u003c\/h4\u003e\n\u003cp\u003e2-1\/2 in. to 26-3\/4 in., which covers small parcels through large cartons.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan it lift stone slabs?\u003c\/h4\u003e\n\u003cp\u003eNo. A 220 lb working load limit is far below the weight of a stone slab; slab handling requires a purpose-built slab lifter with a rating in the thousands of pounds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan it handle drums as well as boxes?\u003c\/h4\u003e\n\u003cp\u003eThe gripping pads are interchangeable, which is what allows the lifter to be set up for drum handling as well as cartons.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow does it grip and release?\u003c\/h4\u003e\n\u003cp\u003eA gravity-controlled locking latch closes the clamp as the load is lifted and releases it when the load is grounded, so the operator does not have to work the clamp by hand.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170128294108,"sku":"AAW CBL-680","price":1227.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/12e71af1-1e72-4e60-ba0d-a80b51c76f81.webp?v=1786055371"},{"product_id":"suction-cup-professional","title":"A. Bottini Plastic Suction Cup – 5 in., 40 lb. Capacity","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe A. Bottini Plastic Suction Cup is a 5 in. hand suction cup used to lift and position tile and cut pieces, with an approximate lifting capacity of 40 lb. (18 kg) per BOE.\u003c\/p\u003e\n    \u003cp\u003eA rated capacity is an approximate figure on a clean, flat, non-porous surface. It is not a slab-handling lifter and it is not rated for overhead or two-man slab work — for that, use a purpose-built vacuum lifter. The other size stocked is the 3 in. A. Bottini Small Suction Cup, rated at 25 lb. (11 kg).\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e5 in. cup\u003c\/li\u003e\n      \u003cli\u003eBOE: approximately 40 lb. (18 kg) lifting capacity\u003c\/li\u003e\n      \u003cli\u003eHand suction cup\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eTile and stone installers lifting and positioning tile, setting a cut piece, and pulling an access panel or a lid — small handling, not slab handling.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch4\u003eHow much will it lift?\u003c\/h4\u003e\n      \u003cp\u003eBOE publishes an approximate lifting capacity of 40 lb. (18 kg).\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch4\u003eWhat size is the cup?\u003c\/h4\u003e\n      \u003cp\u003eThe suction cup is 5 in.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch4\u003eCan I lift a slab with it?\u003c\/h4\u003e\n      \u003cp\u003eNo. This is a hand cup for small handling. Slab work needs a purpose-built vacuum lifter with a rated, tested seal.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch4\u003eWhat affects the grip?\u003c\/h4\u003e\n      \u003cp\u003eA suction cup holds on a clean, flat, non-porous surface. Dust, texture, porosity and moisture all reduce the seal, which is why the published capacity is an approximation.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"A. Bottini (Primo Tools)","offers":[{"title":"Default Title","offer_id":52170129309916,"sku":"ABO SUC-PRO","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/6fb53813-94f7-4a26-8775-0c9756863dbb.jpg?v=1786055376"},{"product_id":"aardwolf-horizontal-stone-lifting-clamp-ahlc-1370","title":"Aardwolf Horizontal Stone Lifting Clamp – 11 in. to 54 in. Grip, 3,307 lb Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Horizontal Stone Lifting Clamp AHLC-1370 is a crane- and forklift-boom-mounted clamp that grips concrete blocks, natural stone and slab material horizontally across an 11 in. to 54 in. range, with a 3,307 lb working load limit.\u003c\/p\u003e\n\u003cp\u003eThe number in the model code is the maximum grip in millimetres: 1370 mm is the 54 in. figure, and the family steps through AHLC-730, AHLC-1050, AHLC-1370 and AHLC-2010.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrip range 11 in. to 54 in. (280-1370 mm), manufacturer-published on the Horizontal Stone Lifting Clamps line page\u003c\/li\u003e\n\u003cli\u003e3,307 lb working load limit (1,500 kg)\u003c\/li\u003e\n\u003cli\u003eNet weight 273 lb - the clamp itself is a suspended-load item and hangs from a crane hook or forklift boom\u003c\/li\u003e\n\u003cli\u003eSits in the middle of the AHLC family: wider than the AHLC-730 and AHLC-1050, below the 79 in. AHLC-2010-4T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne horizontal stone lifting clamp\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eStone yards, block yards and precast operations that already run a crane or a boom-equipped forklift and need to pick loads flat rather than on edge.\u003c\/p\u003e\n\u003cp\u003eIt is the wrong tool if you do not have lifting plant. At 273 lb it is not carried, positioned or operated by hand, and it will not close below 11 in., so it cannot pick a single 2 cm or 3 cm slab. For hand-carrying sheet material two people use the Aardwolf Sheet Material Carry Clamp, which grips 0 to 2 in., is rated 441 lb and is sold as a pair. For lifting individual slabs vertically off a rack with a crane, the Aardwolf Lifter 50 grips 3\/8 in. to 2 in. To rotate a load once it is in the air, the Aardwolf Lifter Twister hangs between the hook and the clamp; check its 2,646 lb rating against your load before you use it with this clamp.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit of the Aardwolf Horizontal Stone Lifting Clamp AHLC-1370?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes a 3,307 lb (1,500 kg) working load limit for the AHLC-1370 horizontal stone lifting clamp.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat thickness of material will it grip?\u003c\/h4\u003e\n\u003cp\u003eThe AHLC-1370 grips from 11 in. to 54 in. (280-1370 mm) across, so it is a clamp for blocks and stacked bundles rather than for a single slab.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan it be used by hand?\u003c\/h4\u003e\n\u003cp\u003eNo. The clamp weighs 273 lb and is designed to hang from a crane hook or a forklift boom.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat does the 1370 in the model number mean?\u003c\/h4\u003e\n\u003cp\u003eIn Aardwolf's horizontal stone lifting clamp family the model number is the maximum grip in millimetres, so 1370 corresponds to the 54 in. upper limit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow does it differ from the AHLC-2010-4T?\u003c\/h4\u003e\n\u003cp\u003eThe AHLC-2010-4T is the larger model: 12 in. to 79 in. grip and an 8,818 lb working load limit, against 11 in. to 54 in. and 3,307 lb here.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170132848860,"sku":"AAW AHLC-1370","price":3775.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/a930e728-d87c-4c7d-8cff-a4e1805c6617.jpg?v=1786056360"},{"product_id":"pro-cart-at1","title":"Omni Cubed Pro-Cart – 60 in. L x 21 in. W x 21 in. H, 750 lb Capacity","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Pro-Cart AT1 is a 60 in. L x 21 in. W x 21 in. H all-terrain slab cart rated at 750 lb, with integrated clamps that hold the load upright and 8 in. non-marking flat-free tires. It weighs 48 lb and has 14.5 in. of ground clearance, so it rolls over gravel, thresholds and site debris rather than being stopped by them.\u003c\/p\u003e\n    \u003cp\u003eThe integrated clamps open to 73 mm (2.88 in.), which is what secures a slab or finished top to the cart instead of relying on a strap. This is the base all-terrain model in the line.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e750 lb capacity, 48 lb cart\u003c\/li\u003e\n\u003cli\u003e60 in. L x 21 in. W x 21 in. H with a 60 in. support rail\u003c\/li\u003e\n\u003cli\u003eIntegrated clamps with a 73 mm (2.88 in.) maximum opening\u003c\/li\u003e\n\u003cli\u003e8 in. non-marking, flat-free tires\u003c\/li\u003e\n\u003cli\u003e14.5 in. ground clearance for gravel, thresholds and site debris\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\u003cli\u003eOne Pro-Cart AT1\u003c\/li\u003e\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eFabrication shops and install crews moving slabs and finished tops across yards, driveways and unfinished sites where a flat-floor trolley bogs down. Crews that regularly negotiate stairs, or that carry over 750 lb, should step up to the higher-capacity model.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the capacity of the Pro-Cart AT1?\u003c\/h4\u003e\n\u003cp\u003eThe Omni Cubed Pro-Cart AT1 is rated at 750 lb and the cart itself weighs 48 lb.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow thick a piece will the clamps take?\u003c\/h4\u003e\n\u003cp\u003eThe integrated clamps open to a maximum of 73 mm (2.88 in.).\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan it handle stairs?\u003c\/h4\u003e\n\u003cp\u003eIts 14.5 in. ground clearance and 8 in. flat-free tires suit rough ground and thresholds. For stair treads specifically, the Omni Cubed Pro-Cart with 1,000 lb capacity adds an adjustable wheelbase to match tread depth and carries the higher rating.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat size are the tires?\u003c\/h4\u003e\n\u003cp\u003e8 in. non-marking, flat-free tires - there is no tube to puncture on a site.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs a dolly a better option for tight interiors?\u003c\/h4\u003e\n\u003cp\u003eFor low doorway clearance and moving a top the last few feet indoors, a low-profile slab dolly such as the Omni Cubed Pro-Dolly is easier to work with than a full-height cart.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170133569756,"sku":"OCI PCAT1-14","price":950.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/8918ea38-2a9b-4cda-a54e-7f05fc671a63.jpg?v=1786056366"},{"product_id":"nano-stealth-seam-setter-auto","title":"Omni Cubed Stealth Seamer Seam Setter – 5 in. Cups, Auto","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Nano Stealth Seamer Auto is a vacuum seam setter with 5 in. cups, sold as a pair of units with a vacuum pump and a storage case, for joining and leveling countertop sections. The smaller cups are the point of the model: they land on narrow pieces and reach into tight spaces where an 8 in. cup will not fit.\u003c\/p\u003e\n    \u003cp\u003eIts open frame and high-clearance driveshaft leave the joint reachable while the tool is loaded, so epoxy can be applied and cleaned off without unloading the seamer. Auto means a pump holds the vacuum in the cups instead of hand pumping.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e5 in. vacuum cups for small pieces and tight spaces\u003c\/li\u003e\n\u003cli\u003eAuto operation - vacuum pump supplies and holds the vacuum, with AC and battery adapters supplied\u003c\/li\u003e\n\u003cli\u003eWide-open frame and high-clearance driveshaft keep the whole seam accessible during use\u003c\/li\u003e\n\u003cli\u003eNon-marking synthetic rubber cups\u003c\/li\u003e\n\u003cli\u003eShips as two units, so both sides of the seam are set with one purchase\u003c\/li\u003e\n\u003cli\u003eStorage case included\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eTwo Nano Stealth Seamer units\u003c\/li\u003e\n\u003cli\u003eFour cup covers\u003c\/li\u003e\n\u003cli\u003eVacuum pump with AC and battery adapters\u003c\/li\u003e\n\u003cli\u003eStorage case\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eFabricators and installers working small returns, vanity tops, backsplash sections and seams in confined runs where a large cup has nowhere to sit. Shops joining full-size kitchen tops and flattening warped material will get more leveling authority from the 8 in. cup models.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow many units come in the box?\u003c\/h4\u003e\n\u003cp\u003eThe Omni Cubed Nano Stealth Seamer Auto ships as two seam setter units with four cup covers, a vacuum pump with AC and battery adapters, and a storage case.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhy choose 5 in. cups over 8 in. cups?\u003c\/h4\u003e\n\u003cp\u003e5 in. cups fit on narrow pieces and into tight spaces where an 8 in. cup has no room to seal. On a full-size kitchen top with warp to pull out, the larger 8 in. cup models give more leverage - the Omni Cubed Stealth Seamer Seam Setter with 8 in. cups, Auto is that tool.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat does Auto mean on a Stealth Seamer?\u003c\/h4\u003e\n\u003cp\u003eAuto means the vacuum in the cups is supplied and maintained by a vacuum pump rather than being charged by hand, and the Auto kits ship with that pump and a case.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan epoxy be applied with the tool in place?\u003c\/h4\u003e\n\u003cp\u003eYes. The open frame and high-clearance driveshaft leave the seam reachable while the tool is loaded, so adhesive can be worked and cleaned without removing the seamer.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs this the tool for a perpendicular joint?\u003c\/h4\u003e\n\u003cp\u003eNo - for mitered aprons, butt-joints and compound corners, the 90-degree Stealth Seamer model is the one designed to pull a perpendicular seam.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170133962972,"sku":"OCI 5148-SNA-17","price":925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/aa22e731-15c6-467b-88d7-ae3569bc3feb.jpg?v=1786056368"},{"product_id":"aardwolf-remnant-rack","title":"Aardwolf Remnant Rack – 118-1\/8 in. Long, 2,204 lb Working Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Remnant Rack is a hot-dipped galvanized floor rack with two 118-1\/8 in. base rails, 29-1\/8 in. high, rated to a 2,204 lb working load limit and supplied with its posts included.\u003c\/p\u003e\n\u003cp\u003ePosts included is the fact worth reading twice, because Aardwolf sells slab rack posts individually as well. Each base rail carries 15 open pole holes, so the spacing between posts is set by where you place them rather than being fixed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2,204 lb working load limit (1,000 kg)\u003c\/li\u003e\n\u003cli\u003eTwo base rails 118-1\/8 in. long (3 m), 29-1\/8 in. high (740 mm)\u003c\/li\u003e\n\u003cli\u003e15 open pole holes per side, so remnant slots can be spaced to the pieces you actually keep\u003c\/li\u003e\n\u003cli\u003eHot-dipped galvanized, which is why it survives a wet yard or an outdoor storage bay\u003c\/li\u003e\n\u003cli\u003ePosts included - Aardwolf's own name for it is Remnant Rack 3m (Posts Included)\u003c\/li\u003e\n\u003cli\u003eNet weight 184.7 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne remnant rack, posts included\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eFabrication shops storing off-cuts and remnants upright where they can be seen and pulled, instead of stacked flat where the piece you want is always at the bottom.\u003c\/p\u003e\n\u003cp\u003eThe 2,204 lb limit is the constraint: this is a rack for remnants and part slabs, not for full slab bundles, and it should not be loaded like an A-frame. Full slabs going to site belong on the Aardwolf Transport Frame TF2000PC, which carries 2,756 lb per side and 5,511 lb total. If you already own a rack and only need to replace or add uprights, the Aardwolf Slab Rack Posts are sold separately at 63 in. high, and the Aardwolf Steel Post Base sets a 4-degree lean for posts in that height class.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit of the Aardwolf Remnant Rack?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes a 2,204 lb (1,000 kg) working load limit for the ARR01 remnant rack.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eAre the posts included?\u003c\/h4\u003e\n\u003cp\u003eYes. Aardwolf's own product name for this rack is Remnant Rack 3m (Posts Included), and the sourced record confirms the rack ships with its posts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow long is the rack?\u003c\/h4\u003e\n\u003cp\u003eThe base rails are 118-1\/8 in. long (3 m) and stand 29-1\/8 in. high (740 mm). A distributor description of '10 ft long' is a rounding of the same 3 m measurement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow many post positions does it have?\u003c\/h4\u003e\n\u003cp\u003eThere are 15 open pole holes per side, so posts can be set at whatever spacing suits the remnants being stored.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWill it stand up to an outdoor yard?\u003c\/h4\u003e\n\u003cp\u003eThe rack is hot-dipped galvanized, a finish chosen for corrosion resistance in wet and outdoor storage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170136944860,"sku":"AAW ARR01","price":679.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/c78c66db-f42e-4afe-bb59-896b7898c3e7.jpg?v=1786056381"},{"product_id":"pistol-grip-xl-suction-cup","title":"Pistol Grip Suction Cup","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe RTC Pistol Grip Suction Cup in its XL designation is a hand-held vacuum lifting cup with a pistol-grip lever, used to lift and position tile by hand.\u003c\/p\u003e\n    \u003cp\u003eIt sits outside RTC's current published range. The catalogue RTC publishes today runs a single 2-3\/4 in. (70 mm) cup rated up to 33 lb (15 kg) and a twin-cup model with its own rating, and this part number matches neither, so no cup diameter and no lift rating are stated on this page.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eHand-held pistol-grip vacuum cup for lifting and positioning tile\u003c\/li\u003e\n\u003cli\u003eSeals on smooth, non-porous surfaces such as glazed tile and polished stone\u003c\/li\u003e\n\u003cli\u003eCup diameter and lift rating are not published by the manufacturer for this part number\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eTile setters who already run this cup and want a replacement. Anyone choosing a lifting cup on a stated capacity should buy a model whose rating the manufacturer publishes.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhich pistol grip cup has a published lift rating?\u003c\/h4\u003e\n\u003cp\u003eRTC publishes up to 33 lb (15 kg) on a 2-3\/4 in. (70 mm) cup for its single-cup Pistol Grip Suction Cup. Where a stated capacity matters, choose a cup whose manufacturer publishes a rating for that exact model.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is a suction cup like this used for?\u003c\/h4\u003e\n\u003cp\u003eSetting, lifting and positioning individual tiles by hand, and pulling a tile back up while the mortar is still workable. It is a positioning tool, not a rigging or hoisting device.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat surfaces will a vacuum cup hold on?\u003c\/h4\u003e\n\u003cp\u003eSmooth, clean, non-porous faces such as glazed tile and polished stone. Textured, structured or porous surfaces leak and the cup can release without warning.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat should I use for a heavier lift?\u003c\/h4\u003e\n\u003cp\u003eA cup with a larger pad and a published rating — the A. Bottini Plastic Suction Cup at 5 in. and 40 lb, or the Wood's Powr-Grip 8 in. flat vacuum cup at 125 lb.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Russo Trading Company","offers":[{"title":"Default Title","offer_id":52170137469148,"sku":"RTC STPGXL","price":14.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/a6f1545d-c91d-4e60-b34f-3d6bb888d00a.jpg?v=1786056386"},{"product_id":"sink-hole-saver-edge-v3-4ft","title":"Omni Cubed Sink Hole Saver Edge V3 Reinforcement Rail – 4 ft.","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Sink Hole Saver Edge v3 in the 4 ft. length is a 48 in. x 3.5 in. x 6 in. reinforcement rail that clamps to the edge of a piece to stop it flexing or snapping at a cutout during fabrication, transport and install. Its mechanical clamps take material from 0.7 in. to 2.1 in. (18-53 mm) thick.\u003c\/p\u003e\n    \u003cp\u003eThis is the mechanical-clamp version of the Sink Hole Saver: the clamps grip the edge of the material, so there is no pump, no battery and no vacuum cup to seal. That also sets its limit - it needs an accessible edge to clamp to.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e48 in. rail, 3.5 in. x 6 in. section, sized for a single cutout or a run of backsplash\u003c\/li\u003e\n\u003cli\u003eMechanical edge clamps slide along the rail so they can be set either side of the weak point\u003c\/li\u003e\n\u003cli\u003e0.7-2.1 in. (18-53 mm) clamping range\u003c\/li\u003e\n\u003cli\u003eNo pump, battery or vacuum cups - nothing to charge before a job\u003c\/li\u003e\n\u003cli\u003eSame rail profile and clamping range as the 6 ft. and 8 ft. models in the line\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\u003cli\u003eOne 48 in. reinforcement rail with sliding mechanical clamps\u003c\/li\u003e\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eFabricators and installers moving countertops with sink cutouts, cooktop cutouts or long backsplashes, where the piece is most likely to break at the narrowest section. It also suits shops that want reinforcement without a vacuum pump to charge or cups to seal.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the clamping range of the Sink Hole Saver Edge v3?\u003c\/h4\u003e\n\u003cp\u003eThe Omni Cubed Sink Hole Saver Edge v3 clamps material from 0.7 in. to 2.1 in. (18-53 mm) thick.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow long is the 4 ft. model?\u003c\/h4\u003e\n\u003cp\u003eThe rail is 48 in. long, with a 3.5 in. x 6 in. section.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes this version use vacuum cups?\u003c\/h4\u003e\n\u003cp\u003eNo. The Edge v3 is the mechanical version and clamps the edge of the material. The vacuum-cup versions in the same family are surface-mounted instead, which is what to use when the edge is not accessible - for example the Omni Cubed Sink Hole Saver V6 in the 7 ft. Auto configuration.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhich length should I buy?\u003c\/h4\u003e\n\u003cp\u003eMatch the rail to the span you need to support: the Sink Hole Saver Edge v3 is made in 4 ft., 6 ft. and 8 ft. rails, all with the same 0.7-2.1 in. clamping range.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170137534684,"sku":"OCI 4101-SHSE-17","price":345.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/a04fa86d-0fae-46cf-8bbd-4211d787ea0a.jpg?v=1786056386"},{"product_id":"sink-hole-saver-manual-4ft","title":"Omni Cubed Sink Hole Saver – 4 ft., Manual Vacuum Reinforcement Rail","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Sink Hole Saver in this 4 ft. Manual configuration is a vacuum reinforcement rail whose cups are charged by hand rather than by a pump, used to support a cutout while a piece is lifted, moved and set. It is the Manual member of an earlier generation of the vacuum Sink Hole Saver line and is no longer listed in the current Omni Cubed catalogue.\u003c\/p\u003e\n    \u003cp\u003eApart from the length and the Manual designation, Omni Cubed publishes no specification for this part number and no distributor listing could be found, so no further figures are given here. The current-generation replacement is a different product and its specifications do not transfer.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eVacuum reinforcement rail, surface-mounted to the face of the material\u003c\/li\u003e\n\u003cli\u003eManual configuration - cups charged by hand, no pump required\u003c\/li\u003e\n\u003cli\u003e4 ft. length\u003c\/li\u003e\n\u003cli\u003eEarlier-generation part number, superseded in the current Omni Cubed line\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eShops matching or replacing a 4 ft. manual vacuum Sink Hole Saver already in service. A first-time buyer is better served by a current-generation rail, which is supported and fully specified.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs this part number still made?\u003c\/h4\u003e\n\u003cp\u003eNo. It is not listed in the current Omni Cubed catalogue and appears to have been superseded by the v6-generation vacuum Sink Hole Savers.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes the Manual version need a pump or a battery?\u003c\/h4\u003e\n\u003cp\u003eNo. On an Omni Cubed manual vacuum Sink Hole Saver the cups are charged by hand and re-pumped as needed, so there is nothing to charge and no pump to carry.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat cups, capacity and weight does it have?\u003c\/h4\u003e\n\u003cp\u003eThose figures are not published for this part number and are not shared with the current-generation rails, which are different products. Ask before ordering if the specification matters for the job.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the current equivalent?\u003c\/h4\u003e\n\u003cp\u003eThis part number appears to have been superseded by the 4 ft. Sink Hole Saver v6 Manual, SHS-4M-20 - an identification inferred from the part numbering and the year codes rather than stated by Omni Cubed. We do not stock SHS-4M-20, so there is no same-length 4 ft. manual replacement in our catalogue.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170138583260,"sku":"OCI 4149-SHSM-17","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/2d21d1ac-9dcd-4e31-a296-c10c8fccf0b8.jpg?v=1786056391"},{"product_id":"carry-clamp-mega-jaw-pair","title":"Omni Cubed Mega-Jaw Carry Clamp – 6-61 mm Jaw Opening, 500 lb per Pair","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eOmni Cubed Mega-Jaw Carry Clamps are hand carry clamps sold as a pair, with a 6-61 mm (0.24-2.4 in.) jaw opening and a published capacity of 500 lb per pair. Aluminum arms carry non-marking rubber grips, and the gravity-assist action tightens the grip as the load hangs on it.\u003c\/p\u003e\n    \u003cp\u003eThe pair is the selling unit and the rated figure is stated for the pair, not per clamp. Availability of this product is limited by the manufacturer to the USA, Canada and Europe.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e6-61 mm (0.24-2.4 in.) jaw opening - takes thin material up to thick built-up and cast tops\u003c\/li\u003e\n\u003cli\u003e500 lb capacity per pair, as published by Omni Cubed\u003c\/li\u003e\n\u003cli\u003eGravity-assist mechanism: the grip tightens as load increases\u003c\/li\u003e\n\u003cli\u003eAluminum arms with non-marking rubber grips\u003c\/li\u003e\n\u003cli\u003eGrab-and-go: nothing to pump, charge or seal\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\u003cli\u003ePair of Mega-Jaw carry clamps (2 clamps)\u003c\/li\u003e\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eTwo-person crews carrying slabs and finished tops in and out of a shop, a truck or a job site, where a vacuum cup will not seal on a textured or dusty face. The jaw range also suits thick cast and built-up material that a thin-grip sheet clamp cannot take.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the capacity of the Mega-Jaw Carry Clamp?\u003c\/h4\u003e\n\u003cp\u003eOmni Cubed publishes 500 lb per pair. The clamps are sold and rated as a pair, so that figure applies to the two clamps used together.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat thickness of material do they grip?\u003c\/h4\u003e\n\u003cp\u003eThe jaw opening is 6-61 mm (0.24-2.4 in.).\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWill they mark a polished face?\u003c\/h4\u003e\n\u003cp\u003eThe aluminum arms carry non-marking rubber grips, which is what keeps the clamp off the finished surface.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDo these come with a case?\u003c\/h4\u003e\n\u003cp\u003eThis part number is the bare pair. Some distributors list a separate set-with-case configuration; the case is not included here.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat should I use for carrying thin sheet material?\u003c\/h4\u003e\n\u003cp\u003eFor thin sheet goods a purpose-made sheet clamp is the better grip - the Aardwolf Sheet Material Carry Clamp covers a 0 to 2 in. grip range and publishes a 441 lb working load limit.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eAre they for moving material across a site?\u003c\/h4\u003e\n\u003cp\u003eCarry clamps are for lifting and carrying by hand. For moving a heavy top any distance over rough ground or up stairs, a slab cart such as the Omni Cubed Pro-Cart with 1,000 lb capacity does the work instead.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170139009244,"sku":"OCI MJ-126-15","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/562fa714-1161-425e-bb18-211c93360342.jpg?v=1786056394"},{"product_id":"aardwolf-lifter-50-auto-w-roller","title":"Aardwolf Lifter 50 Auto – 3\/8 in. to 2 in. Grip, Auto Lock, 2,646 lb Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Lifter 50 Auto is an automatic slab lifter with a 3\/8 in. to 2 in. grip range and a 2,646 lb working load limit, which clamps under the weight of the load as it lifts and releases itself when the slab is set down.\u003c\/p\u003e\n\u003cp\u003eIt is the auto-lock member of the pair: the same jaw range and the same rating as the manual AL50, with a gravity-controlled mechanism that removes the release step from every cycle. Side rollers are standard equipment on this model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrip range 3\/8 in. to 2 in. (10-50 mm) - 1 cm through 5 cm material\u003c\/li\u003e\n\u003cli\u003e2,646 lb working load limit (1,200 kg)\u003c\/li\u003e\n\u003cli\u003eGravity-controlled automatic lock and release: it grips on lift and lets go when the load is grounded\u003c\/li\u003e\n\u003cli\u003eSide rollers fitted as standard\u003c\/li\u003e\n\u003cli\u003ePart of Aardwolf's Auto Lock Series, AL30A through AL75A, where the model number is the maximum grip in millimetres\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne slab lifter\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eHigh-cycle slab yards and shops where an operator is loading and unloading racks all day and a manual release step costs time on every slab.\u003c\/p\u003e\n\u003cp\u003eAutomatic release is not always what you want. If a slab has to be held while it is repositioned, or set down and then lifted again without re-seating the clamp, the manual Aardwolf Lifter 50 is the safer choice because it will not let go on contact. The jaw range is also the hard limit here: nothing thinner than 3\/8 in. (10 mm) can be gripped, so thin and large-format panels need the Aardwolf Lifter 30 Wide Jaw. If the slab has to be turned in the air after it is picked, the Aardwolf Lifter Twister hangs between the hook and this lifter and rotates the load 360 degrees at a matching 2,646 lb rating.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit of the Aardwolf Lifter 50 Auto?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes a 2,646 lb (1,200 kg) working load limit for the AL50A automatic slab lifter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat slab thickness will it grip?\u003c\/h4\u003e\n\u003cp\u003e3\/8 in. to 2 in. (10-50 mm), the same range as the manual AL50.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow does the automatic locking work?\u003c\/h4\u003e\n\u003cp\u003eThe mechanism is gravity-controlled: it closes and grips as the load is taken up and releases automatically once the load is set down and the lifting force is removed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhen would a manual lifter be better?\u003c\/h4\u003e\n\u003cp\u003eWhen a load has to stay clamped after it is grounded - a manual-unlock lifter holds its grip until an operator releases it, whereas an automatic one lets go on set-down.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eAre side rollers included?\u003c\/h4\u003e\n\u003cp\u003eYes. Aardwolf's AL50A page lists side rollers as a standard feature, so the -R sales suffix describes the standard product.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170141597916,"sku":"AAW AL50A-R","price":1138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/0e74b8b8-904c-460b-b0a7-4e624dbb2133.jpg?v=1786056407"},{"product_id":"woods-mrta-lifter-series-quadra-tilt-rotator-1200-lbs","title":"Wood's Powr-Grip Quadra-Tilt Rotator Vacuum Lifter – MRTA810TDC3, 1200 lb Capacity","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eThe Wood's Powr-Grip Quadra-Tilt Rotator Vacuum Lifter (Model MRTA810TDC3, Stock #98750) is a battery-powered vacuum lifter rated to 1200 lb [545 kg], using eight 10 in. vacuum pads for flat, textured surfaces.\u003c\/p\u003e\n  \u003ch3\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e1200 lb [545 kg] rated load capacity\u003c\/li\u003e\n    \u003cli\u003eEight 10 in. diameter vacuum pads with replaceable sealing rings\u003c\/li\u003e\n    \u003cli\u003e12-volt DC battery-powered dual vacuum system (Wood's Powr-Grip's DC3 system: two completely independent vacuum circuits) with Intelli-Grip monitoring of vacuum and power — not air-powered\u003c\/li\u003e\n    \u003cli\u003eManual 360° edgewise rotation that locks at each quarter turn\u003c\/li\u003e\n    \u003cli\u003eAssisted-manual tilt, 90° between upright and flat, via Wood's Powr-Grip's Quadra-Tilt linkage — no powered tilt actuator required\u003c\/li\u003e\n    \u003cli\u003eAdjustable pad spread: 11-1\/2 in. to 58 in. wide, 46 in. to 104 in. long\u003c\/li\u003e\n    \u003cli\u003eRated for flat, textured surfaces such as IMPs (insulated metal panels) and similar construction\/installation materials (Wood's Powr-Grip's own Ideal Uses)\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eWho Is This For\u003c\/h3\u003e\n  \u003cp\u003eInstallation and construction crews handling flat, textured panel materials by hand-guided lift, where a single operator needs to rotate and tilt loads up to 1200 lb without a powered tilt actuator.\u003c\/p\u003e\n  \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat is the load capacity?\u003c\/h4\u003e\n    \u003cp\u003e1200 lb [545 kg].\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eHow many pads does it use?\u003c\/h4\u003e\n    \u003cp\u003eEight 10 in. diameter pads with replaceable sealing rings.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eHow is it powered?\u003c\/h4\u003e\n    \u003cp\u003eA 12-volt DC battery system drives Wood's Powr-Grip's DC3 dual independent vacuum circuits; it is not air-powered.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eDoes it rotate and tilt?\u003c\/h4\u003e\n    \u003cp\u003eYes — manual 360° edgewise rotation that locks every quarter turn, plus Wood's Powr-Grip's Quadra-Tilt assisted-manual tilt of 90° between upright and flat.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat surfaces is it rated for?\u003c\/h4\u003e\n    \u003cp\u003eFlat, textured surfaces such as IMPs and similar construction materials, per Wood's Powr-Grip.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Woods Powr Grip","offers":[{"title":"Default Title","offer_id":52170143989980,"sku":"WOO 98750","price":10056.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/d73e08cd-dc67-4555-b2b6-5f7610b9c2c4.jpg?v=1786056415"},{"product_id":"7-sink-hole-saver-v6","title":"Omni Cubed Sink Hole Saver V6 – 7 ft., Auto","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Sink Hole Saver v6 in 7 ft. Auto is a fixed-length 84 in. vacuum reinforcement rail carrying four 6 in. non-marking concave cups, with a rail-mounted rechargeable VMP750 pump that maintains the vacuum. The complete unit weighs 14.3 lb.\u003c\/p\u003e\n    \u003cp\u003eThe rail is fixed, not telescoping. That is the whole distinction against the Slider model in the same line: this one is a rigid 84 in. beam whose length never changes, while the Slider telescopes from 51 in. to 90 in. and has cups that slide to be repositioned around a cutout. They are two different products, not one product at two prices.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eFixed 84 in. (7 ft.) rail - rigid full length, no telescoping section\u003c\/li\u003e\n\u003cli\u003eFour 6 in. non-marking concave vacuum cups with triple sealing rings\u003c\/li\u003e\n\u003cli\u003eAuto: rail-mounted rechargeable VMP750 pump and smart charger keep the vacuum up\u003c\/li\u003e\n\u003cli\u003eSurface-mounted, so it works where there is no accessible edge to clamp\u003c\/li\u003e\n\u003cli\u003e14.3 lb complete\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eOne 84 in. rail\u003c\/li\u003e\n\u003cli\u003eFour 6 in. vacuum cups\u003c\/li\u003e\n\u003cli\u003eVMP750 rail-mounted rechargeable pump\u003c\/li\u003e\n\u003cli\u003eCharger\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eFabricators and installers repeatedly handling long tops with cutouts, where a fixed full-length rail can be left set up and lifted straight onto the next piece. Crews working a mix of short and long pieces, or who need cup positions changed often, are better served by the telescoping model.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs this the same as the Slider model?\u003c\/h4\u003e\n\u003cp\u003eNo. This is the fixed 7 ft. (84 in.) Sink Hole Saver v6 - a rigid rail of a single length. The Omni Cubed Sink Hole Saver V6 telescoping Slider is a separate product that collapses to 51 in. and extends to 90 in. and has repositionable cups.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat does Auto mean on this rail?\u003c\/h4\u003e\n\u003cp\u003eAuto means a rail-mounted rechargeable VMP750 pump maintains the vacuum in the cups, supplied with a smart charger, rather than the cups being charged by hand.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow many cups does it have, and what size?\u003c\/h4\u003e\n\u003cp\u003eFour 6 in. non-marking concave vacuum cups with triple sealing rings.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow much does it weigh?\u003c\/h4\u003e\n\u003cp\u003e14.3 lb complete.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhen should I use a vacuum rail instead of a mechanical clamp rail?\u003c\/h4\u003e\n\u003cp\u003eA vacuum rail mounts to the face of the material, so it works where the edge is inaccessible or where clamping the edge is not wanted. Where the edge is free, a mechanical rail such as the Omni Cubed Sink Hole Saver Edge v3 in 8 ft. needs no pump or charge.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170145136860,"sku":"OCI SHS-7A-20","price":1125.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/44b8ca03-2fb6-4bf2-9eeb-74f546704736.jpg?v=1786056423"},{"product_id":"suction-cup-8-inch-metal-n4950","title":"Wood's Powr-Grip Vacuum Cup – 8 in. Flat, N4950, 125 lb Capacity","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eThe Wood's Powr-Grip Vacuum Cup (Model N4950, Stock #91500) is an 8 in. metal-handle hand cup rated to lift 125 lb [57 kg] on flat, smooth, nonporous surfaces such as glass.\u003c\/p\u003e\n  \u003ch3\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e125 lb [57 kg] rated load capacity\u003c\/li\u003e\n    \u003cli\u003eMetal handle\u003c\/li\u003e\n    \u003cli\u003eRed-line vacuum-loss indicator warns of a significant pressure drop\u003c\/li\u003e\n    \u003cli\u003eSupplied with a protective carrying case\u003c\/li\u003e\n    \u003cli\u003eRated for glass and other smooth, nonporous flat surfaces (Wood's Powr-Grip's own Ideal Uses)\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eNot for Curved Surfaces\u003c\/h3\u003e\n  \u003cp\u003eWood's Powr-Grip's flat metal hand cups top out at 9 in. (Model N5450); this 8 in. N4950 is a flat-pad cup and is not built for curved or irregular surfaces. For curved or irregular nonporous surfaces, Wood's Powr-Grip makes a 10 in. concave metal hand cup, the N6450 (Wood's Powr-Grip Vacuum Cup – 10 in. Concave, N6450, 175 lb Capacity).\u003c\/p\u003e\n  \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat is the load capacity?\u003c\/h4\u003e\n    \u003cp\u003e125 lb [57 kg].\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eWhat surfaces is it rated for?\u003c\/h4\u003e\n    \u003cp\u003eFlat, smooth, nonporous surfaces such as glass — not curved or textured surfaces.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eDoes it come with a carrying case?\u003c\/h4\u003e\n    \u003cp\u003eYes, Wood's Powr-Grip supplies the N4950 with a protective carrying case.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eHow do I know if the vacuum seal is failing?\u003c\/h4\u003e\n    \u003cp\u003eA red-line indicator on the cup shows any significant loss of vacuum.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch4\u003eIs a low-marking pad version available?\u003c\/h4\u003e\n    \u003cp\u003eYes — the N4950LM (Wood's Powr-Grip Vacuum Cup – 8 in. Flat, N4950LM, Low-Marking Pad, 125 lb Capacity) uses a low-marking rubber compound at the same 125 lb rating.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Woods Powr Grip","offers":[{"title":"Default Title","offer_id":52170145988828,"sku":"WOO 91500","price":112.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/d326e9dd-c34b-46b6-a4fa-a031a3fb402e.jpg?v=1786056429"},{"product_id":"aardwolf-ratchet-seam-setter-includes-case","title":"Aardwolf Seam Setter – Manual Dual-action Ratcheting Handle","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Seam Setter CTTRSS1 is a manual vacuum seam setter with a dual-action ratcheting handle, sold as a single unit in a plastic carrying case.\u003c\/p\u003e\n\u003cp\u003eAardwolf's own name for it is the Ratchet Seam Setter, and it is the compact model in the family: it holds with two vacuum pads, pulls the joint together on the ratchet and levels it with four adjusting knobs, with no pump and no power required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManual dual-action ratcheting handle - no electricity, no compressed air, no battery\u003c\/li\u003e\n\u003cli\u003eDual vacuum pads with four leveling knobs for height alignment across the joint\u003c\/li\u003e\n\u003cli\u003eDescribed by Aardwolf as compact and suitable for use on fragile or lightweight slabs\u003c\/li\u003e\n\u003cli\u003eSold individually - one unit, not a pair\u003c\/li\u003e\n\u003cli\u003ePlastic carrying case included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne seam setter\u003c\/li\u003e\n\u003cli\u003eOne plastic carrying case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eInstallers closing and leveling countertop seams on site, particularly on thin, fragile or lightweight material where a heavier setter is more force than the slab wants.\u003c\/p\u003e\n\u003cp\u003eRead the quantity before ordering: a seam is normally pulled with two setters, one each side of the joint, and this SKU is one unit. If you need a matched pair with powered vacuum, the Aardwolf Seam Setter with the electric-powered vacuum pump ships as a set of two setters plus the pump. If you want larger vacuum cups on a manual tool, the Omni Cubed Stealth Seamer Seam Setter with 8 in. cups is a manual alternative in the catalogue. This tool sets and levels a seam; it does not lift or carry slabs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs the Aardwolf Seam Setter CTTRSS1 sold as a pair?\u003c\/h4\u003e\n\u003cp\u003eNo. Aardwolf sells the ratchet seam setter individually - one unit with a plastic carrying case. Seams are usually pulled with two setters, so check how many you need.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes it need power?\u003c\/h4\u003e\n\u003cp\u003eNo. It is a manual tool: a dual-action ratcheting handle does the pulling and there is no pump, battery or air supply.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow does it level the joint?\u003c\/h4\u003e\n\u003cp\u003eFour leveling knobs adjust the height of the pads either side of the seam, so the two pieces can be brought flush before the adhesive sets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs a case included?\u003c\/h4\u003e\n\u003cp\u003eYes. The seam setter is supplied with a plastic carrying case.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the difference between this and the electric Aardwolf seam setter?\u003c\/h4\u003e\n\u003cp\u003eThis is a single manual unit with a ratcheting handle and a case. The electric model ships as a set of two setters with an electric-powered vacuum pump and 9 in. x 7-1\/2 in. vacuum pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170147463388,"sku":"AAW CTTRSS1","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/6b2e0ab4-4f8b-4891-a0fd-da967053487b.jpg?v=1786056435"},{"product_id":"auto-lifter-plastic-cap-locking-version","title":"Aardwolf Lifter Plastic Cap and Auto Locking Latch – ALA-1718 V2","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Lifter Plastic Cap and Auto Locking Latch ALA-1718 V2 is a replacement plastic cap and automatic locking latch assembly for Aardwolf automatic slab lifters, supplied in the current V2 revision.\u003c\/p\u003e\n\u003cp\u003eIt is a spare part, not a lifting device. Nothing here lifts anything on its own: the assembly restores the auto-locking action on a lifter you already own.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement plastic cap and automatic locking latch for Aardwolf automatic slab lifters\u003c\/li\u003e\n\u003cli\u003eSupplied in the V2 revision, which is the current one\u003c\/li\u003e\n\u003cli\u003eV1 and V2 are separate revisions and are not interchangeable, so the revision marker matters when ordering\u003c\/li\u003e\n\u003cli\u003eSold as a service part rather than as a lifting tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eShops running Aardwolf automatic slab lifters that need to restore the auto-locking action after wear or damage, and that already know which revision their lifter takes.\u003c\/p\u003e\n\u003cp\u003eThis is not the product to buy if you are looking for a lifter. A buyer searching for an Aardwolf auto lifter wants the Aardwolf Lifter 50 Auto, which grips 3\/8 in. to 2 in. at a 2,646 lb working load limit, or the Aardwolf Lifter 30 Wide Jaw for thin and large-format panels. Check your lifter's revision before ordering: V1 and V2 latches do not substitute for one another, and no manufacturer fitment list is published for this part, so confirm the model it goes on before you order.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs this an Aardwolf slab lifter?\u003c\/h4\u003e\n\u003cp\u003eNo. ALA-1718 V2 is the replacement plastic cap and auto-locking latch assembly for Aardwolf automatic slab lifters. It is a spare part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat does V2 mean?\u003c\/h4\u003e\n\u003cp\u003eV2 is the revision of the cap and latch assembly. A V1 revision also exists and the two are not interchangeable, so the revision has to match the lifter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the part for?\u003c\/h4\u003e\n\u003cp\u003eIt replaces the plastic cap and automatic locking latch on an Aardwolf automatic slab lifter, which is the mechanism that locks the jaws under load and releases them at set-down.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhich lifters does it fit?\u003c\/h4\u003e\n\u003cp\u003eThe fitment list is not published by Aardwolf. Confirm the model and revision of your lifter with Aardwolf or with us before ordering, because V1 and V2 do not substitute.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170147823836,"sku":"AAW ALA-1718V2","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/f699dafb-7094-4f46-bddc-099506d068f1.jpg?v=1786056438"},{"product_id":"stealth-grip-vacuum-cups-8-inch-w-bucket-pair","title":"Omni Cubed Stealth Grip – 8 in. Cup Diameter, 125 lb Capacity per Cup, Pair","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eOmni Cubed Stealth Grip vacuum suction cups are 8 in. non-marking cups rated at 125 lb per cup, sold as a pair with cup covers and a storage bucket. They are lifting and handling cups for flat faces.\u003c\/p\u003e\n    \u003cp\u003eThe 125 lb figure Omni Cubed publishes is per cup, so it is the rating for one cup and is not doubled for the pair. Cup covers protect the non-marking cup faces, and the pair stows in the storage bucket supplied with it.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e8 in. cup diameter, 125 lb capacity per cup\u003c\/li\u003e\n\u003cli\u003eSold as a pair, so a two-hand or two-person lift is covered by one purchase\u003c\/li\u003e\n\u003cli\u003eNon-marking cups with cup covers to protect the faces in transit\u003c\/li\u003e\n\u003cli\u003eStorage bucket included\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eTwo 8 in. non-marking vacuum cups\u003c\/li\u003e\n\u003cli\u003eCup covers\u003c\/li\u003e\n\u003cli\u003eStorage bucket\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eFabricators and installers lifting, positioning and carrying flat panels and finished tops, and anyone who needs a second grip point on a piece with no edge to hold. On a piece with a cutout that needs support rather than lift, a reinforcement rail is the correct tool instead.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the capacity of these vacuum cups?\u003c\/h4\u003e\n\u003cp\u003eOmni Cubed publishes 125 lb per cup for the 8 in. Stealth Grip, and the cups are sold in pairs.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs the storage bucket included?\u003c\/h4\u003e\n\u003cp\u003eYes - the pack contains two 8 in. non-marking vacuum cups with cup covers and a storage bucket.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWill they hold a cutout together?\u003c\/h4\u003e\n\u003cp\u003eNo - suction cups lift and position, they do not reinforce. To stop a piece flexing or breaking at a sink cutout during transport, a reinforcement rail such as the Omni Cubed Sink Hole Saver Edge v3 in 6 ft. is the right tool.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs there a single-cup alternative?\u003c\/h4\u003e\n\u003cp\u003eYes. Where only one cup is needed, the Wood's Powr-Grip 8 in. flat vacuum cup, N4950, is a single cup with a 125 lb capacity.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170150478044,"sku":"OCI SGB-147-19","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/beb668ca-065e-4729-a9ab-377645cd9718.jpg?v=1786056454"},{"product_id":"aardwolf-aluminum-kitchen-installation-cart-pro-version","title":"Aardwolf Kitchen Installation Cart Pro – 1,102 lb Working Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Kitchen Installation Cart Pro is a powered aluminum-framed installation cart with a 1,102 lb working load limit that lifts and rolls a finished countertop straight onto kitchen cabinets.\u003c\/p\u003e\n\u003cp\u003eAardwolf builds the kitchen installation cart in two versions: a steel-framed standard model with a fixed table, and this Pro version with an aluminum frame and an extendable table. Both carry the same 1,102 lb limit, so the frame material, the extendable table and the taller lift range are what separate them, not capacity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1,102 lb working load limit (500 kg)\u003c\/li\u003e\n\u003cli\u003eAluminum frame - lighter to move and load onto a truck than the steel-framed standard cart\u003c\/li\u003e\n\u003cli\u003eExtendable table that takes slabs up to 86-5\/8 in. x 47-1\/4 in.\u003c\/li\u003e\n\u003cli\u003ePowered height range from 14 in. to 52-11\/16 in., which covers floor pickup through cabinet rail height\u003c\/li\u003e\n\u003cli\u003eThree powered linear actuators\u003c\/li\u003e\n\u003cli\u003eWireless remote control, so the operator can stand where they can see the fit\u003c\/li\u003e\n\u003cli\u003e24V lithium-ion battery, no site power needed\u003c\/li\u003e\n\u003cli\u003eIntegrated transfer bearings in the table surface so the top rolls sideways into position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne kitchen installation cart\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eCountertop installation crews doing kitchen sets single-handed or two-handed, where the alternative is four people lifting a finished top over base cabinets.\u003c\/p\u003e\n\u003cp\u003eIt is an installation tool, not a yard tool. It is not designed to pull slabs out of an A-frame or a rack, and it is not a crane attachment: for taking slabs off a rack the Aardwolf Lifter 50 Auto is the right tool, and for transporting slabs to site the Aardwolf Transport Frame TF2000PC does that job. If all you need is to wheel a finished top across a shop floor, this cart is heavily over-specified and the Omni Cubed Pro-Cart at 1,000 lb capacity is the sensible purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit of the Aardwolf Kitchen Installation Cart Pro?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes a 1,102 lb (500 kg) working load limit for the Pro kitchen installation cart.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the largest slab it will take?\u003c\/h4\u003e\n\u003cp\u003eThe extendable table handles slabs up to 86-5\/8 in. x 47-1\/4 in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow high does it lift?\u003c\/h4\u003e\n\u003cp\u003eThe powered height range runs from 14 in. to 52-11\/16 in., which spans floor-level pickup and standard cabinet rail height.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow is it powered?\u003c\/h4\u003e\n\u003cp\u003eThree powered linear actuators run from a 24V lithium-ion battery and are driven by a wireless remote, so no site mains supply is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the difference between the Pro cart and the standard cart?\u003c\/h4\u003e\n\u003cp\u003eThe Pro has an aluminum frame and an extendable table; the standard model is steel-framed with a fixed table. Both share the same 1,102 lb working load limit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170152116444,"sku":"AAW AKIC-PRO","price":12299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/971247e2-97f7-4b17-8119-985c23971c43.jpg?v=1786056464"},{"product_id":"transport-frame-tf2000-pc","title":"Aardwolf Transport Frame – 78-3\/4 in. Long, 5,511 lb Total Working Load Limit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Transport Frame TF2000 Powder Coated is a 78-3\/4 in. double-sided slab transport frame rated 2,756 lb per side and 5,511 lb in total, with 10-1\/2 in. of slab storage base width on each face.\u003c\/p\u003e\n\u003cp\u003ePC in the code is a finish, not a model: Aardwolf offers the TF2000 powder coated or galvanised, and this is the powder-coated version. The line is sized by frame length in millimetres, running TF2000, TF2440, TF3050 and TF3050H.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5,511 lb total working load limit, 2,756 lb per side\u003c\/li\u003e\n\u003cli\u003e78-3\/4 in. long (2000 mm)\u003c\/li\u003e\n\u003cli\u003e10-1\/2 in. of slab storage base width on each side\u003c\/li\u003e\n\u003cli\u003ePowder coated finish - the alternative Aardwolf finish on this frame is galvanised\u003c\/li\u003e\n\u003cli\u003eNet frame weight 382 lb, plus a 19 lb caster handle\u003c\/li\u003e\n\u003cli\u003ePackaging 78-3\/4 in. x 40-1\/8 in. x 16-1\/2 in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne transport frame\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eSlab suppliers, fabricators and glaziers loading full slabs for delivery and storing them upright in a yard or a shop bay between jobs.\u003c\/p\u003e\n\u003cp\u003eDo not read the total as a per-side figure: each side takes 2,756 lb, and loading one face to 5,511 lb would overload it. If your loads are heavier, or you need to lift a loaded frame onto a building with a crane, the Aardwolf Transport Frame AF2440-QP is the heavy-duty frame at a 6,614 lb working load limit. If you only need to move slabs within the shop on wheels rather than transport them, the Aardwolf Slab Buggy Double Side is the lighter, hand-pushed option at 1,653 lb total, and for storing remnants rather than full slabs the Aardwolf Remnant Rack holds 2,204 lb with its posts included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the working load limit of the Aardwolf Transport Frame TF2000?\u003c\/h4\u003e\n\u003cp\u003eAardwolf publishes 2,756 lb per side and 5,511 lb in total for the TF2000 transport frame.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eCan one side carry the full 5,511 lb?\u003c\/h4\u003e\n\u003cp\u003eNo. On a double-sided frame the total is shared between the two faces; each side is rated 2,756 lb.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat does PC mean in TF2000PC?\u003c\/h4\u003e\n\u003cp\u003ePC is the finish code for powder coated. Aardwolf offers the TF2000 in powder coated or galvanised; there is no separate TF2000PC model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow long is the frame?\u003c\/h4\u003e\n\u003cp\u003e78-3\/4 in. (2000 mm). The model number in this Aardwolf line is the frame length in millimetres.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow much slab width does each side hold?\u003c\/h4\u003e\n\u003cp\u003eThe slab storage base is 10-1\/2 in. wide on each side of the frame.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170152575196,"sku":"AAW TF2000PC","price":2253.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/7a24c67c-0a17-4b5d-ab0d-030172381cc5.jpg?v=1786056466"},{"product_id":"aardwolf-economy-fabrication-table","title":"Aardwolf Economy Fabrication Table","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Economy Fabrication Table is a flat-packed work table with a 70-7\/8 in. x 23-5\/8 in. top, a 39-1\/8 in. working height and a 440 lb working load limit, built for slab layout, fitting and finishing work in the shop or on site.\u003c\/p\u003e\n\u003cp\u003eIt ships knocked down and assembles on site, and it is narrow enough at 23-5\/8 in. to pass through a standard doorway once built.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e440 lb working load limit (200 kg) - the Economy model, and a modest rating by fabrication table standards\u003c\/li\u003e\n\u003cli\u003eTable surface 70-7\/8 in. x 23-5\/8 in. (1800 x 600 mm), overall height 39-1\/8 in. (995 mm)\u003c\/li\u003e\n\u003cli\u003eRubber padding strips along the tabletop so finished faces are not scratched by the frame\u003c\/li\u003e\n\u003cli\u003eFour wheels, two of them lockable, so the table rolls and then stays put\u003c\/li\u003e\n\u003cli\u003eNet weight 95 lb, gross 106 lb - one person can reposition it empty\u003c\/li\u003e\n\u003cli\u003eShips flat-packed, which is why it costs what it does\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"whats-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOne Economy Fabrication Table, flat-packed for assembly\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eSmall shops, installers and mobile fabricators who need a second work surface that can be wheeled out of the way, carried through a door and set up on a job site.\u003c\/p\u003e\n\u003cp\u003eRead the 440 lb limit before you buy. It is a layout and finishing table, not a slab handling deck: a full 3 cm slab is well beyond it, and it must not be used as a rack or as support under a bridge saw cut. For rolling heavy finished tops around a shop, the Omni Cubed Pro-Cart at 1,000 lb capacity is the right class of tool, and for moving raw slabs the Aardwolf Slab Buggy Double Side carries 1,653 lb across two sides. For dead-flat support of individual pieces during install, the Omni Cubed Pro-Dolly is rated 750 lb per dolly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow much weight can the Aardwolf Economy Fabrication Table carry?\u003c\/h4\u003e\n\u003cp\u003eThe Aardwolf Economy Fabrication Table has a manufacturer-published working load limit of 440 lb (200 kg).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat size is the table top?\u003c\/h4\u003e\n\u003cp\u003eThe table surface measures 70-7\/8 in. x 23-5\/8 in. (1800 x 600 mm) and stands 39-1\/8 in. (995 mm) high overall.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes it need assembly?\u003c\/h4\u003e\n\u003cp\u003eYes. The table ships flat-packed and is assembled on arrival, which is what keeps its freight cost down.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWill it roll and will it stay still?\u003c\/h4\u003e\n\u003cp\u003eIt runs on four wheels, two of which lock, so it can be repositioned and then locked for work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWill it fit through a standard doorway?\u003c\/h4\u003e\n\u003cp\u003eThe table is 23-5\/8 in. wide, which clears a standard doorway.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170153459932,"sku":"AAW AEFT","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/1389132f-d193-4e0b-acda-cf9652aa8530.jpg?v=1786056469"},{"product_id":"apron-aardwolf","title":"Aardwolf Workwear Apron – Printed PVC, Waterproof","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cdiv class=\"intro\"\u003e\n\u003cp\u003eThe Aardwolf Workwear Apron is a printed PVC waterproof apron from Aardwolf's Workwear line, part number 600036, worn over shop clothing to keep water and slurry off the wearer during wet stone fabrication.\u003c\/p\u003e\n\u003cp\u003eIt is a wet-work garment rather than a protective one: the PVC sheet stops water, and nothing about it is rated for cut, impact or chemical protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"key-features\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinted PVC construction, waterproof\u003c\/li\u003e\n\u003cli\u003eAardwolf Workwear line, manufacturer part number 600036\u003c\/li\u003e\n\u003cli\u003eSized for wear over normal shop clothing at wet cutting, grinding and polishing stations\u003c\/li\u003e\n\u003cli\u003eSold by Aardwolf under the same number through its own regional storefronts, so replacement is a straight reorder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ideal-for\"\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eFabricators, countertop installers and stone masons who spend the day at a wet saw, a wet polisher or a wet edge station and want the water off their front.\u003c\/p\u003e\n\u003cp\u003eNot the apron to choose if you need a stated size or coverage area: Aardwolf publishes no length, width or color for part 600036, so if the garment has to fit a specific person or meet a stated coverage, buy an apron whose dimensions are published, such as the Xpeed GK Fabricator's Tough Apron at 35 in. x 47 in. or the long-sleeved Alpha Multi-Purpose Waterproof Apron at 55 x 60 in. It also covers the torso only, so pair it with WEHA Waterproof Arm Sleeve Protectors if your forearms are in the spray.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs this a genuine Aardwolf product?\u003c\/h4\u003e\n\u003cp\u003eYes. Part 600036 is an Aardwolf Workwear item, listed by Aardwolf India as the Printed PVC Apron and carried under the same number by Aardwolf's own regional storefronts; the all-numeric part number is simply how Aardwolf codes its workwear line.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the apron made of?\u003c\/h4\u003e\n\u003cp\u003ePrinted PVC. The PVC sheet is what makes the apron waterproof.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWill it keep water off at a wet saw?\u003c\/h4\u003e\n\u003cp\u003eA waterproof printed PVC apron blocks water and slurry thrown at the front of the body, which is the exposure at a wet saw, wet polisher or wet edge station.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDoes it protect my arms?\u003c\/h4\u003e\n\u003cp\u003eNo. This is a front-torso apron with no sleeves; forearm exposure needs a separate sleeve protector such as the WEHA Waterproof Arm Sleeve Protectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aardwolf","offers":[{"title":"Default Title","offer_id":52170155655388,"sku":"AAW 600036","price":29.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/35529ec8-bc88-453c-a111-4cd49864cdec.jpg?v=1786056482"},{"product_id":"pro-dolly-hd1","title":"Omni Cubed Pro-Dolly – 22 in. x 11 in. x 9 in., 750 lb Capacity per Dolly","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Pro-Dolly HD1 is a 22 in. x 11 in. x 9 in. low-profile slab dolly rated at 750 lb per dolly, with an integrated clamp opening to 2.88 in. (73 mm), a 5.38 in. rail height and 8 in. non-marking flat-free tires. The whole dolly weighs 21 lb.\u003c\/p\u003e\n    \u003cp\u003eThe low rail is what makes it useful indoors: a top sits close to the ground so it clears a standard doorway on the dolly. Each dolly is sold singly, and the 750 lb figure is published per dolly.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e750 lb capacity per dolly\u003c\/li\u003e\n\u003cli\u003e5.38 in. rail height for doorway clearance\u003c\/li\u003e\n\u003cli\u003e22 in. x 11 in. x 9 in., 21 lb\u003c\/li\u003e\n\u003cli\u003eIntegrated clamp with a 2.88 in. (73 mm) opening\u003c\/li\u003e\n\u003cli\u003e8 in. non-marking, flat-free tires\u003c\/li\u003e\n\u003cli\u003eCompatible with the Aqua-Jaw Carry Vise\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\u003cli\u003eOne Pro-Dolly HD1\u003c\/li\u003e\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eInstallers moving finished tops through finished interiors, where headroom under a doorway matters more than ground clearance. Long tops are commonly run on two dollies so the load is carried at both ends.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is the capacity of the Pro-Dolly HD1?\u003c\/h4\u003e\n\u003cp\u003eOmni Cubed publishes 750 lb per dolly. Each unit is sold singly, so a pair of dollies is two purchases.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow low does the top sit?\u003c\/h4\u003e\n\u003cp\u003eThe support rail sits 5.38 in. off the ground, which is what gives the clearance to roll a top through a standard doorway.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow thick a piece can the clamp hold?\u003c\/h4\u003e\n\u003cp\u003eThe integrated clamp opens to 2.88 in. (73 mm).\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eShould I use one dolly or two?\u003c\/h4\u003e\n\u003cp\u003eA long top is usually run on two dollies so it is supported at both ends and does not pivot; a short piece can be moved on one.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat is better for outdoor and rough ground?\u003c\/h4\u003e\n\u003cp\u003eA low-profile dolly is built for finished interiors. For gravel, thresholds and site debris, an all-terrain cart such as the Omni Cubed Pro-Cart with 750 lb capacity has 14.5 in. of ground clearance and larger wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170159915228,"sku":"OCI PDHD1","price":525.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/90f83f07-5208-489e-96b5-264318d46b98.jpg?v=1786057121"},{"product_id":"pro-stealth-seamer-manual","title":"Omni Cubed Stealth Seamer Seam Setter – 8 in. Cups, Manual","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe Omni Cubed Pro Stealth Seamer Manual is a single vacuum seam setter unit with 8 in. cups and four leveling points, measuring 20 in. x 9 in. x 4 in. and weighing 13 lb, used to join and level a countertop seam with the cups charged by hand.\u003c\/p\u003e\n    \u003cp\u003eRead the pack before comparing it with the Auto model: this is one unit with two cup covers, no vacuum pump and no case. The Auto version of the same 8 in. cup seam setter is a two-unit kit with a pump and a case, which is where most of the price difference between the two sits.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e8 in. cups charged by hand - no pump, no battery, no charger\u003c\/li\u003e\n\u003cli\u003eFour leveling points for bringing the two sides of a joint into plane\u003c\/li\u003e\n\u003cli\u003eOne unit with two cup covers; no case supplied\u003c\/li\u003e\n\u003cli\u003e20 in. x 9 in. x 4 in., 13 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"whats-included\"\u003e\n    \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003eOne Pro Stealth Seamer unit\u003c\/li\u003e\n\u003cli\u003eTwo cup covers\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eInstallers and small shops that want 8 in. cup seam setting without a pump to charge, and fabricators adding a single unit to a seam setter they already own. Crews setting long seams routinely usually want two units, which is how the Auto kit is supplied.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow many units are in this pack?\u003c\/h4\u003e\n\u003cp\u003eThe Omni Cubed Pro Stealth Seamer Manual is one seam setter unit with two cup covers. There is no vacuum pump and no case in the pack.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhy is the Manual so much cheaper than the Auto?\u003c\/h4\u003e\n\u003cp\u003eBecause it is a different quantity of tool: the manual pack is a single unit with no pump and no case, while the Omni Cubed Stealth Seamer Seam Setter with 8 in. cups, Auto is two units plus a vacuum pump and a storage case.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow is vacuum maintained without a pump?\u003c\/h4\u003e\n\u003cp\u003eThe cups are charged by hand on this manual model. The pack is one seam setter unit and two cup covers, with no vacuum pump and no case.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat are its dimensions and weight?\u003c\/h4\u003e\n\u003cp\u003eThe unit measures 20 in. x 9 in. x 4 in. and weighs 13 lb.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eDo I need two seam setters for one seam?\u003c\/h4\u003e\n\u003cp\u003eOne unit sets and levels a joint at a single point; a long seam is normally worked with two so both sides of the run are controlled at once.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Omnicubed","offers":[{"title":"Default Title","offer_id":52170159980764,"sku":"OCI 8129-PSM-19","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/5b2b4c0d-bf67-4f89-82f6-cfaa89d847cd.jpg?v=1786057122"},{"product_id":"pistol-grip-suction-cup","title":"Pistol Grip Suction Cup – 2-3\/4 in. Cup, One-hand Pistol Grip","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"intro\"\u003e\n    \u003cp\u003eThe RTC Pistol Grip Suction Cup is a one-hand vacuum lifting cup with a 2-3\/4 in. (70 mm) pad and a pistol-grip lever, rated by RTC for up to 33 lb (15 kg).\u003c\/p\u003e\n    \u003cp\u003eThe pistol grip is the point: the cup is set and pumped down with the same hand that carries it, leaving the other hand free to guide a tile into place. Like every vacuum cup it needs a smooth, clean, non-porous face to seal against.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"key-features\"\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n\u003cli\u003e2-3\/4 in. (70 mm) cup\u003c\/li\u003e\n\u003cli\u003eUp to 33 lb (15 kg), as published by RTC for this model\u003c\/li\u003e\n\u003cli\u003eOne-hand pistol-grip operation\u003c\/li\u003e\n\u003cli\u003eSeals on smooth, non-porous surfaces such as glazed tile and polished stone\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ideal-for\"\u003e\n    \u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n    \u003cp\u003eTile setters positioning and lifting individual tiles, and anyone who needs a spare hand while placing them. Larger or heavier pieces need a cup with a bigger pad and a higher published rating.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq\"\u003e\n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eHow much will the RTC pistol grip cup lift?\u003c\/h4\u003e\n\u003cp\u003eRTC publishes up to 33 lb (15 kg) for this model, on a 2-3\/4 in. (70 mm) cup.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWhat if the piece is heavier than 33 lb?\u003c\/h4\u003e\n\u003cp\u003eUse a larger cup with its own published rating rather than doubling up on a small one — the A. Bottini Plastic Suction Cup covers 40 lb on a 5 in. pad, and the Wood's Powr-Grip 8 in. flat vacuum cup is rated at 125 lb.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eWill it hold on textured or unpolished tile?\u003c\/h4\u003e\n\u003cp\u003eA vacuum cup needs a smooth, non-porous surface to seal. Textured, honed-porous, riven or structured faces leak, and the cup will release without warning.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n\u003ch4\u003eIs the published cup diameter 2-3\/4 in. or 3 in.?\u003c\/h4\u003e\n\u003cp\u003eRTC's specification block states 2-3\/4 in. (70 mm). The page heading on the same URL says 3 in., which the manufacturer has not reconciled; the specification block is the figure used here.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Russo Trading Company","offers":[{"title":"Default Title","offer_id":52170161160412,"sku":"RTC STPG","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/5713\/7116\/files\/c057fc5f-eef7-42f1-910d-9e704e6af72a.jpg?v=1786057130"}],"url":"https:\/\/obsidian-industrial.com\/collections\/material-handling.oembed","provider":"Obsidian Industrial","version":"1.0","type":"link"}